Siemens 6ES7290-6AA20-0XA0 S7-200 I/O Expansion Cable
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Hot Selling Models
- Recommended Products
Overview
- Use one expansion cable at most in the CPU and module chain.
- Retain the required module order when relocating an existing assembly.
- Keep the total expansion-module logic load within the CPU power budget.
- Maintain cooling space and separate signal wiring from power circuits.
6ES7290-6AA20-0XA0 S7-200 I/O Expansion Cable
A 0.8 m extension for the S7-200 expansion bus, allowing expansion modules to be positioned beyond a single adjacent row.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6ES7290-6AA20-0XA0 |
| Product Type | I/O bus extension cable |
| Core Function | Flexible placement of expansion modules |
| Application | CPU 22x expansion layouts |
0.8 m reach
Provides a fixed extension between sections of the I/O expansion chain.
Ribbon connection
Uses a 10-pin ribbon connection with male and female ends.
One per chain
Only one extension cable is permitted in each CPU and expansion-module chain.
Product Overview
6ES7290-6AA20-0XA0 extends the I/O bus between a CPU 22x and its expansion modules within a SIMATIC S7-200 installation. Its fixed length supports a more flexible cabinet arrangement when a continuous adjacent module row is impractical.
The extension preserves the existing expansion chain rather than adding another controller or a separate fieldbus segment. Cabinet planning still needs to account for the CPU logic-power budget, module order, cooling clearance and signal-cable routing.
Key Functions
Rearrange the expansion layout
Use the cable to separate portions of an S7-200 expansion assembly while retaining the I/O expansion-bus connection.
Connect the ribbon bus
The male and female 10-pin ends connect the expansion path between the corresponding CPU or module connections.
Preserve installation clearances
Allow at least 25 mm above and below S7-200 devices and at least 75 mm of cabinet depth when laying out the connected equipment.
Official Specifications
| Cable length | 0.8 m |
|---|---|
| Connector design | 10-pin ribbon, male and female ends |
| Extension limit | One cable per CPU and expansion-module chain |
| Approximate weight | 67 g |
Frequently Asked Questions
Can I move the expansion modules to another mounting row with 6ES7290-6AA20-0XA0?
The 0.8 m cable supports a more flexible arrangement of the S7-200 I/O expansion chain within the cabinet.
Can two 6ES7290-6AA20-0XA0 cables be joined to extend the bus farther?
Only one expansion cable is allowed in a CPU and expansion-module chain.
Which bus connector should I provide for 6ES7290-6AA20-0XA0?
The expansion connection uses a 10-pin ribbon interface with male and female cable ends.
How much cooling space should I retain around modules linked by 6ES7290-6AA20-0XA0?
Provide at least 25 mm clearance above and below the S7-200 devices and at least 75 mm of cabinet depth.
How should I check the power budget before rearranging modules with 6ES7290-6AA20-0XA0?
Add the expansion modules’ 5 V logic-power requirements and keep the total within the selected CPU’s available logic-power budget.
How should I route 6ES7290-6AA20-0XA0 near motor-power wiring?
Keep the low-voltage S7-200 wiring separate from AC power wiring and high-energy, rapidly switched DC wiring.
Can I reconnect 6ES7290-6AA20-0XA0 while the controller remains powered?
Turn off power to the S7-200 and related equipment before installing or removing the expansion connection.