Siemens 6ES7232-4HB30-0XB0 SIMATIC S7-1200 SM 1232 Analog Output Module
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Hot Selling Models
- Recommended Products
Overview
- Match the module to the S7-1200 station and select the intended output mode.
- Use the appropriate minimum voltage-load or maximum current-load impedance.
- Include the external supply and backplane current in the station power budget.
- Provide the required front connector and observe the orientation-dependent ambient limit.
6ES7232-4HB30-0XB0 SIMATIC S7-1200 SM 1232 Analog Output Module
SM 1232 with two analog outputs, fourteen-bit bipolar voltage conversion or thirteen-bit current conversion, and output-circuit diagnostics.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6ES7232-4HB30-0XB0 |
| Product Type | Two-channel analog output module |
| Core Function | Voltage or current command output |
| Application | S7-1200 process and actuator control |
Voltage command signals
Bipolar ten-volt outputs provide fourteen-bit conversion for analog command circuits.
Current-loop command signals
Zero-to-twenty-milliampere outputs provide thirteen-bit conversion for current-operated equipment.
Output diagnostics
Supply monitoring, wire-break and short-circuit diagnostics assist maintenance of the output circuits.
Product Overview
6ES7232-4HB30-0XB0 adds two analog command channels to a SIMATIC S7-1200 station.
Each output function uses the specified voltage or current range, with separate load-impedance requirements and diagnostics for output and supply conditions.
Key Functions
Voltage command signals
Bipolar ten-volt outputs provide fourteen-bit conversion for analog command circuits.
Current-loop command signals
Zero-to-twenty-milliampere outputs provide thirteen-bit conversion for current-operated equipment.
Output diagnostics
Supply monitoring, wire-break and short-circuit diagnostics assist maintenance of the output circuits.
Official Specifications
| Rated supply | 24 V DC |
|---|---|
| Typical supply current | 45 mA |
| Typical backplane current | 80 mA at 5 V DC |
| Typical power loss | 1.5 W |
| Output channels | 2 current or voltage outputs |
| Voltage range and resolution | −10 to +10 V; 14 bits |
| Current range and resolution | 0–20 mA; 13 bits |
| Voltage-mode load impedance | Minimum 1000 Ω |
| Current-mode load impedance | Maximum 600 Ω |
| Basic accuracy at 25°C | ±0.3% of range for voltage and current |
| Accuracy up to 55°C | ±0.6% of total measurement range |
| Common-mode voltage limit | 12 V |
| Diagnostic functions | Supply monitoring, wire break and short circuit; diagnostic alarm |
| Status indication | Output status and maintenance LEDs |
| Front connection | Front connector required |
| Operating ambient | 0 to +55°C horizontal; 0 to +45°C vertical |
| Storage and transport ambient | −40 to +70°C |
| Maximum humidity | 95% at 25°C, non-condensing |
| Enclosure protection | IP20 |
| Dimensions and approximate weight | 45 × 100 × 75 mm (W × H × D); 180 g |
Frequently Asked Questions
Can I drive a five-hundred-ohm current-loop load from 6ES7232-4HB30-0XB0?
The current-output load limit is six hundred ohms, so a five-hundred-ohm load lies within that limit.
Can I connect a five-hundred-ohm load in voltage mode to 6ES7232-4HB30-0XB0?
Voltage operation requires a load impedance of at least one thousand ohms.
Does current mode on 6ES7232-4HB30-0XB0 retain fourteen-bit resolution?
Current output has thirteen-bit resolution, while voltage output has fourteen-bit resolution.
Which bipolar command range can 6ES7232-4HB30-0XB0 generate?
The voltage-output range extends from minus ten to plus ten volts.
What connector must be present to wire the outputs of 6ES7232-4HB30-0XB0?
A front connector is required for the module wiring.
Which output faults can 6ES7232-4HB30-0XB0 report?
The module provides wire-break and short-circuit diagnostics together with supply-voltage monitoring.
Can I use the fifty-five-degree ambient limit when 6ES7232-4HB30-0XB0 is installed vertically?
Vertical installation has a maximum operating ambient temperature of forty-five degrees Celsius.