Siemens 6ES7193-4CA20-0AA0 SIMATIC ET 200S TM-E15S24-A1 Modulus Terminalis

Conspectus

Siemens SIMATIC ET 200S

6ES7193-4CA20-0AA0 SIMATIC ET 200S TM-E15S24-A1 Terminalis Modulus

Basis modularis electronicus ET 200S cum terminalibus a viti fixatus et cum auxiliari bus continuo ad A4 et A8 accessibili.

Ad Primum Aspectum

Nota	Siemens
Modellum	6ES7193-4CA20-0AA0
Typus Producti	Electronic module base
Functio principalis	Modular field termination
Applicatio	ET 200S sensor and actuator wiring

Accessus AUX1 per vites

Basis -A1 auxiliarem bus ad latera connectionum campi modularium electronicorum praebet.

Positiones signorum definitae

Signa modularis electronicorum terminalibus 1–3 et 5–7 in dispositione bicolonari utuntur.

Confectio stationis praecablata

Modulum terminalis monta et cabela antequam modulum electronicum correspondens inseras.

Product Overview

6ES7193-4CA20-0AA0 fundamentum terminalis a viti TM-E15S24-A1 pro modularibus electronicis ET 200S 15 mm praebet.

Patro terminalis suum sex positiones ab modulo electronico assignatas cum connectionibus auxiliaribus A4 et A8 coniungit, ita ut AUX1 per totam seriem stationis continuus maneat.

Focus ordinandi: Selige istum basim cum terminalibus ad vitam -A1, ubi etiam conductus AUX1 in positione electronica aditus habere debet.

Key Functions

Coniunge signa et conductus auxiliares

Terminales numerati 1–3 et 5–7 ad modulum electronicum insertum servant; A4 et A8 reservantur ad AUX1.

Distribue potentiale auxiliare

Continuus bus AUX1 ad modulos adiacentes transit et potest praebere connexionem ad conductorem protectorem vel ad alium potentiale.

Parate antea conductus arcae

Hic basis installari et connecti potest absque partibus electronicis, ita ut opus in terminalibus seorsum a coniectura moduli maneat.

Official Specifications

Terminal arrangement	2 × 4 connexiones
Ars Coniungendi	Fistulae fixationis
Enrutamiento de AUX1	Continuo al grupo de potencial a la izquierda
Accessus Terminalis AUX1	A4 et A8
Rango de conductores sólidos y flexibles desnudos	0,14–2,5 mm²
Rango de conductores flexibles con casquillo	0,14–1,5 mm²
Longitudo Exscindendae Partis Filii	11 mm
Conductors per Connection	1; alternativamente 2 sumando hasta 1,5 mm² en un casquillo compartido
Diametrum maximum insulationis fili	3.1 mm ad 1.5 mm²; 3.8 mm ad 2.5 mm²
Instrumentum filorum	Tornus cum lamina 3 mm
Par de torsion pro terminalibus	0.4–0.7 N·m
Dimensiones (L × H × D)	15 × 132 × 43 mm
Pondus Moduli Approximatum	65 g

Fons officialis: Manuale moduli terminalis Siemens · Installatio et connexio ET 200S

Quaestiones Frequenter Rogatae

Num 6ES7193-4CA20-0AA0 signa electronica et bus conductoris protectoris in eadem positione coniungere potest?

Ita est: modulus electronicus terminales 1–3 et 5–7 utitur, dum A4 et A8 connexionem AUX1 ad conductorem protectorem praebere possunt.

Does 6ES7193-4CA20-0AA0 support Defined signal positions for mobile equipment?

No, the -A1 layout uses A4 and A8 for AUX1 instead of assigning all eight numbered positions to the electronic module.

What should I consider before applying an extra voltage to AUX1 on 6ES7193-4CA20-0AA0?

The selected auxiliary potential must suit the application and its continuity to the group on the left, with the bus limited to 230 V AC.

Is a 2.5 mm² bare conductor allowed on 6ES7193-4CA20-0AA0?

Yes, the screw terminals accept bare solid or flexible conductors from 0.14 to 2.5 mm².

How do I avoid overtightening the terminals of 6ES7193-4CA20-0AA0?

Use a torque-controlled 3 mm screwdriver set within the specified 0.4–0.7 N·m range.

Do I need the electronic module installed to wire 6ES7193-4CA20-0AA0?

No, the terminal module can be completely wired before inserting the matching electronics.

Should I disconnect adjacent wiring to change only the terminal box of 6ES7193-4CA20-0AA0?

The terminal box can be replaced without removing the terminal module from the rail, so base removal is not required for that operation.

Compatibility & Ordering Notes

Before ordering 6ES7193-4CA20-0AA0: Match the electronic module terminal assignment to the -A1 screw base, plan the A4/A8 auxiliary potential and count five terminal modules per packing unit.

Compatibility Checklist for 6ES7193-4CA20-0AA0

• Use A4 and A8 only for the intended AUX1 connection.
• Match electronic signals to terminals 1–3 and 5–7.
• Keep the continuous auxiliary bus consistent across the station.
• Prepare 11 mm stripped ends and control the screw torque.

Hot Selling Models