Siemens 6ES7131-4BF50-0AA0 SIMATIC ET 200S 8 DI Source Input Module
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Hot Selling Models
- Recommended Products
Overview
- Confirm source-input operation and the L+ signal-voltage reference.
- Allow for the fixed 2–4.5 ms input delay.
- Keep two-wire sensor quiescent current within 1.5 mA.
- Apply the shielded or unshielded cable-length limit.
- Use green channel LEDs for local state indication and account for the absence of module diagnostics.
6ES7131-4BF50-0AA0 SIMATIC ET 200S 8 DI Source Input Module
An eight-channel 24 V DC source-input module with fixed input filtering and individual channel status indicators.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6ES7131-4BF50-0AA0 |
| Product Type | Source-input digital module |
| Core Function | Reading negative-switching sensor signals |
| Application | ET 200S distributed I/O stations |
Eight source inputs
The input thresholds use the source-input voltage convention relative to L+.
Fixed filtering
Both input transitions have a specified delay of 2–4.5 ms.
Compact station module
The module is 15 mm wide and receives its supply from the power module.
Product Overview
6ES7131-4BF50-0AA0 collects eight 24 V DC source-input signals in an ET 200S station. Its input characteristic follows IEC 61131 type 1 and the module supports isochronous operation.
The input delay is fixed, with no parameter setting for filtering. Green LEDs show the channel states, while the module provides neither a diagnostic function nor a red SF group-error indicator.
Key Functions
Acquire source-input signals
Eight channels receive negative-switching sensor signals with the specified voltage thresholds.
Filter input transitions
A non-configurable 2–4.5 ms delay applies to rising and falling transitions.
Show local channel states
A green indicator is provided for each input channel.
Official Specifications
| Digital inputs | 8 |
|---|---|
| Rated supply | 24 V DC from the power module |
| Reverse-polarity protection | Yes |
| Typical power loss | 1.2 W |
| Input characteristic | IEC 61131 type 1 |
| Source-input voltage thresholds relative to L+ | Signal 0: −5 to +30 V; signal 1: −30 to −15 V |
| Typical signal-1 current | 6 mA at 24 V |
| Input delay, both transitions | 2–4.5 ms; not parameterizable |
| Maximum cable length | 1000 m shielded; 600 m unshielded |
| Two-wire sensor connection | Supported; maximum quiescent current 1.5 mA |
| Diagnostics | No diagnostic function or red SF group-error LED |
| Channel status indicators | Green LED per input |
| Electrical separation | Inputs separated from the backplane bus; no separation between channels |
| Insulation test voltage | 500 V DC |
| Isochronous mode | Supported |
| Dimensions | 15 × 81 × 52 mm (W × H × D) |
| Approximate weight | 35 g |
Frequently Asked Questions
Which input voltage reference should I use for 6ES7131-4BF50-0AA0?
The source-input signal voltages are evaluated relative to L+.
Can I adjust the filtering time of 6ES7131-4BF50-0AA0?
The input delay is fixed at 2–4.5 ms for both transition directions.
What is the two-wire sensor limit for 6ES7131-4BF50-0AA0?
The maximum permissible sensor quiescent current is 1.5 mA.
Which cable-length limits apply to 6ES7131-4BF50-0AA0?
The maximum length is 1000 m for shielded cable and 600 m for unshielded cable.
Does 6ES7131-4BF50-0AA0 provide a red SF fault indicator?
It has green channel-status LEDs but no red SF LED or diagnostic function.
Are the input channels of 6ES7131-4BF50-0AA0 isolated from one another?
The channels share a potential group and are isolated from the backplane bus.
Where does 6ES7131-4BF50-0AA0 receive its 24 V supply?
The ET 200S power module provides the rated 24 V DC supply.