EN
Siemens SCALANCE X101-1LD Unmanaged Industrial Ethernet Media Converter 6GK5101-1BC00-2AA3
Fabricator: Siemens
Condición: Nuevo
Plazo de Entrega: En Stock
Origo: Germania
Garantía: 12 Meses
Inscriptio electronica: [email protected]
whatsapp: +86-18150117685
- Conspectus
- Product Overview
- Key Functions
- Official Specifications
- Quaestiones Frequenter Rogatae
- Compatibility & Ordering Notes
- Hot Selling Models
- Producta commendata
Conspectus
Siemens • SCALANCE X-100
6GK5101-1BC00-2AA3 SCALANCE X101-1LD Unmanaged Industrial Ethernet Media Converter
The SCALANCE X101-1LD is an unmanaged Industrial Ethernet media converter with one RJ45 port, one 100 Mbit/s singlemode ST/BFOC optical port, redundant 24 V DC supply and fault signaling.
Ad Primum Aspectum
| Nota | Siemens |
|---|---|
| Modellum | 6GK5101-1BC00-2AA3 |
| Typus Producti | Unmanaged copper-to-singlemode fiber media converter |
| Functio principalis | Converts one 10/100 Mbit/s RJ45 Industrial Ethernet link to one 100 Mbit/s singlemode optical link |
| Applicatio vel series compatibiles | PROFINET-compliant machine networks requiring long-distance singlemode fiber with ST/BFOC termination |
Identificatio exacta.
Match 6GK5101-1BC00-2AA3 character by character and confirm the complete SCALANCE X101-1LD Unmanaged Industrial Ethernet Media Converter designation.
Arrangementum Interfacis
Confirmare ante connexionem substitutionis supplitum installatum, portus, connexiones campestres et accessoria requisa.
Configuration Check
Servare projectum ingenieriae approbatum, parametres rete et data applicationis quae systema installatum utitur.
Product Overview
The SCALANCE X101-1LD is an unmanaged Industrial Ethernet media converter with one RJ45 port, one 100 Mbit/s singlemode ST/BFOC optical port, redundant 24 V DC supply and fault signaling.
One RJ45 port connects to one long-distance singlemode optical interface. Separate supply inputs support redundant 24 V DC operation with input fusing. LED indication and a signaling contact provide immediate status information at the machine.
Key Functions
Copper-to-Fiber Conversion
One RJ45 port connects to one long-distance singlemode optical interface.
Redundant Industrial Power
Separate supply inputs support redundant 24 V DC operation with input fusing.
Local Fault Diagnostics
LED indication and a signaling contact provide immediate status information at the machine.
Official Specifications
| Typus Producti | SCALANCE X101-1LD |
|---|---|
| Transfer Rate | 100 Mbit/s |
| Portus Rete Cupri | 1 x RJ45, 10/100 Mbit/s |
| Portus optici | 1 x ST/BFOC, 100 Mbit/s singlemode |
| Maximum Optical Range | 0 to 26 km |
| Minimum Transmitter Output | -5 dB relative to 1 mW |
| Minimum Receiver Sensitivity | -35 dB relative to 1 mW |
| Tensio nominalis supplicii | 24 V DC |
| AMPLITUDO ADMISSIBILIS FONDIS | 18 ad 32 V DC |
| Maxima Consumptio Electrica | 0.12 A |
| Pertusa Potentiae ad 24 V | 3 W |
| Signaling contact rating | 24 V DC, maxime 0.1 A |
| Temperatura operativa | -10 to 60 °C |
| Maximum Relative Humidity | 95% ad 25 °C, non condensans |
| Gradus praesidium | IP30 |
| Dimensiones | 40 x 125 x 124 mm |
| Ponderis netum | 0,55 kg |
| Optiones montandi | 35 mm DIN-rail, S7-300 rail aut mur |
Quaestiones Frequenter Rogatae
Which fiber interface is fitted to 6GK5101-1BC00-2AA3?
Use the singlemode 100 Mbit/s ST/BFOC optical port with a link budget suitable for the installed route.
Can 6GK5101-1BC00-2AA3 accept redundant power?
Yes; wire the separate 24 V DC supply inputs within the 18 to 32 V permitted range.
What copper connection is available on 6GK5101-1BC00-2AA3?
The converter provides one 10/100 Mbit/s RJ45 port for the electrical network segment.
How far can the optical link run from 6GK5101-1BC00-2AA3?
The published maximum is 26 km, but the actual design must satisfy the fiber and connector attenuation budget.
Does 6GK5101-1BC00-2AA3 require network configuration?
No; it is unmanaged, but link speed, cabling, fault contact and topology still require verification.
Where can 6GK5101-1BC00-2AA3 be mounted?
Install it on a 35 mm DIN rail, S7-300 rail or wall while preserving ventilation and IP30 enclosure protection.
What should be tested after installing 6GK5101-1BC00-2AA3?
Verify both power feeds, copper and optical link LEDs, attenuation margin, fault contact and end-to-end traffic.
Compatibility & Ordering Notes
Index Compatibilitatis
- Use singlemode fiber and ST/BFOC connectors with a valid link budget.
- Provide enclosure protection appropriate for an IP30 device.
- Verify both redundant power inputs and the signaling contact.
