Siemens SITOP PSU300S 6EP1437-2BA20 24 V/40 A Supples Alimentationis

Conspectus

SIEMENS SITOP PSU300S • three-phase power supply

6EP1437-2BA20 SITOP PSU300S 24 V/40 A power supply

A regulated 24 V DC, 40 A supply for three-phase industrial power networks.

Ad Primum Aspectum

Nota	Siemens
Modellum	6EP1437-2BA20
Typus Producti	Regulated power supply
Functio principalis	Three-phase AC to 24 V DC conversion
Series Productorum	SITOP PSU300S

40 A output

Provides 24 V DC at a rated 40 A for control-system loads.

Tensio regolabilis

The DC output can be set from 24 to 28 V using the front potentiometer.

Vim supplementariam

Supplies up to 60 A for 5 seconds per minute to support brief load peaks.

Product Overview

6EP1437-2BA20 is the 40 A variant of the SITOP PSU300S regulated industrial power supply. It converts a three-phase 400–500 V AC nominal input to an isolated 24 V DC output.

The device has a 24 V OK status LED and signaling contact, plus short-circuit-proof and no-load-proof output behavior. It mounts on a TH35-15 DIN rail and may be integrated with suitable SITOP supplementary modules.

Focus ordinandi: verify the available three-phase input, 40 A load budget, rail space and the 24 V OK monitoring circuit.

Key Functions

Industriales suppetiae directae currentis

Provides regulated, isolated 24 V DC power for automation loads.

Peak Load Support

Delivers 150% rated output for brief periods of up to 5 seconds per minute.

Supply Monitoring

Reports the 24 V OK state through an LED and a signaling contact.

Official Specifications

Tensio Input Nominale	3-phase AC 400–500 V
Intervallo ingressus permissum	3-phase AC 340–550 V
Frequentia nominalis lineae	50/60 HZ
Maxima Currus Inrumpens	60 A
Rated Output intentione	24 V DC
Adūstātiō Voltāgis Exīsūs	24–28 V CC
Currentis Output Aestimatus	40 A
Potentia Output Notata	960 W
Brief Extra Power	60 A for 5 s/min
Maximum Mains Buffering Time	At least 6 ms
Efficientia typica	91.5%
Typical No-Load Loss	5 w
Typical Power Loss at Rated Load	89 W
Typicalis limitatio currentis	50 A
Typical Start-Up Time	Usque ad 1.5 s
Tempus ascensus typicum exirendi	15 milliseconda
Latus × altitudo × profunditas	145 × 145 × 150 mm
Pondus Approximatum	3.1 KG
Rail de montage	TH35-15 DIN-rail

Fons officialis: Manuale Siemens SITOP PSU300S .

Quaestiones Frequenter Rogatae

Quae suppletio intrans requiritur ab 6EP1437-2BA20?

Utere suppletione AC triphasiaca cum voltatione nominali inter 400 et 500 V.

Quam multum currentis DC 6EP1437-2BA20 continuo praebere potest?

Praebitio nominata est 40 A ad 24 V DC.

Num praebitio 6EP1437-2BA20 reguari potest?

Potentiometer frontalis praebitionem inter 24 et 28 V DC statuit.

Can 6EP1437-2BA20 support a short current peak?

It can provide 60 A for up to 5 seconds per minute.

How can I monitor the output status of 6EP1437-2BA20?

A front LED and a 24 V OK signaling contact indicate output status.

What rail is needed to mount 6EP1437-2BA20?

Mount the supply on a TH35-15 DIN rail.

Is the output of 6EP1437-2BA20 isolated?

The regulated DC output is isolated from the three-phase input.

Compatibility & Ordering Notes

Before ordering 6EP1437-2BA20: confirm the input network, load current, mounting space and monitoring-contact rating.

SITOP supply checklist

• Allow the specified clearance above and below the supply for convection cooling.
• Confirm that the 24 V loads remain within the rated 40 A continuous output.
• Set the output voltage and wire the 24 V OK contact according to the equipment manual.

Hot Selling Models