Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
siemens 6ep1333 2ba20 sitop psu100s 24 v 5 a power supply-0

For SIEMENS

Home >  Products >  For SIEMENS

Siemens 6EP1333-2BA20 SITOP PSU100S 24 V 5 A Power Supply

Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months

  • Overview
  • Hot Selling Models
  • Recommended Products
Overview
SITOP smart PSU100S

6EP1333-2BA20 SITOP PSU100S 24 V 5 A Power Supply

A narrow SITOP smart supply with automatic 120/230 V AC range selection, adjustable 24 V DC output and a 24 V OK relay contact.

At a Glance

Brand Siemens
Model 6EP1333-2BA20
Product Type Stabilized DIN-rail power supply
Core Function Isolated DC control power
Application Industrial control cabinets

Automatic AC range selection

The supply selects between the 85–132 V and 170–264 V AC input ranges without a manual input selector.

Power reserve for load transients

The output supports a 150% rated-current overload for up to 5 seconds per minute under the specified operating conditions.

Remote DC status

A normally open 24 V OK relay contact provides a separate status signal rated for 60 V DC at 0.3 A.

Product Overview

6EP1333-2BA20 supplies stabilized DC power with automatic selection between the 120 V and 230 V AC input ranges.

The 50 mm-wide housing combines an adjustable output, overload capability and a relay signal for remote monitoring of the DC supply, supporting control circuits that need both power and a status indication.

Ordering focus: Match the automatic input ranges, 5 A rated load, required overload duty and 50 mm upper and lower ventilation spaces.
Key Functions

Automatic AC range selection

The supply selects between the 85–132 V and 170–264 V AC input ranges without a manual input selector.

Power reserve for load transients

The output supports a 150% rated-current overload for up to 5 seconds per minute under the specified operating conditions.

Remote DC status

A normally open 24 V OK relay contact provides a separate status signal rated for 60 V DC at 0.3 A.

Official Specifications
Nominal AC input 120/230 V AC, single phase, automatic range selection
Permissible input windows 85–132 V AC or 170–264 V AC
Line frequency 47–63 Hz; nominal 50/60 Hz
Rated output 24 V DC, 5 A
Output adjustment 22.8–28 V DC by potentiometer
Additional continuous output Up to 6 A at ambient temperatures up to 45 °C
Overload duty 150% of rated output current for up to 5 s per minute
Mains buffering At least 20 ms at rated output current and 93/187 V input
Maximum residual ripple 150 mV; typically 30 mV
DC status contact Normally open relay contact; 60 V DC, 0.3 A
Typical efficiency 88%
Typical rated-load power loss 16 W
Current limitation Constant-current characteristic; response 6–7.1 A
Protection IP20; electrical protection class I
Operating temperature −25 to +70 °C with natural convection; output derating applies
Dimensions 50 × 125 × 120 mm
Ventilation clearance 50 mm above and below; no side spacing required
Terminal conductors 0.5–2.5 mm², screw terminals
Mounting rail EN 60715, 35 × 7.5/15 mm
Net weight 0.5 kg
Frequently Asked Questions

Do I need to change an input selector when moving 6EP1333-2BA20 from 120 V to 230 V AC?

The supply selects the appropriate input range automatically.

Can 6EP1333-2BA20 operate at any AC voltage between 85 and 264 V?

The permitted input windows are 85–132 V and 170–264 V AC rather than one continuous range.

How can a PLC monitor the output status of 6EP1333-2BA20?

Use the normally open 24 V OK relay contact within its rating of 60 V DC and 0.3 A.

Can 6EP1333-2BA20 continuously supply 6 A in a cool cabinet?

The output range extends to 6 A at ambient temperatures up to 45 °C.

How much short-duration overload is available from 6EP1333-2BA20?

The normal-operation overload capability is 150% of rated output current for up to 5 seconds per minute.

What free space should I keep above and below 6EP1333-2BA20?

Provide 50 mm of ventilation clearance above and below the housing.

Can the DC output of 6EP1333-2BA20 be adjusted below 24 V?

The output potentiometer permits adjustment from 22.8 to 28 V DC.

Compatibility & Ordering Notes
Before ordering 6EP1333-2BA20: Match the automatic input ranges, 5 A rated load, required overload duty and 50 mm upper and lower ventilation spaces.

Before installation

  • Keep the AC supply within one of the two permitted input windows.
  • Apply the temperature-dependent output limits when sizing continuous and overload demand.
  • Connect the 24 V OK relay contact within its DC switching rating.
  • Maintain 50 mm free space above and below the DIN-rail-mounted supply.
Hot Selling Models
S30-5-G50-1
EZM071HF-K5LOZ-E55CL-Q
53 50062 9245
TMCP-SB 0916602
6EC1002-2A
WAS4CCC DC 84449806
ipf VL600114
6ES5464-8MF11
EDS-208
RT/57120/M/25
PTE4.501.6522B
5763510620 CD01-5/2 AS-024DC
efector100 IG0094 IGA2008-BBOA
3SB1804-0AC
UG144P

Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
email goToTop

Evolo Automation is not an authorized distributor unless otherwise specified, representative, or affiliate of the manufacturer of this product. All trademarks and documents are the property of their respective owners and are provided for identification and informational.