EN
Siemens 6ES7132-4BD02-0AA0 SIMATIC ET 200S 4DO DC24V/0.5A ST Digital Output Module
Fabricator: Siemens
Condición: Nuevo
Plazo de Entrega: En Stock
Origo: Germania
Garantía: 12 Meses
Inscriptio electronica: [email protected]
whatsapp: +86-18150117685
- Conspectus
- Hot Selling Models
- Producta commendata
Conspectus
- Match the chosen TM-E15 terminal layout to the four channel assignments.
- Keep individual actuator current within the output rating.
- Do not parallel outputs to increase capacity.
- Includere l’impulso di uscita breve all’accensione nelle applicazioni con contatore veloce.
6ES7132-4BD02-0AA0 SIMATIC ET 200S 4DO DC24V/0.5A ST Digital Output Module
A four-channel standard output module for 24 V DC actuators, with 0.5 A rated current per channel and short-circuit protection.
Ad Primum Aspectum
| Nota | Siemens |
|---|---|
| Modellum | 6ES7132-4BD02-0AA0 |
| Typus Producti | Modulus Exitus Digitalis |
| Functio principalis | Discrete actuator switching |
| Applicatio | ET 200S distributed I/O stations |
Four actuator channels
Switch solenoid valves, DC contactors or indicator lamps from the distributed I/O station.
Data processus conpacta
Quattuor bitus exirentes conpactari possunt, non unum integrum byte ad singulum modulum assignando.
Visible Channel State
LED viridis ad singulum exirentem statum eius imperatum ostendit.
Product Overview
6ES7132-4BD02-0AA0 quattuor circuitus oneris DC in stazione ET 200S commutat, voltationem oneris sui a modulo potentiae associato trahens.
Modulus normalis operationem isochronam sustinet et exirentes contra cortocircuitum tutos praebet, cum limitibus separatis pro commutatione resistiva, inductiva et lamparum.
Key Functions
Onere DC distributo impellere
Singulus exirens currentem nominalem 0.5 A gerit, cum currente exirente totali 2 A per modulum.
Allocationem adressionum exirentium minuere
Configuratio conpacta quattuor bitus exirentes utitur, dum allocatio normalis unum byte utitur.
Activatio output monitor localiter
Quattuor LED virides canalium indicant output activos sine necessitate nuntii diagnosticis.
Official Specifications
| Output Channel Count | 4 |
|---|---|
| Tensio nominis oneris | 24 V DC ab modulo potentiae |
| Rated Output Current per Channel | 0,5 A; ambitus permissibilis signi-1: 7–600 mA |
| Current totalis output per modulo | 2 A |
| Maxima onus lampadis | 5 w |
| Intervalum Resistentiae Onus | 48 Ω–3,4 kΩ |
| Minimum voltatio output signi-1 | L+ minus 1 V |
| Maximae dilationes activationis et deactivationis | 50 µs et 120 µs respective, cum onere resistivo |
| Maxima ratio commutationis oneris resistivi | 800 Hz |
| Tarifas de commutatio pro oneribus inductivis et lamparum | 2 Hz et 10 Hz respective |
| Longitudines maximae cableorum non scutatorum et scutatorum | 600 m et 1000 m respective |
| Allocatio adressuum output | 1 byte normaliter; 4 bit quando compacta |
| Longitudo Parametri | 1 octetum |
| Maxima currentis sine onere ex L+ | 10 mA per canalium |
| Dissipatio typica potestatis moduli | 0,8 W |
| Dispositio isolationis canalium | Nulla isolatio inter canales; isolatio ab omnibus planis dorsalis |
| Differentia Potentialis Inter-Circuitus Permissa | 75 V CC ou 60 V CA |
| Testis voltagii isolationis | 500 V DC |
| Latitudo Moduli | 15 mm |
| Pondus Moduli Approximatum | 40 g |
Quaestiones Frequenter Rogatae
Can 6ES7132-4BD02-0AA0 operate four 0.5 A valves at the same time?
Yes, the rated 0.5 A per output and 2 A total module current permit that combination when the installation and load conditions remain within their limits.
Can I parallel the outputs of 6ES7132-4BD02-0AA0 to supply a larger actuator?
No, connecting outputs in parallel to increase output capacity is not permitted.
How quickly can 6ES7132-4BD02-0AA0 repeatedly switch an inductive load?
The specified switching rate for inductive loads is 2 Hz, compared with up to 800 Hz for resistive loads.
How much output address space does 6ES7132-4BD02-0AA0 require when packed?
Packed configuration occupies four output bits instead of the normal one-byte allocation.
Will 6ES7132-4BD02-0AA0 report a diagnostic fault for a failed actuator?
No, this standard module has channel status LEDs but no diagnostic function.
Which field terminals carry the four signals on 6ES7132-4BD02-0AA0?
The outputs are assigned to terminals 1, 5, 2, and 6 for channels 0, 1, 2, and 3 respectively.
What transient should I consider when energizing the power group of 6ES7132-4BD02-0AA0 through a mechanical contact?
Depending on the circuit, the outputs can carry a signal-1 pulse of approximately 50 µs when the rated load voltage is connected through a mechanical contact.
