Siemens 6GK1905-0AA00 SIMATIC NET PROFIBUS PA SpliTConnect Tap
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Hot Selling Models
- Recommended Products
Overview
- Use the specified PROFIBUS FC Process Cable and compatible stripping tool.
- Follow strand color coding and orient the shield-contact metal side toward the strand holder.
- Assemble all three ports correctly, including the sealing disk on unused entries.
- Provide cable strain relief independently of the tap.
- Use the SpliTConnect Clip for flat-surface or 35 mm rail mounting.
- Use the M4 grounding thread when the installation requires a ground bond.
- Take the bus segment out of operation before assembly work.
6GK1905-0AA00 SIMATIC NET PROFIBUS PA SpliTConnect Tap
A three-port PROFIBUS PA tap with insulation-displacement contacts, a PBT enclosure and IP67 protection for correctly assembled field connections.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6GK1905-0AA00 |
| Product Type | Fieldbus distribution tap |
| Core Function | Branches a PA segment to connect field devices |
| Application | PROFIBUS PA segments using FC Process Cable |
Three fieldbus connections
Three cable connections support the PA segment and field-device branches.
Insulation-displacement contacts
The contact assembly connects the unstripped conductors through the coded strand holders.
Sealed field installation
Unused ports require the specified sealing parts, and cable strain relief is provided separately.
Product Overview
6GK1905-0AA00 branches a PROFIBUS PA segment to connect process field devices through three cable ports.
The tap uses integrated insulation-displacement contacts and a PBT housing, with sealed cable entries for the specified field installation; it is intended for PROFIBUS FC Process Cable and is supplied in manufacturer packs of ten units.
Key Functions
Branch the PA fieldbus segment
Three cable connections distribute the PROFIBUS PA link at 31.25 kbit/s.
Terminate the coded cable assemblies
The strand holder and contacting element make the insulation-displacement connection while maintaining the prescribed conductor coding.
Seal and mount the assembled tap
Correctly assembled cable or blanking parts maintain the enclosure protection, while the SpliTConnect Clip supports flat-surface or rail mounting.
Official Specifications
| PROFIBUS PA transmission rate | 31.25 kbit/s |
|---|---|
| Electrical cable connections | 3 |
| Conductor contact method | Integrated insulation-displacement contacts |
| Enclosure material | PBT, polybutylene terephthalate |
| Dimensions (W × H × D) | 84 × 54 × 49 mm |
| Net weight per tap | 250 g |
| Mounting options | 35 mm DIN rail or flat surface, using the SpliTConnect Clip |
| Operating, storage and transport temperature | −40 to +85 °C |
| Enclosure protection | IP67 with the field connections correctly assembled and unused ports sealed |
| Optional ground connection | M4 thread on the contacting element |
Frequently Asked Questions
Which cable is required for 6GK1905-0AA00?
Use PROFIBUS FC Process Cable with the SpliTConnect tap system.
Should individual wire insulation be removed before fitting the strand holder of 6GK1905-0AA00?
The strand holder is fitted over the unstripped conductors for the insulation-displacement connection.
Which way should the shield-contact metal face point inside 6GK1905-0AA00?
The metal side of the shield-contacting element must face the strand holder.
Can an unused port on 6GK1905-0AA00 be left open?
Close the unused port with its nut, seal, sealing disk, shield-contacting element and strand holder in the prescribed order.
Does 6GK1905-0AA00 provide strain relief for the fieldbus cable?
The tap does not provide cable strain relief, so the cable must be supported separately.
How can 6GK1905-0AA00 be bonded to ground when required?
Use the M4 thread on the contacting element for the optional ground connection.
Can 6GK1905-0AA00 be assembled while its PA segment remains in service?
Mounting work on the SpliTConnect components must be carried out only on a bus segment that is not in operation.