Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
siemens 6es7193 0cb10 0xa0 et 200b tb2 dc screw terminal block-0

For SIEMENS

Home >  Products >  For SIEMENS

Siemens 6ES7193-0CB10-0XA0 ET 200B TB2/DC Screw Terminal Block

Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months

  • Overview
  • Hot Selling Models
  • Recommended Products
Overview
SIEMENS SIMATIC ET 200B

6ES7193-0CB10-0XA0 ET 200B TB2/DC Screw Terminal Block

A 235 mm wide ET 200B terminal block with three-tier screw terminals and a 24 V DC electronics supply.

At a Glance

Brand Siemens
Model 6ES7193-0CB10-0XA0
Product Type TB2/DC terminal block
Core Function Provides the wired base for digital electronics
Application ET 200B digital I/O electronics blocks

Three-tier wiring

The TB2/DC uses screw terminals for the field connections.

Digital I/O base

A 32-channel base supports the matching ET 200B digital electronics blocks.

Retained field wiring

The terminal block carries the wiring separately from the removable electronics block.

Product Overview

6ES7193-0CB10-0XA0 is the three-tier screw-terminal TB2/DC base for ET 200B digital electronics blocks, with a 235 mm wide housing and a nominal 24 V DC supply.

The block separates the permanently wired terminal section from the electronics assembly and provides electrical isolation between the electronics block and PROFIBUS DP.

Ordering focus: Choose the TB2/DC screw-terminal version and match the digital electronics block, conductor preparation and fuse rating to the installed ET 200B station.
Key Functions

Permanent screw-terminal field wiring

The three-tier connection arrangement keeps sensor and actuator wiring at the terminal base when the electronics block is removed.

Connection base for matching digital electronics

The 32-channel base accommodates the matching ET 200B digital variants, including 32DI, 32DO, 16DO/2A, 16DI/16DO and 24DI/8DO electronics.

Protected local electronics supply

A TR5-T 2.5 A, 250 V miniature fuse protects the local electronics and sensor supply, and the fitted address selector establishes the station’s bus identity.

Official Specifications
Terminal Construction Three-tier screw terminals
Digital Connection Capacity 32-channel base
Nominal DC Supply 24 V DC
Permissible DC Supply Range 18.5–30 V DC, including ripple
Electronics Current Consumption 100 mA typical; 200 mA maximum
Potential Separation Between electronics block and PROFIBUS DP
Unferruled Conductor Cross-section 0.14–2.5 mm²
Ferruled Conductor Cross-section Up to 1.5 mm²
Supply Fuse TR5-T 2.5 A, 250 V
Operating Temperature 0–60 °C
Dimensions (W × H × D) 235 × 130 × 59 mm
Approximate Weight 800 g
Frequently Asked Questions

Can I keep the field wires connected when replacing electronics on 6ES7193-0CB10-0XA0?

The field wiring remains on the terminal block when the electronics block is removed.

Which electronics families can be mounted on 6ES7193-0CB10-0XA0?

The base accepts matching ET 200B 32DI, 32DO, 16DO/2A, 16DI/16DO and 24DI/8DO electronics blocks.

What wire size should I prepare for the screw terminals of 6ES7193-0CB10-0XA0?

Unferruled supply and signal conductors can be 0.14–2.5 mm², while conductors fitted with ferrules are limited to 1.5 mm².

Which fuse is suitable for servicing 6ES7193-0CB10-0XA0?

Use a TR5-T 2.5 A, 250 V miniature fuse, available as spare part 6ES7193-0DB00-0XA0.

Why would a blown fuse on 6ES7193-0CB10-0XA0 stop the electronics block?

An open local fuse removes power from the electronics block.

When does a changed bus address on 6ES7193-0CB10-0XA0 take effect?

A changed station address is adopted after switching the electronics block from STOP to RUN.

Can 6ES7193-0CB10-0XA0 replace a spring-terminal base without changing the wiring method?

The TB2/DC uses screw terminals, so the conductor termination method differs from the TB4/DC spring-terminal base.

Compatibility & Ordering Notes
Before ordering 6ES7193-0CB10-0XA0: Select the three-tier TB2/DC base for the matching digital electronics, with conductor sizes and the local 2.5 A fuse suited to the installation.

Compatibility Checklist for 6ES7193-0CB10-0XA0

  • Match the electronics block to the 32-channel TB2/DC base and its terminal assignment.
  • Provide a 24 V DC supply within the permissible 18.5–30 V range.
  • Use the appropriate signal and supply conductor sizes for screw termination.
  • Set the station address for the installed PROFIBUS master and apply it through STOP/RUN.
  • Use the specified TR5-T 2.5 A, 250 V fuse when replacing the local supply fuse.
Hot Selling Models
NZM7-63N
7000-50021-9610200
1494UHP1
SAKG 40/35 II/GW 063782
KSD1-16 00-105-350 HW:5 SW:5 E93DA552I4B531
3RA2316-8XB30-1AP0
HEE-D-MIDI-24
86003 0100-230/24
PD2T5618X20045
SLS-10-30-PA
VUVG-B18-B52-ZT-F-1R8L
283-907 51160755
26-111
1416402/M12MS/IP20/10
3RV1110-1BA15-1AP0

Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
email goToTop

Evolo Automation is not an authorized distributor unless otherwise specified, representative, or affiliate of the manufacturer of this product. All trademarks and documents are the property of their respective owners and are provided for identification and informational.