Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
siemens 6es7151 3aa00 0ab0 simatic et 200s im151 3 pn interface module-0

For SIEMENS

Home >  Products >  For SIEMENS

Siemens 6ES7151-3AA00-0AB0 SIMATIC ET 200S IM151-3 PN Interface Module

Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months

  • Overview
  • Hot Selling Models
  • Recommended Products
Overview
SIEMENS SIMATIC ET 200S

6ES7151-3AA00-0AB0 SIMATIC ET 200S IM151-3 PN Interface Module

An IM151-3 PN interface with two Ethernet ports, 100 Mbit/s full-duplex transmission and support for up to 63 station modules.

At a Glance

Brand Siemens
Model 6ES7151-3AA00-0AB0
Product Type Distributed-I/O interface module
Core Function Linking an I/O station to its controller
Application ET 200S PROFINET IO stations

Connect distributed I/O over Ethernet

The interface uses 100BASE-TX with two RJ45 ports and autonegotiation.

Build a modular ET 200S station

Up to 63 power, electronic or motor-starter modules can be connected within a 2 m station width.

Identify supply and communication faults

LINK, BF, SF and ON indicators support local checks of the station and network.

Product Overview

6ES7151-3AA00-0AB0 connects ET 200S power, electronic and motor-starter modules to a PROFINET IO controller.

The station can contain up to 63 modules across a maximum width of 2 m, with LED diagnostics and a terminating module included in the interface-module scope.

Ordering focus: Match the original IM151-3 PN generation, its MMC requirement and the supported STEP 7 configuration.
Key Functions

Connect distributed I/O over Ethernet

The interface uses 100BASE-TX with two RJ45 ports and autonegotiation.

Build a modular ET 200S station

Up to 63 power, electronic or motor-starter modules can be connected within a 2 m station width.

Identify supply and communication faults

LINK, BF, SF and ON indicators support local checks of the station and network.

Official Specifications
Transmission Method 100BASE-TX
Maximum Transmission Rate 100 Mbit/s, full duplex
Ethernet Connections 2 RJ45 ports with autonegotiation
Maximum Station Expansion 63 power, electronic or motor-starter modules; up to 2 m width
Input and Output Address Space 256 bytes of inputs and 256 bytes of outputs
Maximum Supply Current from 1L+ 200 mA
Typical Power Loss 2 W
Supply-Failure Bridging Time 20 ms
Network Services SNMP, ping and ARP
Diagnostic Indicators LINK, BF (red), SF (red) and ON (green)
Electrical Isolation Ethernet isolated from electronics
Isolation Test Voltage 500 V DC
Dimensions (W × H × D) 45 × 119.5 × 75 mm
Approximate Weight 135 g
Frequently Asked Questions

Does 6ES7151-3AA00-0AB0 need an MMC for operation?

A Micro Memory Card is required for this interface generation.

Which STEP 7 release can configure 6ES7151-3AA00-0AB0?

Use STEP 7 V5.3 with Service Pack 1 or later and the supplied GSD file.

How many station modules can I connect to 6ES7151-3AA00-0AB0?

The interface supports up to 63 power, electronic or motor-starter modules within a maximum station width of 2 m.

Do I need to assign a device name before commissioning 6ES7151-3AA00-0AB0?

The IO device must be assigned a device name before PROFINET IO commissioning.

What controller state is required when commissioning 6ES7151-3AA00-0AB0?

The IO controller must be powered and in RUN before the ET 200S station is commissioned.

Which local indicators help diagnose 6ES7151-3AA00-0AB0?

The module provides LINK, bus-fault BF, group-error SF and supply ON indicators.

Is a terminating module included with 6ES7151-3AA00-0AB0?

The interface-module scope includes the terminating module.

Compatibility & Ordering Notes
Before ordering 6ES7151-3AA00-0AB0: Match the original IM151-3 PN generation, its MMC requirement and the supported STEP 7 configuration.

Compatibility Checklist for 6ES7151-3AA00-0AB0

  • Provide the required Micro Memory Card for this original interface generation.
  • Configure with STEP 7 V5.3 SP1 or later and the applicable GSD file.
  • Assign the PROFINET device name before startup.
  • Keep the ET 200S station within 63 modules and 2 m total width.
  • Include the terminating module and the installed power-module arrangement.
Hot Selling Models
KDC12K08POLK
KL1500009 219929
X20DO2322
6FX1118-4AA01
BW1219 12345
6ED1052-1MD00-0BA4
3RV2021-0HA20
XK89PB8
CML1-159-30
3RT1045-1AP00
6ES7648-2BF01-0XC0
4-MT P/P 3070302
QUINT-PS-100-240AC/24DC/2.5
WTE11-2P2432
EX9-PE1-X23

Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
email goToTop

Evolo Automation is not an authorized distributor unless otherwise specified, representative, or affiliate of the manufacturer of this product. All trademarks and documents are the property of their respective owners and are provided for identification and informational.