EN
Siemens 6ES7550-1AA00-0AB0 SIMATIC S7-1500 TM Count 2x24V Technology Module
Fabricator: Siemens
Condición: Nuevo
Plazo de Entrega: En Stock
Origo: Germania
Garantía: 12 Meses
Inscriptio electronica: [email protected]
whatsapp: +86-18150117685
- Conspectus
- Hot Selling Models
- Producta commendata
Conspectus
- Serva separationem inter vias 24 V encoderis et interfaces 5 V RS422 aut SSI.
- Applica limitem longitudinis cavi encoderis dependentem a frequentia, ut 50 m ad 200 kHz.
- Praebe alimentum encoderis commune pro utrisque canalibus simul.
- Distribue areas adressionis per canalem pro modo operationis technologico electo.
siemens SIMATIC S7-1500
6ES7550-1AA00-0AB0 SIMATIC S7-1500 TM Count 2x24V Technology Module
Two-channel technology module for 24 V incremental encoders and pulse sensors, with counter comparison functions, digital gating and motion-control position acquisition.
Ad Primum Aspectum
| Nota | Siemens |
|---|---|
| Modellum | 6ES7550-1AA00-0AB0 |
| Typus Producti | TM Count 2x24V technology module |
| Functio principalis | High-speed counting and position measurement |
| Applicatio | S7-1500 et systemata automationis ET 200MP |
Duo canales contrarios
Acquirere signa pulsuum et encoderum incrementorum independenter.
Signa controlis localis
Tres introitus digitales et duo effluvia digitalia disponibilia sunt per canalem.
Acquisitio positionis
Integrare valores positionis incrementorum in S7-1500 Motion Control.
Product Overview
6ES7550-1AA00-0AB0 praebet duos canales contrarios 24 V pro numeratione pulsuum, mensura frequentiae et acquisitu positionis incrementorum in stazione SIMATIC S7-1500 aut ET 200MP.
Hoc modulus accipit signa encoderis fontis vel sink, includit introitus digitales pro functionibus portae, capturae et synchronisationis, et potest commutare effluvia ex valoribus comparationis.
Key Functions
Numeratio encoderis
Tractus incrementales A/B, tractus zero et encoderes impulsum suadentur, cum maxima frequentia intrantis 200 kHz et numeratione 800 kHz per evaluationem quadruplam.
Controllo portae et comparationis
Portae hardware et software, captio, synchronizatio et duo comparatoria per canallem coordinant numerationem cum processu machinae.
Mensura et controllo motus
Modulus frequentionem et durationem cycli metitur et acquisitionem positionis incrementalis pro S7-1500 Motion Control subministrat.
Official Specifications
| Canalia Numerandi | 2 |
|---|---|
| Maxima frequentia intrantis encoderis | 200 kHz |
| Maxima Frequēntia Numerāndī | 800 kHz per evaluationem quadruplam |
| Nivel semnal encoder | 24 V; intrantes fontis vel foveae |
| Ingressus Controlis Digitalis | 6 totaliter; 3 per canal |
| Emissiones Digitales | 4 exire transistorum; 2 per canallem |
| Currentis Output Aestimatus | 0.5 A per output; 2 A maximum per module |
| Comparators | 2 per channel |
| Load supply voltage | 24 V CC; intervallo ammesso 19,2–28,8 V |
| Maximum no-load current | 75 mA |
| Common encoder supply | L+ minus 0.8 V; 1 A maximum total for both channels |
| Perditio potentiæ typica | 4 W |
| Per-channel input address area | 16 Bytes |
| Per-channel output address area | 12 bytes; 4 bytes for Motion Control |
| Longitudo cavi encoderis scutati | Usque ad 600 m, secundum frequentiam et qualitatem cavi; maximum 50 m ad 200 kHz |
| Minimum isochronous bus cycle | 250 µs |
| Intervallum mensurae frequentiae | 0,04 Hz–800 kHz |
| Intervalum mensurae durationis cycli | 1,25 µs–25 s |
Quaestiones Frequenter Rogatae
Num possum coniungere encoderem RS422 5 V directe ad 6ES7550-1AA00-0AB0?
Haec versio destinata est ad signales encoderis 24 V fontis aut sink.
Num 6ES7550-1AA00-0AB0 supportat signales controlis localis pro apparatu mobilis?
An incremental input of 200 kHz reaches a counting rate of 800 kHz via quadruple signal evaluation.
How far can the encoder cable extend at full speed on 6ES7550-1AA00-0AB0?
At an input frequency of 200 kHz, the maximum length of shielded encoder cable is 50 m.
Can I halt and resume counting using a sensor connected to 6ES7550-1AA00-0AB0?
A digital input can serve as a hardware gate; software gating is also supported.
Can 6ES7550-1AA00-0AB0 switch a digital output when the count reaches a setpoint?
Two comparators per channel can activate the configurable digital outputs based on comparison values.
How much encoder-supply current can be drawn from 6ES7550-1AA00-0AB0?
The shared 24 V encoder supply permits a total maximum current of 1 A across both channels.
Can 6ES7550-1AA00-0AB0 be used for an S7-1500 motion axis?
Acquisitio positionis incrementalis suadetur pro S7-1500 Motion Control.
