Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
siemens 6es5304 3ub11 simatic s5 im 304 interface module-0

For SIEMENS

Home >  Products >  For SIEMENS

Siemens 6ES5304-3UB11 SIMATIC S5 IM 304 Interface Module

Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months

  • Overview
  • Hot Selling Models
  • Recommended Products
Overview
SIMATIC S5 expansion interfaces

6ES5304-3UB11 SIMATIC S5 IM 304 Interface Module

An IM 304 central-side interface for symmetrical distributed S5 bus connections over distances of up to 600 m per expansion interface.

At a Glance

Brand Siemens
Model 6ES5304-3UB11
Product Type Central-rack interface electronics
Core Function Extend the controller bus
Application S5 central controllers and expansion units

Distributed expansion links

Up to four receiving IM314 or IM314H/R modules can be connected per interface, over a maximum distance of 600 m to the last receiver.

Multiplexed S5 bus transfer

The 16-bit address bus and 16-bit data bus share 16 transmission lines using time-division multiplexing.

Fault-tolerant controller coupling

The lower X4 connector supports the appropriate IM324U/R coupling arrangement for compatible fault-tolerant systems.

Product Overview

6ES5304-3UB11 extends the central-controller bus to compatible S5 expansion equipment through symmetrical RS485 signaling.

Two parallel interfaces transmit a 16-bit address bus and a 16-bit data bus by time-division multiplexing, while front jumpers adapt operation to the cable length and system arrangement.

Ordering focus: Match the central controller, receiving IM314 or fault-tolerant interface, cable length and final bus termination.
Key Functions

Distributed expansion links

Up to four receiving IM314 or IM314H/R modules can be connected per interface, over a maximum distance of 600 m to the last receiver.

Multiplexed S5 bus transfer

The 16-bit address bus and 16-bit data bus share 16 transmission lines using time-division multiplexing.

Fault-tolerant controller coupling

The lower X4 connector supports the appropriate IM324U/R coupling arrangement for compatible fault-tolerant systems.

Official Specifications
Expansion interface count 2 parallel symmetrical interfaces
Electrical transmission standard Differential RS485
Address and data width 16-bit address bus and 16-bit data bus
Multiplexing Time-division multiplexing over 16 common lines
Transmission-rate range 100 kB/s–2 MB/s
Maximum expansion-link length 600 m per interface to the last IM314 or IM314H/R
Receiver capacity Maximum 4 receiving interface modules per interface
Maximum IM324U link 100 m through X4
Maximum IM324R link 10 m through X4
Approximate module current 1.2 A
Backplane connectors Two 48-pin connectors, ES902 row 2
Front connectors Two 50-pin male connectors
Front-panel width 20.32 mm; 1⅓ standard slots
Circuit-board format Double Eurocard, 233.4 × 160 mm
Operating temperature 0 to +55 °C
Maximum relative humidity 95% at 25 °C, non-condensing
Maximum operating altitude 1,500 m above sea level
Permitted device potential difference Maximum 7 V
Approximate module mass 360 g
Frequently Asked Questions

Which receiver should I pair with 6ES5304-3UB11 for a standard expansion unit?

Use an IM314-3UA11 on the expansion-unit side of the symmetrical connection.

How far can the last expansion receiver be from 6ES5304-3UB11?

The maximum cable length per interface is 600 m and the actual length must be set at the central-side module.

How many expansion receivers can I chain from one interface of 6ES5304-3UB11?

A maximum of four IM314 or IM314H/R receiving modules can be connected per interface.

Which connector on 6ES5304-3UB11 handles fault-tolerant controller coupling?

Use the lower front connector X4 for the compatible IM324U/R controller link.

Which terminator finishes a standard IM314 chain driven by 6ES5304-3UB11?

The final IM314 in each group requires a 6ES5760-1AA11 terminator.

Which termination is required for an IM314H/R chain connected to 6ES5304-3UB11?

The final IM314H/R requires the 6ES5760-0HA11 terminator.

What potential difference can the connected S5 devices tolerate with 6ES5304-3UB11?

The potential difference between two connected S5 devices must not exceed 7 V.

Compatibility & Ordering Notes
Before ordering 6ES5304-3UB11: Match the central controller, receiving IM314 or fault-tolerant interface, cable length and final bus termination.

Before installation

  • Set the cable-length jumpers for the actual expansion-link length.
  • Use the appropriate IM314, IM314H/R or IM324U/R receiving interface for the system.
  • Fit the correct terminator to the final receiver of every group.
  • Lock front connectors with their metal catches and provide equipotential bonding between S5 devices.
Hot Selling Models
MOD13/1X074-007
Mod1/1X027-029
505197101
EU-8S/0.5
MOD1/1X657-028 TDM1.2-100-300-W1
BES00U0 BES 516-349-E4-C-03
PKZM0-1-T XTPT001BC1NL
6ES5756-0AA11
3NA3 254
3842 516 713
QUINT-PS/3AC/24DC/20
6ES5951-7NB13
CD85N25-50C-B
4138.140
PR9648-1-00-00-0-00 0707-20760-MD

Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
email goToTop

Evolo Automation is not an authorized distributor unless otherwise specified, representative, or affiliate of the manufacturer of this product. All trademarks and documents are the property of their respective owners and are provided for identification and informational.