EN
Siemens SIMATIC ET 200SP HA 6DL1132-6BH00-0PH1 DQ 16×24 VDC/0.5 A HA Modulus Emissionis Digitalis
Fabricator: Siemens
Condición: Nuevo
Plazo de Entrega: En Stock
Origo: Germania
Garantía: 12 Meses
Inscriptio electronica: [email protected]
whatsapp: +86-18150117685
- Conspectus
- Hot Selling Models
- Producta commendata
Conspectus
- Ordinae blocus terminalis separatim et selige M1 pro operatione redundantia.
- Pensa usque ad 0.5 A per output et applica limitem currentis aggregati pro temperatura installationis.
- Configura monitorationem diagnosticam et reactionem CPU STOP pro processo.
SIEMENS SIMATIC ET 200SP HA • DIGITAL OUTPUT
6DL1132-6BH00-0PH1 DQ 16×24 V DC/0.5 A HA Digital Output Module
A 16-channel 24 V DC sourcing output module with channel diagnostics for ET 200SP HA.
Ad Primum Aspectum
| Nota | Siemens |
|---|---|
| Modellum | 6DL1132-6BH00-0PH1 |
| Typus Producti | Modulus Exitus Digitalis |
| Functio principalis | 16-channel 24 V DC load switching |
| Series Compatible | SIMATIC ET 200SP HA |
Sourcing Outputs
Sixteen digital outputs switch 24 V DC loads at up to 0.5 A per channel.
Diagnostics Canalium
Short circuit and wire break can be monitored on individual channels.
Configuratio Redundans
A paired module can use the M1 terminal block for I/O redundancy.
Product Overview
6DL1132-6BH00-0PH1 est le module de sortie numérique DQ 16x24VDC/0.5A HA pour SIMATIC ET 200SP HA. Ses seize canaux sourcing pilotent des charges 24 V CC et offrent une surveillance diagnostique sélectionnable.
Le module fonctionne avec des blocs de bornes H1 ou M1 ; le type M1 prend en charge une disposition redondante à deux modules. Le bloc de bornes est commandé séparément, et ce module peut être configuré par PCS 7 V9.0 ou version ultérieure.
Key Functions
Commutation d’actionneur
Commutent seize charges 24 V CC à un courant nominal de 0.5 A par canal.
Signalement de défaut
Signale, pour chaque canal, les conditions de rupture de fil et de court-circuit, ainsi que l’absence de tension d’alimentation.
Disposition redondante de sortie
Prend en charge deux modules identiques sur le bloc de bornes M1 pour une commande redondante.
Official Specifications
| Versio Firmamentalis | V1.0 |
|---|---|
| Typus Blockus Terminalis | H1 aut M1 |
| Tensio nominalis supplicii | 24 V DC |
| AMPLITUDO ADMISSIBILIS FONDIS | 19,2–28,8 V CC |
| Consumptione de Currente sine Onere | 60 mA nominalis; 70 mA maximum |
| Maxima Spatium Adressarum | 2 octets de sortie plus 2 octets QI |
| Maxima Currentia Interruptendi Onus Resistivum | 0,5 A per canalēm |
| Maxima onus lampadis | 5 w |
| Intervalum Resistentiae Onus | 48 Ω ad 12 kΩ |
| Limis Responsionis ad Curtum Circuitum | 0.7–1.3 A typica |
| Currentia Pro Examinando Interruptionem Filorum | 0.7 mA |
| Typicum Tempus Retardationis Ad Activandum | 50 µs cum onere resistivo |
| Typicum Tempus Retardationis Ad Deactivandum | 100 µs cum onere resistivo |
| Maxima Currentia Output Moduli ad 70 °C | 3 A, installatio horizontalis |
| Maxima Longitudo Cavi Scutati | 1000 m |
| Longitudo Maximae Cavi Non Scuti | 600 m |
| Tested Isolation | 1500 V DC for 1 min |
| Latitudo Moduli | 22,5 mm |
Quaestiones Frequenter Rogatae
Which terminal block should I use with 6DL1132-6BH00-0PH1 for redundancy?
Use an M1 terminal block with two identical modules for a redundant arrangement.
Can I diagnose a broken output wire on 6DL1132-6BH00-0PH1?
The module supports channel-by-channel wire-break diagnostics using a 0.7 mA test current.
What load current can 6DL1132-6BH00-0PH1 switch on each channel?
Each channel can switch a resistive load of up to 0.5 A.
How should I configure 6DL1132-6BH00-0PH1 in PCS 7?
Use PCS 7 V9.0 or later to configure the module and its channel parameters.
Does 6DL1132-6BH00-0PH1 keep an output state after a CPU stop?
The configurable CPU STOP reaction can shut down the output or retain its last value.
How far can I run a shielded cable from 6DL1132-6BH00-0PH1?
The maximum shielded cable length is 1000 m.
What current limit applies to 6DL1132-6BH00-0PH1 at 70 °C?
For horizontal installation at 70 °C, the combined module output current is limited to 3 A.
