177230-01-01-05 Seismic Transmitter

Overview

Place of Origin:	USA
Brand Name:	Bently Nevada
Model Number:	177230-01-01-05
Minimum Order Quantity:	1
Packaging Details:	Original new Factory Sealed
Delivery Time:	5-7 days
Payment Terms:	T/T
Supply Ability:	In stock

Quick Detail

Description

The 177230-01-01-05 Seismic Transmitter is a highly reliable, loop-powered vibration monitoring device designed for rapid installation and seamless integration into industrial automation systems. Engineered for simplicity and durability, this transmitter can be quickly deployed within a programmable logic controller (PLC), distributed control system (DCS), or SCADA-based plant asset management solution, providing continuous monitoring of machinery condition. Its streamlined design minimizes training requirements, lowers maintenance costs, and reduces overall service expenditures, allowing operators to focus on critical maintenance planning and avoid unplanned equipment failures.

Effortless Installation and Integration

The 177230 Seismic Transmitter supports straightforward interfacing with PLCs, control systems, and condition monitoring platforms. It requires minimal setup and no field calibration, enabling maintenance teams to install the transmitter with minimal disruption to operations. The intuitive design shortens the learning curve for operators and technicians, as the interface mirrors standard control system input connections. Fewer supplementary components are needed, making system integration cost-effective. Technical support is available to guide customers in leveraging the transmitter for effective asset monitoring.

Reliable Data and Performance

Providing high-quality vibration data, the 177230 transmitter delivers accurate, repeatable measurements essential for predictive maintenance and early fault detection. It outputs a 4–20 mA signal in an industry-standard format, while also delivering raw vibration data for verification, advanced analysis, and troubleshooting. The protected interface and robust CM (Condition Monitoring) design enhance operational reliability, ensuring consistent performance even in challenging industrial environments.

Safety and Environmental Compliance

Designed with ergonomic and safety considerations in mind, the 177230 Seismic Transmitter supports access to hazardous areas while maintaining operator protection. The device is compliant with industry EHS standards, ensuring safe installation and operation. A built-in self-test function provides ongoing assurance of proper functionality, further enhancing reliability and reducing downtime.

Optimized for Industrial Machinery Monitoring

By integrating the 177230-01-01-05 Seismic Transmitter into your condition monitoring framework, you can improve predictive maintenance strategies, extend equipment life, and prevent catastrophic machinery failures. Its compact, loop-powered design combined with accurate vibration data collection makes it an ideal choice for industrial plants seeking efficient, cost-effective, and dependable monitoring solutions.

In summary, the 177230 Seismic Transmitter offers easy installation, seamless integration, reliable data quality, and EHS compliance, making it an essential tool for proactive machinery asset management in diverse industrial settings.

Applications

The 177230 Seismic Transmitter is designed for robust vibration monitoring and condition assessment across a wide range of industrial environments. Its primary application lies in machinery asset protection, predictive maintenance programs, and plant-wide condition monitoring systems. The device measures vibration velocity from 0 to 25.4 mm/s (0–1.0 in/s) with high fidelity across a frequency range of 10 Hz to 1 kHz (600 to 60 kcps) RMS, making it suitable for detecting early-stage mechanical faults, imbalance, misalignment, or bearing degradation in rotating equipment.

Thanks to its simple, loop-powered 4–20 mA output, the transmitter can be easily integrated into programmable logic controllers (PLCs), distributed control systems (DCS), or SCADA platforms. This seamless integration allows plant engineers to collect real-time vibration data and incorporate it into comprehensive predictive maintenance strategies, helping to reduce unexpected downtime, extend machinery life, and optimize maintenance scheduling.

The 177230 transmitter is built to withstand harsh operating conditions. With an operating temperature range from -40°C to +85°C (-40°F to +185°F), 316L stainless steel housing, and shock survivability up to 1 g peak, it is ideal for demanding industrial environments such as oil and gas facilities, petrochemical plants, power generation units, and mining operations. Electrical isolation exceeds 10^8 ohms, and its isolation breakdown voltage reaches 600 Vrms with minimal leakage, ensuring safe and reliable performance in electrically noisy or hazardous areas.

Multiple approvals, including CSA/NRTL/C and ATEX/IECEx, enable the transmitter to be installed in global industrial sites with hazardous area requirements. Mounting flexibility is provided via M6, M8, or ¼-28 UNF threads, along with a 3-pin MIL-C-5015 stainless steel connector, simplifying installation and replacement in existing monitoring points.

The device emphasizes user-friendly operation and maintenance. It requires minimal training, no field adjustments, and few additional components for complete system integration. Its self-test function, protected interface, and support for a variety of interface cables ensure reliable performance and high-quality vibration data for verification and analysis. By providing accurate, repeatable raw vibration signals, the 177230 transmitter empowers maintenance teams to implement effective predictive maintenance programs, prevent catastrophic failures, and improve overall equipment efficiency.

In summary, the 177230 Seismic Transmitter is ideal for industrial vibration monitoring applications where reliability, data accuracy, ease of integration, and safety compliance are critical. It is particularly suited for machinery monitoring in energy production, manufacturing plants, process industries, and other harsh-duty industrial environments.

Specifications

Competitive Advantage

The 177230 Seismic Transmitter offers a distinct competitive edge in industrial vibration monitoring and condition-based maintenance applications. Its loop-powered design, utilizing a standard 4–20 mA output, allows seamless integration into PLCs, DCS, SCADA systems, or other plant control infrastructures. This plug-and-play capability reduces installation complexity, minimizes training requirements, and lowers overall service and operational costs compared to more complex or proprietary vibration monitoring solutions.

One of the key advantages of the 177230 transmitter is its broad operational range and high measurement precision. With vibration velocity detection from 0 to 25.4 mm/s (0–1.0 in/s) and a frequency response of 10 Hz to 1 kHz (600 to 60 kcps) RMS, the device provides reliable, repeatable, and accurate data. This ensures early fault detection, better predictive maintenance planning, and reduced risk of catastrophic machinery failures, giving users a tangible improvement in equipment uptime and operational efficiency.

Durability and reliability are further enhanced by its robust construction. The 316L stainless steel case, 3-pin MIL-C-5015 connector, and multiple mounting thread options (M6, M8, ¼-28 UNF) support installations in harsh-duty industrial environments, while shock survivability of up to 1 g peak and an operating temperature range from -40°C to +85°C (-40°F to +185°F) make it suitable for extreme conditions. High electrical isolation (>10^8 ohms) and isolation breakdown voltage up to 600 Vrms with minimal leakage ensure safety and compliance with global industrial standards.

The 177230 also stands out for its regulatory approvals, including CSA/NRTL/C and ATEX/IECEx, enabling deployment in hazardous and classified areas worldwide. Its user-friendly features, such as self-test, protected interface, and support for multiple interface cables, simplify operations and maintenance while maintaining high data integrity. By delivering raw vibration signals in a simple format, it provides verification and analysis flexibility unmatched by many competing products.

In summary, the 177230 Seismic Transmitter combines precision measurement, operational simplicity, durability, and regulatory compliance into a compact, loop-powered design. Its ability to reduce downtime, optimize maintenance schedules, and ensure safe, reliable operation in demanding industrial environments establishes it as a superior solution compared to conventional seismic monitoring devices.