Siemens 6GT2002-1HD00 SIMATIC RF170C Lectōris Coniūnctiōnis Cāsula
Fabricator: Siemens
Condición: Nuevo
Plazo de Entrega: En Stock
Origo: Germania
Garantía: 12 Meses
Inscriptio electronica: [email protected]
whatsapp: +86-18150117685
- Conspectus
- Hot Selling Models
- Producta commendata
Conspectus
- Utere electronicis RF170C congruentibus et coniunctione stationis ET 200pro.
- Select reader cables with the correct 8-pin M12 pin assignment.
- Tighten the four front mounting screws and M12 connector fastenings to 1.5 Nm.
- Close every unused M12 socket with a sealing cap.
- Apply the reader-dependent RS-422 or RS-232 cable limit.
- Isolate the supply or remove the connection module before wiring.
6GT2002-1HD00 SIMATIC RF170C Reader Connection Block
An RF170C connection block with two 8-pin M12 reader sockets, mounted on the separate RF170C communication module.
Ad Primum Aspectum
| Nota | Siemens |
|---|---|
| Modellum | 6GT2002-1HD00 |
| Typus Producti | Reader connection block for the RF170C communication module |
| Functio principalis | Connects reader cables to the RF170C electronics module |
| Applicatio | ET 200pro distributed RFID and identification stations |
Reader cable connections
Two M12 sockets, X1 and X2, accept reader connecting cables.
Separate connection block
The block mounts on the RF170C communication module and is ordered separately.
Instalatio in campo hermetice clausa
Forniculae M12 non usae capsulis hermeticis obstruendae sunt, ut gradus protectionis aggregationis servetur.
Product Overview
6GT2002-1HD00 est blocus connexionis lectoris pro statione identificationis RF170C in systemate SIMATIC ET 200pro.
Blocus in electronicis communicationis montatur et duas forniculas rotundas M12 octopinatas pro cavis lectorum praebet; est res separatim ordinanda a modulo communicationis RF170C.
Key Functions
Terminatio cavum lectorum
Forniculae X1 et X2 puncta connexionis pro duobus cavis lectorum per connectores M12 octopinatos praebent.
Aggregatio modularis stationis
Blocus connexionis in modulum communicationis RF170C inseritur et per quattuor scruas anteriores ad rastrum firmatur.
Connexiones in campo protectae
Sigillare le prese rotonde non utilizzate con tappi M12 preserva la protezione specificata IP65, IP66 o IP67 dell'insieme installato.
Official Specifications
| Disposizione delle prese del lettore | Due prese, X1 e X2 |
|---|---|
| Tipo di connettore del lettore | prese rotonde a 8 pin M12 |
| Dimensioni del blocco di collegamento (L × A × P) | 90 × 130 × 60 mm |
| Peso approssimativo del blocco di collegamento | 500 g |
| Viti di fissaggio | Quattro viti a croce anteriori |
| Torque de serrage de la vis de fixation et du connecteur M12 | 1,5 Nm pour chaque vis ou connecteur cranté spécifié |
| Câble de lecteur auto-assemblé | Câble cuivre souple blindé à 7 conducteurs ; section des conducteurs ≤ 0,75 mm² |
| Limite de câble RF170C RS-422 | 50 m pour toutes les configurations de lecteur ; jusqu’à 1 000 m selon le lecteur et sa consommation électrique |
| Limite de câble RF170C RS-232 | 30 m ; réduite à 5 m lorsque le lecteur utilise l’alimentation 5 V du RF170C |
| Température ambiante de fonctionnement de l’ensemble RF170C | −25 ad +55 °C |
| Température de stockage et de transport de l’ensemble RF170C | −40 usque ad +70 °C |
| Installed assembly protection | IP67; unused M12 sockets must be closed with sealing caps |
Quaestiones Frequenter Rogatae
Is 6GT2002-1HD00 the RF170C electronics module or the reader connection block?
This order number identifies the connection block, which is supplied separately from the RF170C communication electronics.
Which reader connectors are provided by 6GT2002-1HD00?
The connection block provides two 8-pin M12 sockets designated X1 and X2.
How is 6GT2002-1HD00 secured after plugging it into the communication module?
Secure the block to the rack with its four front cross-head screws tightened to 1.5 Nm.
What should be done with an unused reader socket on 6GT2002-1HD00?
Claude socketum inusitatum cum capsula sigillandi M12 ut gradus protectionis coniunctionis installatae servetur.
Quae constructio cavi permittitur ad faciendum ductum lectoris pro 6GT2002-1HD00?
Utere caulo flexibili scutato septem-conductorum ex cupro, cuius conductores non sunt maiores quam 0.75 mm², et coniunctione M12 octo-pinis congruente.
Num lector per 6GT2002-1HD00 connectus semper potest usum facere maximae longitudinis cavi RS-232?
Generalis limitatio RS-232 est 30 m, sed cadit ad 5 m cum lector alitur ab output 5 V RF170C.
Num 6GT2002-1HD00 potest connexum esse dum suppletur energia?
Extingue tensionem supplitii aut remove modulum connexionis antequam incipias opus connexorum.