Accipe Aestimationem Gratuitam

Legatus noster te mox contactabit.
Epistula electronica
Nomen
Nomen societatis
Nuntius
0/1000

Pro SIEMENS

Pagina prima>Producta>Pro SIEMENS

Siemens 6SE6400-0BE00-0AA0 MICROMASTER 430 BOP-2 Basic Operator Panel

Fabricator: Siemens
Condición: Nuevo
Plazo de Entrega: En Stock
Origo: Germania
Garantía: 12 Meses

Inscriptio electronica: [email protected]

whatsapp: +86-18150117685

  • Conspectus
  • Hot Selling Models
  • Producta commendata
Conspectus
SIEMENS MICROMASTER 430

6SE6400-0BE00-0AA0 MICROMASTER 430 BOP-2 Basic Operator Panel

A BOP-2 panel with a five-digit LCD for parameter adjustment, drive status and local Hand/Auto operation.

Ad Primum Aspectum

Nota Siemens
Modellum 6SE6400-0BE00-0AA0
Typus Producti Removable local operator panel
Functio principalis Editing drive parameters and issuing local commands
Applicatio MICROMASTER 430 inverters

Five-digit readout

The seven-segment LCD displays parameters, actual values, setpoints, and faults.

Local control selection

Motor control from the panel requires the appropriate command and setpoint parameters.

No parameter cloning

The panel cannot store complete parameter sets for transfer.

Product Overview

6SE6400-0BE00-0AA0 is the BOP-2 Basic Operator Panel for MICROMASTER 430 inverters. It replaces the status display panel when local parameter access and a numeric readout are required.

The panel supports local motor commands after configuration and includes Hand/Auto selection for the drive command-data sets. It is not a parameter-backup device, and removing it stops the drive when the panel is selected as the command source.

Focus ordinandi: Use the BOP-2 assigned to MICROMASTER 430 and review the command source before removing or replacing the panel.
Key Functions

Adjust drive parameters

The panel permits editing drive parameters and displays the selected number and value.

Monstrare informationes operationales

LCD quinque-digitus ostendit valores praefinitos, valores reales, nuntia alarum et nuntia defectuum.

Elige comportamentum operativum localem

Praecepta configurata tabulae et selectio Manu/Auto suadent operationem localem MICROMASTER 430.

Official Specifications
Display LCD quinque-digitus, septem-segmentorum pro parametris, valoribus et nuntiis alarum/defectuum
Storagium parametrorum Nulla integra conservatio copiae parametrorum in BOP-2
Clavis Octo pulsatores: ON, OFF, Manu, Auto, Fn, P, Augere et Minuere
Responsio pulsatoris Stop OFF1: arrestus cum decremento graduali ubi P0700 = 1; OFF2: arrestus per inertiā post duplicem pressionem aut unam pressionem longam, semper activus
Selectio datarum praecipui Manu/Auto Switching between CDS 1 and CDS 2; inactive while CDS 3 is selected through P0811
Operating-data quick view Fn hold time: 2 s; DC-link voltage, output current, output frequency, output voltage and the P0005-selected value, with duplicate values omitted
Digit-by-digit value editing Fn selects individual digits; Increase and Decrease adjust the selected digit; P exits the value-editing level
Attachment and removal under power Permitted while inverter power is applied; removal stops the drive when the panel is the I/O command source (P0700 = 1)
Quaestiones Frequenter Rogatae

Can I use 6SE6400-0BE00-0AA0 to copy a complete parameter set to another drive?

Panellus non potest salvare integros parametrorum ordines.

Cur motoris regulandi butones in 6SE6400-0BE00-0AA0 non operantur cum praescriptis fabricae?

Regulatio motoris per panellum ex default est inactiva et requirit P0700 = 1 et P1000 = 1.

Num removendo 6SE6400-0BE00-0AA0 arreptus iam currenter cursus interrumpetur?

Arreptus interrumpitur si panellus removatur dum P0700 = 1 eum ut originem imperiorum eligit.

Num 6SE6400-0BE00-0AA0 aptari potest dum vis electrica ad inversorem adhuc applicatur?

BOP-2 aptari aut removi potest dum vis electrica ad inversorem applicatur.

Cur buto Manu/Automatice in 6SE6400-0BE00-0AA0 inactivum fit cum tertio imperiorum et datorum ordine?

Hoc buto alternat inter primum et secundum imperiorum et datorum ordines, atque inactivum est dum tertius ordo electus est.

Quae positio impedit imperium cursus post celerem commissionem per 6SE6400-0BE00-0AA0?

P0010 must return to 0 before the drive can run.

Can I replace 6SE6400-0BE00-0AA0 with a standard MICROMASTER BOP or AOP?

MICROMASTER 430 uses the BOP-2 and cannot be operated with the BOP or AOP.

Compatibility & Ordering Notes
Before ordering 6SE6400-0BE00-0AA0: Use the MICROMASTER 430 BOP-2 version and account for the selected command source before replacing the panel.

Compatibility Checklist for 6SE6400-0BE00-0AA0

  • Select BOP-2 for MICROMASTER 430.
  • Use P0700 = 1 and P1000 = 1 when panel motor commands are required.
  • Return P0010 to 0 after quick commissioning.
  • Preserve a separate parameter backup because the panel cannot store a complete parameter set.
Hot Selling Models
Allen-Bradley 700DC-F400Z24
280-549 280549 280 549 51245292
50037324
3TH4253-0BB4
4000-68122-0410010
21HF6K0B250
XCKJ10511D
1LS56-4PGN149
PMC100E-1
T0914-16-048 106146-002
ALFAB500BPB
GV2-P21 17-23A
635-028
FR-2N DD2105
SR2B201B

Accipe Aestimationem Gratuitam

Legatus noster te mox contactabit.
Epistula electronica
Nomen
Nomen societatis
Nuntius
0/1000
epistula electronica ad Summum ire

Evolo Automation non est distributor autorizatus nisi aliter specificatum, nec representans, nec affinis fabricantis huius producti. Omnia signa propria et documenta sunt proprietatis suorum dominorum respective et data sunt ad identificationem et informationem.