Siemens 6ES7322-1BL00-0AA0 SIMATIC S7-300 SM 322 modulo de output digital

Conspectus

Siemens SIMATIC S7-300

6ES7322-1BL00-0AA0 SIMATIC S7-300 SM 322 Modulus Output Digitalis

Praebet 32 output transistoricos pro valvulis solenoidalis CC, contactoribus et lampis signorum, cum gruppis isolatis electricis et indicatione status per canalum.

Ad Primum Aspectum

Nota	Siemens
Modellum	6ES7322-1BL00-0AA0
Typus Producti	Modulus Exitus Digitalis
Functio principalis	Commutat actuatoria campi CC
Applicatio	Stationes automationis S7-300

Circuits output aggregati

Quattuor gruppi de octo output separant circuits oneris.

Front connector wiring

A 40-pin front connector carries the actuator connections.

Load-aware installation

Group-current limits depend on cabinet temperature and mounting position.

Product Overview

6ES7322-1BL00-0AA0 is an SM 322 output module for operating 24 V DC field loads from a SIMATIC S7-300 station. Its 32 channels are electrically isolated in groups of eight and provide a rated output current of 0.5 A per channel.

Electronic short-circuit protection limits output faults, while individual green LEDs show channel status; the module does not provide diagnostic interrupts or readable channel diagnostics.

Focus ordinandi: Size each output group for its mounting position and ambient temperature, and include the 40-pin front connector in the installation plan.

Key Functions

Drive DC switching loads

The outputs operate solenoid valves, DC contactors and signal lamps within the specified current and lamp-load limits.

Separate field potential groups

Groups of eight channels are isolated from one another and from the backplane bus for grouped load-circuit wiring.

Indicate active channels locally

A green LED per channel provides a direct view of the output state during commissioning and maintenance.

Official Specifications

Output Channel Arrangement	32 channels in 4 electrically isolated groups of 8
Tensio nominis oneris	24 V DC
Currentis Output Aestimatus	0.5 A per channel; permitted ON-state range 5 mA to 0.6 A
Group Current, Horizontal Mounting	4 A up to 40 °C; 3 A up to 60 °C
Group Current, Vertical Mounting	2 A up to 40 °C
Consumptio currentis dorso-planae	Maximum 110 mA
Currente de alimentation sine onere	Maxime 160 mA
Dissipatio Energiae Typica	6,6 W
Tensione in stato ON in output	Al minus L+ minus 0,8 V
Currente residuale in stato OFF	Massimo 0,5 mA
Tempus Retardationis Commutationis Egressus	Tempus maximus pro transitione OFF ad ON: 100 µs; tempus maximus pro transitione ON ad OFF: 500 µs pro cargis resistive
Permitted Load Resistance	48 Ω ad 4 kΩ
Onus Lampae	Potentia maxima per output: 5 W
Frequentias maximas de commutatione	100 Hz pro cargis resistive; 0,5 Hz pro cargis inductive DC13; 10 Hz pro lampades
Electronica tutela contra curtum circuitum	Limite typicalis responsionis 1 A
Tensio Probae Isolationis	500 V DC
Coniunctio Actuatoris	conector Anterior 40-Pin
Dimensiones Moduli	40 × 125 × 120 mm (W × H × D)

Fons officialis: Siemens product manual and technical specifications

Quaestiones Frequenter Rogatae

Quot outputus solenoidis-valvulae 6ES7322-1BL00-0AA0 praebet?

Modulus 32 outputus praebet, quorum singuli 24 V DC et 0.5 A per canallem sunt.

Num 6ES7322-1BL00-0AA0 connexiones frontales connectoris pro machinis mobilibus sustinet?

Utere connectori frontali 40-pin pro connexione outputus et supply of load.

Quomodo 6ES7322-1BL00-0AA0 in armario horizontaliter collocato ad 60 °C reducendum est?

Limita totalem currentem outputus uniuscuiusque gruppi ad 3 A ad 60 °C.

Num outputus 6ES7322-1BL00-0AA0 paralleli fieri possunt ut maior currentis capacitas obtineatur?

Non, outputus paralleli permitti tantummodo pro controllo redundantis oneris intra eundem gruppus, nec ad augendam capacitatem outputus uti possunt.

Num 6ES7322-1BL00-0AA0 interruptum diagnosticum pro defectu canalis mittet?

No, the module provides channel-status LEDs but has no diagnostic interrupt or readable diagnostic function.

What lamp load can I connect to an output of 6ES7322-1BL00-0AA0?

Each output can switch a lamp load of up to 5 W.

What should I consider when switching the 24 V supply to 6ES7322-1BL00-0AA0 with a mechanical contact?

The circuit design can produce an ON signal of approximately 50 µs at the outputs when the load supply is switched on.

Compatibility & Ordering Notes

Before ordering 6ES7322-1BL00-0AA0: Choose the connector and load wiring for the four potential groups, then check the per-channel loads and temperature-dependent group current before ordering.

Compatibility Checklist for 6ES7322-1BL00-0AA0

• Configure the correct module and output addresses in the STEP 7 project.
• Keep redundant parallel outputs within the same output group.
• Akunten pri la mallonga ŝaltiĝa impulso kie konektitaj aparatoj detektas rapidajn signalojn.
• Uzu kanalajn LED-ojn por lokaj statokontroloj kaj ne atendu modulajn diagnozajn interrompojn.

Hot Selling Models