EN
Siemens 6DL1193-6TP00-0DN0 SIMATIC ET 200SP HA N0 Terminal Block with M Distributor
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Hot Selling Models
- Recommended Products
Overview
- Use an I/O module compatible with the N0 terminal-block arrangement.
- Assign the left-side process terminals according to the installed I/O module.
- Reserve the right-side M terminals for the connected I/O loads.
- Enable the new-potential-group setting in HW Config.
- Apply the group-current limit for the installed terminal-block count and the 2 A process-terminal limit.
- Provide the specified supply-line protection and apply the horizontal or vertical temperature limit.
6DL1193-6TP00-0DN0 SIMATIC ET 200SP HA N0 Terminal Block with M Distributor
A light-colored N0 terminal block with 64 push-in process and distributor terminals, a new potential group and an M-potential distributor for two-wire actuator connections.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6DL1193-6TP00-0DN0 |
| Product Type | Type N0 terminal block |
| Core Function | Starting a load group and distributing actuator return connections |
| Application | Compatible ET 200SP HA I/O modules |
Actuator return distribution
The right-hand M distributor serves the loads connected to the I/O module.
New potential group
The light-colored block opens a new group rather than using the group on its left.
Group-current planning
Permissible group current depends on how many terminal blocks are installed.
Product Overview
6DL1193-6TP00-0DN0 provides the light-colored N0 terminal-block arrangement for ET 200SP HA, combining process-signal connections with an M-potential distribution row for connected actuators.
The 45 mm block begins a new load group, with its left-side signal assignments determined by the I/O module and the right-side M connections reserved for the corresponding two-wire loads.
Key Functions
Distribute the actuator ground reference locally
The right-hand distributor provides M connections for the actuators connected to the I/O module, reducing the need for separate external return terminals.
Open a separately supplied potential group
The light-colored terminal block permits a new potential group instead of carrying on the group from its left neighbor.
Provide process wiring and electrical separation
Push-in terminals carry the module-specific process connections with the specified separation from the backplane, supply and functional ground.
Official Specifications
| Rated Supply Voltage | 24 V DC |
|---|---|
| Process-Terminal Layout | 32 I/O process terminals on the left |
| M-Distributor Layout | 32 M terminals numbered 33–64 plus four M supply-bus connections |
| Terminal Connection Method | Push-in |
| Maximum Process-Terminal Current | 2 A |
| Maximum Group Current | Up to 10 A at 70 °C; limit depends on installed terminal-block count |
| Group-Current Derating by Block Count | 4 blocks: 10 A; 5: 8 A; 6: 7 A; 7: 6 A; 8: 5 A; 10: 4 A; 15: 3 A; 20: 2 A |
| Backplane-to-Supply Isolation Test | 3000 V DC for 1 minute, type test |
| Other Separation Tests | 1500 V DC for 1 minute for process-to-supply and potential-group/FE separation |
| Identification and Maintenance Data | I&M data supported |
| Horizontal Operating Temperature | −40 to +70 °C |
| Vertical Operating Temperature | −40 to +60 °C |
| Dimensions (Width × Height × Depth) | 45 × 175 × 77 mm |
| Approximate Weight | 155 g |
Frequently Asked Questions
Can I use the M distributor on 6DL1193-6TP00-0DN0 as a common ground terminal for unrelated devices?
The right-hand M terminals are reserved for the loads connected to the I/O module and must not serve unrelated devices.
What should I select in HW Config when commissioning 6DL1193-6TP00-0DN0?
Enable the new-potential-group setting for the light-colored terminal block from commissioning onward.
Where are the actuator return connections on 6DL1193-6TP00-0DN0?
Terminals 33–64 and the additional M supply-bus connections form the right-hand M distributor.
Can a potential group with twenty terminal blocks using 6DL1193-6TP00-0DN0 carry 10 A?
The listed permissible load current for twenty terminal blocks is 2 A.
Does 6DL1193-6TP00-0DN0 provide the terminal-block arrangement for I/O redundancy?
The N0 distributor arrangement is not the redundant terminal-block variant.
Can I use 6DL1193-6TP00-0DN0 for terminal-block reference-junction temperature detection?
The N0 arrangement does not provide temperature detection.
Which supply-line protection can I use with 6DL1193-6TP00-0DN0?
Use the specified 24 V DC, 10 A type B or C protection arrangement, an appropriately rated quick-response fuse or an electronic fuse with a corresponding characteristic.
