Siemens 6ES7193-6BP00-0DA0 SIMATIC ET 200SP BU15-P16+A0+2D BaseUnit

Conspectus

SIEMENS SIMATIC ET 200SP

6ES7193-6BP00-0DA0 SIMATIC ET 200SP BU15-P16+A0+2D BaseUnit

A light-colored A0 BaseUnit with 16 push-in process terminals, two supply-bus connections, and an integrated filter for a separately supplied ET 200SP load group.

Ad Primum Aspectum

Nota	Siemens
Modellum	6ES7193-6BP00-0DA0
Typus Producti	A0 BaseUnit
Functio principalis	Starts a new station load group
Applicatio	Compatible ET 200SP I/O modules

Separate load-group supply

The light-colored base opens a new potential group.

Direct process wiring

Sixteen push-in process terminals connect the I/O module.

Nulla fila auxiliaris

Haec versio compacta non habet terminales AUX aut add-on.

Product Overview

6ES7193-6BP00-0DA0 formet novum gruppus oneris ET 200SP utendo dispositione terminalium BU15-P16+A0+2D.

Eius filtrum integratum, separata suppletio potentialis-gruppi et optio connexio scuti permittunt compactam positionem 15 mm pro connexionibus sine addita fila terminalium auxiliarium.

Focus ordinandi: Utere dispositione novi-gruppi levis coloris ubi nova suppletio requiritur, et considera absentiam terminalium AUX et add-on.

Key Functions

Separare proximum gruppus potentialis

Unitas Basalis incipit novum gruppus potius quam pontificare suppletionem a gruppo ad sinistram suam.

Connecte signa I/O et suppletionem

Decem-sex terminalia processus et duae connexiones suppletionis P1/P2 praebent puncta connexionis moduli.

Integrare filtrationem suppletionis

Filtrum integratum includitur, et connectio scuti integrata in systema addi potest ut optio.

Official Specifications

Tensio nominalis supplicii	24 V DC
Dispositio Terminalis Processus	16 terminales ad inserendum; nullae terminales AUX aut add-on
Connexiones Bus Alimentationis	Duo terminalia connectuntur ad P1 et P2
Maxima Currentia Bus P1/P2	10 A
Maximum Process-Terminal Current	2 A
Protectio Lineae Supplicationis	interruptor circuitus minimus 24 V DC, 10 A cum characteristicis B vel C
Insulation Type-Test Voltage	707 V DC
Sectio Transversa Conductoris	0,14–2,5 mm² (AWG 26–14)
Temperatura operativa horizontalis	−30 to +60 °C
Temperatura operativa verticalis	−30 to +50 °C
Altitudo Installationis Maxima	5 000 m; restrictiones valent supra 2 000 m
Minimum Dew Point	−60 °C, pro applicationibus in camera arida
Etiquettae Colorum Terminalium Processus	CC00–CC09
Dimensionum totalium	15 × 117 × 35 mm (latitudo × altitudo × profunditas)
Pondus Approximatum	40 g

Fons officialis: Folium Data Unitatis Basi Siemens A0

Quaestiones Frequenter Rogatae

Utrum 6ES7193-6BP00-0DA0 utendum est ut gruppus oneris ad sinistram continuetur?

Haec Unitas Basi clara novum gruppus potentialis incipit, non autem gruppus ad sinistram continuat.

Can I land additional AUX wires on 6ES7193-6BP00-0DA0?

The base has neither AUX terminals nor add-on terminals.

How do I protect the supply lines feeding 6ES7193-6BP00-0DA0?

Use a 24 V DC, 10 A miniature circuit breaker with a B or C tripping characteristic.

What is the difference between the bus and process limits on 6ES7193-6BP00-0DA0?

The P1/P2 buses carry up to 10 A, while each process terminal is limited to 2 A.

Can I add a shield connection to 6ES7193-6BP00-0DA0?

Coniunctio scuti integrata in systemate disponibilis est ut optio.

Which conductor range fits the push-in terminals of 6ES7193-6BP00-0DA0?

The terminals accept 0.14–2.5 mm² conductors, corresponding to AWG 26–14.

What temperature limit changes when I mount 6ES7193-6BP00-0DA0 vertically?

The operating range is −30 to +50 °C vertically compared with −30 to +60 °C horizontally.

Compatibility & Ordering Notes

Before ordering 6ES7193-6BP00-0DA0: Select the A0 new-group base with the required 16 process connections, and provide separate supply protection for the new group.

Compatibility Checklist for 6ES7193-6BP00-0DA0

• Use an ET 200SP I/O module approved for BU type A0.
• Select the light-colored new-group arrangement in the station configuration.
• Provide the separate 24 V DC feed and B- or C-characteristic supply protection.
• Keep the 10 A bus and 2 A process-terminal limits distinct.
• Add the optional shield connection only where the installation requires it.
• Apply the temperature and altitude restrictions for the actual mounting location.

Hot Selling Models