Accipe Aestimationem Gratuitam

Legatus noster te mox contactabit.
Epistula electronica
Nomen
Nomen societatis
Nuntius
0/1000

Pro SIEMENS

Pagina prima>Producta>Pro SIEMENS

Siemens SINAMICS A5E00468282 Adaptātor Stīvae Potentiae PSA2

Fabricator: Siemens
Condición: Nuevo
Plazo de Entrega: En Stock
Origo: Germania
Garantía: 12 Meses

Inscriptio electronica: [email protected]

whatsapp: +86-18150117685

  • Conspectus
  • Product Overview
  • Key Functions
  • Official Specifications
  • Quaestiones Frequenter Rogatae
  • Compatibility & Ordering Notes
  • Hot Selling Models
  • Producta commendata
Conspectus

Siemens SINAMICS · Power Stack Adapter

A5E00468282 Power Stack Adapter PSA2

Power-stack interface adapter prepared for SINAMICS GM150 and SM150 converter safety arrangements using the user-specified Siemens reference 6SL3995-6AX00-0BA0.

Ad Primum Aspectum

Nota Siemens
Modellum A5E00468282
Typus Producti Power Stack Adapter PSA2
Functio principalis Interfaces the converter control and power-stack safety signal path
Series Compatible SINAMICS GM150 and SM150 converter cabinets

Identificatio exacta.

Match A5E00468282 and the PSA2 reference order number before replacing the installed adapter.

Safety Interface

Preserve both independent low-active switch-off paths used by the installed converter safety circuit.

Converter Check

Confirm the SINAMICS cabinet type, option K80 arrangement and external safety-device wiring.

Product Overview

A5E00468282 is listed here as a Siemens SINAMICS Power Stack Adapter PSA2 using the technical parameter basis requested for 6SL3995-6AX00-0BA0.

Within SINAMICS GM150 and SM150 converter cabinets, the Power Stack Adapter participates in the Safe Torque Off signal chain and uses two independent failsafe low-active switch-off paths.

Focus ordinandi: match A5E00468282 with reference 6SL3995-6AX00-0BA0, then confirm the converter MLFB, serial number, cabinet option K80 and safety-channel connector arrangement.
Key Functions

Power-Stack Signal Interface

The adapter connects the converter-control safety path to the power stack within the approved SINAMICS cabinet arrangement.

Dual Failsafe Switch-Off Paths

Two independent low-active channels are used so a wire break or component failure drives the safety circuit toward the safe state.

Safe Torque Off Preparation

Cum SIRIUS 3SK1 securitatis relais, adapter praeparat optionem K80 STO ad consummationem per externum emergentiae-stop dispositivum aut securitatis PLC.

Official Specifications
Numerus Ordinis Referentiae 6SL3995-6AX00-0BA0
Contextus Functionis Securitatis Secura Torque Off cum optione K80
Architectura Interruptoris Duae independens vias signali secures
Logica Interruptoris Activa infima in utrisque viis securitatis
Categoria Securitatis ISO Categoria 3
Gradus operationis PL e
Nivelis Integritātis Securitātis SIL 3
Functional-Safety Standard EN ISO 13849-1:2015
Electrical-Safety Standard IEC 61508-5-1:2010
Unexpected-Start Standard EN 60204-1:2006/A1:2009, Sectio 5.4
Companion Safety Relay SIRIUS 3SK1
Torque-Energy Response Safety-related pulse cancellation interrupts torque-producing energy
Motor Electrical Isolation Motor Module and motor remain electrically connected
K80 Altitude Threshold Project-specific inquiry required above 2000 m
Quaestiones Frequenter Rogatae

Can A5E00468282 be used in the STO circuit of a SINAMICS GM150 or SM150 converter?

Yes, the adapter forms part of the option K80 safety arrangement when combined with the specified safety relay and external safety device.

Which safety ratings apply to an A5E00468282 installation?

The relevant arrangement is certified to Category 3, Performance Level e and Safety Integrity Level 3.

Does A5E00468282 electrically isolate the motor when Safe Torque Off is active?

No, Safe Torque Off interrupts torque-producing energy without galvanically disconnecting the Motor Module from the motor.

How should the safety channels of A5E00468282 be wired?

Keep the two switch-off paths independent and low-active so an interrupted wire or failed component drives the system to the safe state.

Which external device completes the A5E00468282 safety function?

Use the approved SIRIUS 3SK1 relay with a suitable emergency-stop device or safety PLC for the configured machine circuit.

Can A5E00468282 be installed above 2000 metres?

An installation above 2000 m requires a project-specific Siemens inquiry before option K80 is applied.

What should be checked before replacing A5E00468282?

Match the adapter reference, converter MLFB and serial number, cabinet option, connector assignment and both safety-channel circuits before energizing the drive.

Compatibility & Ordering Notes
Ante ordinandum A5E00468282: conferre numerum A5E integrum et referentiam 6SL3995-6AX00-0BA0, atque praebere MLFB converteris, numerum seriatum, et particularia circuitus optionis K80.

Index Compatibilitatis

  • Confirmare converterem installatum ad configurationem armariorum SINAMICS GM150 vel SM150 pertinentem.
  • Servare independentiam et comportamentum activitatis infimae utriusque viae interrumpendi tutelares.
  • Verificare relais SIRIUS 3SK1 et circuitum externum emergentis arrestus vel PLC tutelaris antequam in operationem ducatur.
  • Disponere examen speciale pro projecto antequam optio K80 adhibeatur supra altitudinem installationis 2000 m.
Hot Selling Models
VAM40V1/0R1/8EN
3842 542 555
VMPA1-DP 533359
631.153.000.923.000 50086390
GV2-M06
ABB S202
5-HF 12DC-ST
SAC-5P-MINMS/0.6-441/MINFS
8340-GIII-NIF4-A4HIII
3VU1300-1MD00
7999-88001-2330150
7000-12261-6331000
1.5-24/5 85 657
PT78704
VQC1101N-51

Accipe Aestimationem Gratuitam

Legatus noster te mox contactabit.
Epistula electronica
Nomen
Nomen societatis
Nuntius
0/1000
epistula electronica ad Summum ire

Evolo Automation non est distributor autorizatus nisi aliter specificatum, nec representans, nec affinis fabricantis huius producti. Omnia signa propria et documenta sunt proprietatis suorum dominorum respective et data sunt ad identificationem et informationem.