Siemens 6SL3162-2BD00-0AA0 SINAMICS 43 A DC Link Adapter
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Hot Selling Models
- Recommended Products
Overview
- Use the 43 A version for the compatible module width.
- Keep the DC supply within 495–720 V and the continuous current within 43 A at 55 °C.
- Size and protect cables for the total demand of all supplied components.
- Use end sleeves with protective collars and the specified stripping length and tightening torques.
- Mount at the far right when supplying several adjacent components.
- After isolation, allow the specified discharge time and verify that DCP and DCN are de-energized.
6SL3162-2BD00-0AA0 SINAMICS 43 A DC Link Adapter
A 43 A DC-link adapter with screw connections for 0.5–10 mm² conductors, intended for direct DC infeed to compatible Booksize modules.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6SL3162-2BD00-0AA0 |
| Product Type | Direct-infeed DC-link accessory |
| Core Function | Connecting an external DC supply to the module busbars |
| Application | Compatible 50 mm and 100 mm Booksize line or motor modules |
43 A continuous current
The adapter carries 43 A continuously at a 55 °C ambient temperature.
Direct DC connection
DCP and DCN connections accept the specified external DC-link supply.
Defined cable termination
Single-core connections accept 0.5–10 mm² conductors with an 11 mm stripped length.
Product Overview
6SL3162-2BD00-0AA0 provides direct DC-link infeed to a compatible Booksize component through the module’s DC-link busbar connections.
It is preferably used to supply an individual component; an approved arrangement can also feed adjacent components when the adapter is placed on the far-right component and the lineup extends to the left.
Key Functions
Supply the DC link directly
The adapter connects an external DC supply to DCP and DCN instead of relying on a directly connected incoming module busbar link.
Terminate the supply conductors
Screw terminals accept single-core 0.5–10 mm² connections, using an 11 mm stripped length and 1.8 Nm terminal torque.
Support a defined component lineup
For several adjacent components, the adapter mounts at the far right and the cable current rating must cover all connected components.
Official Specifications
| DC Supply Voltage | 495–720 V DC |
|---|---|
| Continuous Current Capacity | 43 A at 55 °C |
| Maximum Ambient Temperature | 55 °C |
| Single-Core Conductor Cross-Section | 0.5–10 mm² (AWG 20–6) |
| Conductor Stripping Length | 11 mm |
| DC Cable-Terminal Tightening Torque | 1.8 Nm, slotted screwdriver 0.8 × 4.0 mm |
| Busbar-Fixing Screw Tightening Torque | 1.8 Nm, Torx TX20 |
| Adapter-Fixing Screw Tightening Torque | 0.8 Nm, Torx TX10 |
| Weight | 0.05 kg |
Frequently Asked Questions
Can 6SL3162-2BD00-0AA0 supply a single Booksize component directly?
The 43 A adapter is intended for direct DC-link infeed and is preferably used to supply an individual component.
Where should 6SL3162-2BD00-0AA0 sit when feeding several adjacent components?
The adapter must mount on the far-right component with the component lineup extending to the left.
Can I terminate a 16 mm² conductor in 6SL3162-2BD00-0AA0?
The supported single-core cable cross-section is 0.5 to 10 mm².
How much insulation should I strip for the connection to 6SL3162-2BD00-0AA0?
The specified stripped length is 11 mm.
What torque applies to the cable terminals on 6SL3162-2BD00-0AA0?
The cable-terminal tightening torque is 1.8 Nm.
Is 6SL3162-2BD00-0AA0 the correct adapter for a 72 A continuous-current requirement?
This adapter is rated for 43 A continuous current at 55 °C.
How long must I wait before opening the DC-link protective flap to work on 6SL3162-2BD00-0AA0?
Wait at least five minutes after power-off and verify that DCP and DCN are de-energized before starting work.