Siemens 6GT2002-0GA00 MOBY ASM 475 RFID Interface Module
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Hot Selling Models
- Recommended Products
Overview
- Match the 0GA00 hardware rather than substituting 0GA10 parameters.
- Use the supported MOBY I/E/F reader modes.
- Retain the correct ASM address and channel selection.
- Check the FC 45 application and installed hardware-catalog integration.
- Exclude the commands and repetition functions reserved for 0GA10.
6GT2002-0GA00 MOBY ASM 475 RFID Interface Module
An ASM 475 interface for two parallel reader channels in centralized S7-300 or distributed ET 200M systems.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6GT2002-0GA00 |
| Product Type | Identification-system interface module |
| Core Function | Exchanging data with identification readers |
| Application | SIMATIC S7-300 and ET 200M |
Two parallel channels
The interface addresses reader channels 1 and 2 independently.
MOBY I/E/F operation
The 0GA00 version supports the earlier MOBY system modes.
FC 45 integration
The SIMATIC application uses FC 45 and the configured ASM channel parameters.
Product Overview
6GT2002-0GA00 connects MOBY identification readers to a SIMATIC control system. The ASM 475 can be installed centrally with an S7-300 or in an ET 200M distributed I/O station.
Two parallel channels support reader and transponder commands. The 0GA00 hardware uses its own distributed-address sequence and has a different available function set from the parameterizable 0GA10 version, so the order-number suffix and the application parameters must be retained during replacement.
Key Functions
Link two reader channels
Channel selection separates application requests for the two parallel readers.
Read and write transponder data
Normal commands provide writing, reading and initialization of the connected transponder.
Integrate with the SIMATIC application
FC 45 uses the ASM address and channel parameters to coordinate reader requests.
Official Specifications
| Reader-channel capacity | 2 parallel channels |
|---|---|
| MOBY system modes for this hardware | MOBY I, E and F |
| Distributed ASM-address sequence | 256, 272, 288, … |
| Normal command codes | 01: write; 02: read; 03: initialize; 0A: antenna on/off for MOBY F |
| Host communication format | Cyclic control word with acyclic command and acknowledgement telegrams |
| User data per read/write telegram | 1–233 bytes |
| Transfer-counter encoding | 2 bits each for command and acknowledgement counters; four states (0–3) |
| Transponder start-address field | 2 bytes, most-significant byte followed by least-significant byte |
Frequently Asked Questions
Can I install 6GT2002-0GA00 centrally or in distributed I/O?
The ASM 475 can operate centrally in an S7-300 or in a distributed ET 200M station.
Can 6GT2002-0GA00 communicate with two readers in parallel?
The interface provides two parallel reader channels selected as channel 1 or 2.
Can I use MOBY U readers with 6GT2002-0GA00?
MOBY U support in this ASM 475 generation requires the 0GA10 version.
Which distributed address sequence applies to 6GT2002-0GA00?
The distributed ASM addresses follow 256, 272, 288 and subsequent sixteen-byte steps.
Which function should my SIMATIC application use with 6GT2002-0GA00?
The ASM 475 is addressed through FC 45 with the corresponding ASM address and channel parameters.
Does 6GT2002-0GA00 provide the command-repetition feature of 0GA10?
The command-repetition feature is available on the 0GA10 version.
Can I use the extra reader-status and MDS-status commands of 0GA10 on 6GT2002-0GA00?
The additional commands marked for 0GA10, including codes 04, 08 and 0B, are not available on this version.