330130-075-02-05 3300 XL Standard Extension Cable

Overview

Place of Origin:	USA
Brand Name:	Bently Nevada
Model Number:	330130-075-02-05
Packaging Details:	Original new Factory Sealed
Delivery Time:	5-7 days
Payment Terms:	T/T
Supply Ability:	In stock

Quick Detail

Description

330130-075-02-05 3300 XL Standard Extension Cable is designed for industrial automation and machinery monitoring systems that use 3300 XL 8 mm proximity transducers. The 330130-075-02-05 extension cable provides a fixed length of 7.5 meters (24.6 feet), enabling accurate signal transmission between the proximity probe and Proximitor® sensor in automated vibration and position measurement loops.

Built with a 75 Ω triaxial cable structure and FEP insulation, 330130-075-02-05 supports precise eddy current signal transfer with a typical capacitance of 69.9 pF/m (21.3 pF/ft). This electrical characteristic supports a linear measurement range of 2 mm (80 mils), which is required in automated monitoring of fluid-film bearing machines, rotating shafts, and speed reference systems.

The 330130-075-02-05 extension cable operates within a temperature range of -52°C to +177°C, making it suitable for automation environments exposed to high heat, oil vapor, and mechanical movement. It supports field wiring from 0.2 to 1.5 mm² (16–24 AWG) and includes a connector protector for standard installations. With CSA, ATEX, and IECEx approvals, 330130-075-02-05 is widely used in automated power, oil & gas, and heavy industrial equipment monitoring systems.

Applications

Shaft Vibration Monitoring in Rotating Equipment
In turbine, compressor, and motor monitoring systems, 330130-075-02-05 is used to link 3300 XL 8 mm proximity probes with Proximitor sensors over a fixed 7.5 m distance. The controlled capacitance of 330130-075-02-05 at 69.9 pF/m supports accurate transmission of dynamic vibration signals within the 2 mm (80 mils) linear range. By using a 75 Ω triaxial cable structure, 330130-075-02-05 supports vibration data transfer in automation loops installed near high-current drives and control cabinets.

Axial Shaft Position Measurement for Thrust Bearings
In thrust bearing monitoring systems, 330130-075-02-05 carries axial position signals from proximity probes installed near thrust collars. The defined electrical parameters of 330130-075-02-05 support consistent signal behavior across the full operating temperature range of -52°C to +177°C. The fixed 7.5 m length of 330130-075-02-05 allows predictable routing from bearing housings to automation panels without excess cable affecting signal response.

Speed Reference and Keyphasor Signal Routing
For automated speed measurement and reference pulse detection, 330130-075-02-05 connects proximity probes used for shaft marker detection. The triaxial shielding and typical capacitance of 330130-075-02-05 reduce signal distortion when routed alongside control wiring. This allows 330130-075-02-05 to support reliable pulse transmission in speed control and overspeed protection systems.

High-Temperature Machinery and Enclosure Installations
In environments such as gas turbines, steam turbines, and high-temperature pump skids, 330130-075-02-05 operates within a temperature range up to +177°C. The FEP-insulated cable construction of 330130-075-02-05 supports installation near hot surfaces and inside machinery enclosures where thermal exposure is common, enabling continuous data flow to automation monitoring systems.

Specifications

Competitive Advantage

Controlled Electrical Parameters for Automation Loops
The 69.9 pF/m capacitance and 75 Ω cable structure of 330130-075-02-05 allow predictable signal behavior, supporting repeatable measurements in automated vibration and position systems.

High-Temperature Operation in Machinery Enclosures
With an operating range up to +177°C, 330130-075-02-05 can be routed through turbine casings, compressor skids, and pump housings without additional thermal protection.

Certified Use in Regulated Industrial Areas
CSA, ATEX, and IECEx approvals enable 330130-075-02-05 to be installed in automation systems used in oil and gas, power generation, and heavy industrial environments where certified components are required.