EN
Siemens SIMATIC HMI OP17/DP12 Operator Panel 6AV3617-1JC30-0AX1
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Product Overview
- Key Functions
- Official Specifications
- Frequently Asked Questions
- Compatibility & Ordering Notes
- Hot Selling Models
- Recommended Products
Overview
SIEMENS · SIMATIC HMI
6AV3617-1JC30-0AX1 SIMATIC HMI OP17/DP12 Operator Panel
The OP17/DP12 is a text-based operator panel with an LED-backlit LC display, native controller drivers and a 12 Mbit/s PROFIBUS DP interface.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6AV3617-1JC30-0AX1 |
| Product Type | text-based PROFIBUS operator panel |
| Core Function | Provides key-operated machine control and a backlit multi-line text display |
| Application or Compatible Series | Legacy SIMATIC S5, S7, M7 and 505 systems using PROFIBUS DP |
Exact Identification
Match 6AV3617-1JC30-0AX1 character by character and confirm the complete SIMATIC HMI OP17/DP12 Operator Panel designation.
Interface Arrangement
Confirm the installed supply, ports, field connections and required accessories before wiring the replacement.
Configuration Check
Preserve the approved engineering project, network parameters and application data used by the installed system.
Product Overview
The OP17/DP12 is a text-based operator panel with an LED-backlit LC display, native controller drivers and a 12 Mbit/s PROFIBUS DP interface.
Two line-density modes support compact machine messages and menus. Native drivers cover several established Siemens controller families. The DP12 variant must retain its bus address, project and termination arrangement.
Key Functions
Text-Based Operator Interface
Two line-density modes support compact machine messages and menus.
Legacy Controller Connectivity
Native drivers cover several established Siemens controller families.
PROFIBUS Panel Integration
The DP12 variant must retain its bus address, project and termination arrangement.
Official Specifications
| Display Type | Monochrome LC display |
|---|---|
| Backlight | LED |
| Compact Text Format | 4 lines x 20 characters |
| Expanded Text Format | 8 lines x 40 characters |
| Controller Families | SIMATIC S5, 505, S7 and M7 |
| Driver Type | Native drivers |
| Fieldbus | PROFIBUS DP |
| Maximum Fieldbus Rate | 12 Mbit/s |
| Approval | UL/CSA listed |
| Packaging Dimensions | 28.9 x 26.1 x 8.4 cm |
| Net Weight | 1.116 kg |
| Lifecycle Status | End of product lifecycle |
| Successor Article | 6AV3617-1JC30-0AX2 |
Frequently Asked Questions
What should an engineer verify about display type before replacing 6AV3617-1JC30-0AX1?
Confirm Monochrome LC display and compare it with the installed hardware, wiring and saved configuration before removal.
How should backlight be matched when commissioning 6AV3617-1JC30-0AX1?
Use LED, then retain the matching interface, project and parameter settings during commissioning.
Is 6AV3617-1JC30-0AX1 suitable when the project requires the stated compact text format?
It supports 4 lines x 20 characters; the complete system must also meet the electrical, mechanical and engineering requirements.
What installation check applies to expanded text format on 6AV3617-1JC30-0AX1?
Verify 8 lines x 40 characters, complete the associated wiring or configuration checks and record the result before startup.
Can 6AV3617-1JC30-0AX1 be substituted without confirming controller families?
No. Confirm SIMATIC S5, 505, S7 and M7 together with the connector arrangement and project settings before approving a replacement.
Why does driver type matter when integrating 6AV3617-1JC30-0AX1?
The required condition is Native drivers; a mismatch can prevent communication, correct control or safe operation.
What should be tested for fieldbus after installing 6AV3617-1JC30-0AX1?
Test operation with PROFIBUS DP, review diagnostics and complete the required functional and safety checks before service.
Compatibility & Ordering Notes
Compatibility Checklist
- Match display type (Monochrome LC display) to the installed system.
- Verify backlight (LED) before changing wiring or configuration.
- Back up all available project, parameter and network data, then complete the required functional and safety checks.
