Siemens 6ES7132-4HB00-0AB0 SIMATIC ET 200S 2RO NO Relay Output Module

Conspectus

Siemens SIMATIC ET 200S

6ES7132-4HB00-0AB0 SIMATIC ET 200S 2RO NO Modulus outputus rellay

Modulus rellay bi-canalis, apertus normaliter, pro oneribus usque ad 120 V DC aut 230 V AC, cum alimentatione moduli 24 V DC et limitibus currentis dependentibus a temperatura.

Ad Primum Aspectum

Nota	Siemens
Modellum	6ES7132-4HB00-0AB0
Typus Producti	Modulus Output Relais
Functio principalis	Commutatio isolata onerum campestrium
Applicatio	ET 200S gruppi potentialis 24 V DC

Contactus rellay isolati

Duo canales rellay sunt isolati electricamente inter se et ab arcula dorsali.

Currentis dependentia a temperatura

Unusquisque outputus permittit usque ad 5 A ad 50 °C et usque ad 4 A ad 60 °C.

Protectio externa outputus

The relay outputs need external 6 A fuse protection.

Product Overview

6ES7132-4HB00-0AB0 switches two field circuits through normally open relay contacts in an ET 200S station.

Its module electronics require a 24 V DC potential group even when the isolated relay contacts switch an AC load, and the selected load voltage and category determine contact life.

Focus ordinandi: Keep the relay module in a 24 V DC supply group, retain the product-level-dependent bridging arrangement and provide the required external output fuses.

Key Functions

Switch AC or DC field loads

The isolated relay-contact arrangement accepts loads up to 120 V DC or 230 V AC within the permitted switching capacity.

Separate the two output circuits

The relay channels are electrically isolated from one another and from the module supply and backplane.

Indicate output state

A green LED for each channel shows its commanded state without a module diagnostic function.

Official Specifications

Output contact arrangement	2 normally open relay outputs
Rated module-electronics supply	24 V DC
Maximum switched load voltage	120 V DC or 230 V AC
Maximum channel current by temperature	5 A up to +50 °C; 4 A up to +60 °C
Minimum switching load	17 V and 8 mA
Maxima Currus ab L+	30 mA
Perdita de Potentia Typical del Modulo	0,6 W
Maximum load-cable length	600 m non schermati; 1 000 m schermati
Isolatio relais	Inter canales et inter output, suppletio moduli et planum dorsale
Examinatio isolationis inter output et bus, necnon inter output et suppletionem	1 500 V AC
Examinatio isolationis inter suppletionem et planum dorsale	500 V DC
Frequentias maximas de commutatione	onus resistivum aut lamparum 2 Hz; onus inductivum 0.5 Hz
Fusibilis externus output	6 A requiruntur
Limitatio interna tensionis inductivae	Nullus
Coniunctio output parallela	Non permittitur pro redundantia aut incremento currentis
Indicatio status	LED Viridis per Canal
Dimensiones (L × H × D)	15 × 81 × 52 mm
Pondus Moduli Approximatum	50 g

Fons officialis: Manuale originale del sistema Siemens ET 200S

Quaestiones Frequenter Rogatae

Possumne ponere 6ES7132-4HB00-0AB0 in gruppus potentiae ET 200S qui 230 V AC supplet?

Non, electronica moduli ex gruppus potentiae 24 V DC suppleri debet.

Potestne unumquodque output 6ES7132-4HB00-0AB0 5 A ad temperaturam ambientem 60 °C ferre?

Non, currentis per canalem permisus ad 60 °C ad 4 A limitatur.

Necesse estne mihi fusibile extra 6ES7132-4HB00-0AB0 pro output relais?

Ita, unumquodque output relais protectione fusibilis externi 6 A indiget.

Possumne duos contactus 6ES7132-4HB00-0AB0 in parallelum coniungere ut currentem oneris augerem?

Non, coniunctio output in parallelum non permittitur ad augmentum currentis vel ad controllem oneris redundans.

Possumne circuitum SELV cum circuitu non-SELV in duobus canalibus 6ES7132-4HB00-0AB0 miscere?

Non, si unus canalis SELV vel PELV tensionem bassam gerit, alter canalis etiam SELV vel PELV tensionem bassam gerere debet.

Quae differentia in connexione observanda est, si productum prius gradus 6ES7132-4HB00-0AB0 substituitur?

A gradu 2 interne pontis inter terminales 2 et 6 non est; igitur, si pontis substitutio necessaria est, externus inter terminales 3 et 7 faciendus est.

Num 6ES7132-4HB00-0AB0 directe signum 5 V parvae currentis commutare potest?

Non, minimum oneris commutandi specificatum est 17 V et 8 mA.

Compatibility & Ordering Notes

Antequam 6ES7132-4HB00-0AB0 ordinatur: Conservare gruppus suppeditationis 24 V DC, fusibiles externos, et rectam pontificationem pro gradu producti; et onus rellais ex eius voltatione, categoria utilisationis, et limite temperaturae seligere.

Index compatibilitatis pro 6ES7132-4HB00-0AB0

• Appliare protectionem fusibilis externi 6 A pro output.
• Usare maximum 4 A per canallem ad +60 °C.
• Servare separationem SELV/PELV trans utrumque canallem.
• Examinare arrangementum pontis quando mutatur gradus producti.

Hot Selling Models