Siemens SIMATIC ET 200SP HA 6DL1134-6UD00-0PK0 AI 4xI 2-/4-wire HART ISOL HA Analog Input Module

Conspectus

SIEMENS SIMATIC ET 200SP HA • ISOLATED HART ANALOG INPUT

6DL1134-6UD00-0PK0 AI 4xI 2-/4-wire HART ISOL HA Analog Input Module

A four-channel, channel-isolated current input module for ET 200SP HA stations with HART support and 2-wire or 4-wire transmitters.

Ad Primum Aspectum

Nota	Siemens
Modellum	6DL1134-6UD00-0PK0
Typus Producti	Modulus Ingressus Analogicus
Functio principalis	Isolated current acquisition with HART
Series Compatible	SIMATIC ET 200SP HA

Four Current Inputs

Connects up to four analog current signals from 2-wire or 4-wire transmitters.

Isolatio Canalium

The four inputs are electrically isolated from one another and from the backplane and supply.

HART Integration

Supports standard, HART and MultiHART input address formats for device data.

Product Overview

6DL1134-6UD00-0PK0 est le module SIMATIC ET 200SP HA AI 4xI 2-/4-fil HART ISOL HA. Il lit quatre signaux de courant, prend en charge la communication HART et fournit des canaux isolés pour les instruments de processus.

Le module prend en charge les plages 0–20 mA et 4–20 mA et utilise des borniers de type K0 ou L0. Siemens spécifie L0 pour une disposition redondante de modules ; vérifiez la conception de la station et le type de bornier avant commande.

Focus ordinandi: confirmez le suffixe exact 6UD00-0PK0, les exigences HART, le type de bornier, le câblage du transmetteur et le plan de redondance de la station.

Key Functions

Acquisition de courant de processus

Convertit quatre signaux de transmetteur 0–20 mA ou 4–20 mA pour la station ET 200SP HA.

Alimentatio Transmitteris

Fournit quatre sorties électroniquement protégées de tension d’alimentation capteur 24 V pour les dispositifs connectés.

Accès aux données HART

Prend en charge l’ingénierie compatible HART avec les options standard, HART et MultiHART pour l’espace d’adresses.

Official Specifications

Canali Analogici Input	4
Intervala Mensurae Currentis	0–20 mA; 4–20 mA
Resolutio	16 bit inclusu signo
Resistentia input	250 Ω
Limite de destruction du courant d’entrée	24 mA
Tensio nominalis supplicii	24 V DC
AMPLITUDO ADMISSIBILIS FONDIS	19,2–28,8 V CC
Exitus Alimentationis Sensorum	4, protégé électroniquement contre les courts-circuits
Tension nominale d’alimentation capteur	24 V DC
Maximum Sensor Supply Current	23.5 mA per channel; 88 mA per module
Spatium Adressarum Input	9 bytes standard; 29 bytes HART; 16 bytes MultiHART
Typus Blockus Terminalis	K0 or L0; L0 for redundancy
Maxima Longitudo Cavi Scutati	800 m
Isolatio Electrica	125 V AC / 150 V DC between channels, backplane and supply
Basic Error Limit	±0.1%
Temperatura operativa	−40 to +70 °C, subject to derating
Dimensiones (L × H × D)	22.5 × 115 × 138 mm
Pondus Approximatum	163 g

Fons officialis: Siemens ET 200SP HA AI 4xI HART ISOL equipment manual .

Quaestiones Frequenter Rogatae

Can 6DL1134-6UD00-0PK0 connect both 2-wire and 4-wire transmitters?

Yes. The module is designated for 2-wire and 4-wire current transmitters; use the documented terminal assignments for the selected wiring.

Which current ranges are available on 6DL1134-6UD00-0PK0?

The channel measuring ranges include 0–20 mA and 4–20 mA.

Which terminal block should I specify for a redundant pair?

Siemens specifies terminal block type L0 for a redundant module arrangement; K0 is also listed for nonredundant use.

Does this module supply connected transmitters?

It provides four 24 V sensor supply outputs with electronic short-circuit protection. Check each channel and total module current limits.

How much input address space should I reserve for HART?

The manual lists 9 bytes for standard mode, 29 bytes for HART mode and 16 bytes for MultiHART mode.

Are the four measurement channels electrically isolated?

Yes. Siemens specifies isolation between channels and toward the backplane and supply.

Can I use this module in a −40 °C cabinet?

The specified operating range starts at −40 °C. Check the manual’s temperature-dependent derating and the complete station configuration.

Compatibility & Ordering Notes

Before ordering 6DL1134-6UD00-0PK0: verify sensor wiring, terminal block K0/L0, controller address configuration, environmental limits and the full ET 200SP HA station bill of materials.

ET 200SP HA integration checklist

• Choose the matching K0 or L0 terminal block; use L0 for redundancy.
• Set each channel to the correct current range and HART operating mode.
• Check sensor supply current and temperature derating for the assembled station.

Hot Selling Models