Siemens 6ES7151-1AB02-0AB0 IM151-1 FO STANDARD ET 200S Interface Module

Conspectus

SIMATIC ET 200S · fiber-optic PROFIBUS DP

6ES7151-1AB02-0AB0 IM151-1 FO STANDARD ET 200S Interface Module

Fiber-optic PROFIBUS DP interface module for ET 200S remote I/O stations with a 128-byte input and output address range.

Ad Primum Aspectum

Nota	Siemens
Modellum	6ES7151-1AB02-0AB0
Typus Producti	Fiber-optic PROFIBUS DP interface module
Functio principalis	Connects an ET 200S station to a PROFIBUS DP master over optical fiber
Series Compatible	SIMATIC ET 200S / IM151-1 FO STANDARD

Conexio optica DP

Ligat stacionem ET 200S ad magistrum PROFIBUS DP per interfaciem optico-fibrosam.

areis I/O de 128 octetis

Supportat usque ad 128 octeta adlocandorum introductorum et 128 octeta adlocandorum effectorum.

Planificatio rete linearis

Interfacies opticae integratae disponuntur ut linea optico-fibrosa secundum directiones installationis Siemens.

Product Overview

6ES7151-1AB02-0AB0 est modulus interfaciei IM151-1 FO STANDARD pro statione remota I/O SIMATIC ET 200S. Datam cum magistro PROFIBUS DP per interfaciem optico-fibrosam integratam commutat.

Siemens hoc numerum ordinis ut versionem FO STANDARD priorem identificat, quae habet maximum 128 octeta pro introductoribus et 128 octeta pro effectoribus. Linea optica stationis et connexiones electricae potentiae secundum instructiones operationis ET 200S observandae sunt.

Focus ordinandi: Adaptet exactam generationem IM151-1 FO, allocationem adlocandorum stationis de 128 octetis, connectores opticos et connexiones electricas supply 24 V.

Key Functions

Interficies optica ET 200S

Modulus connectit ET 200S dorsum planum et stationem I/O ad DP magistrum per calefactum opticum.

Commercium datorum stationis

Prior versio 6ES7151-1AB02-0AB0 sustinet usque ad 128 octetos pro singulis adressationibus input et output.

Conectio lineae opticae

Siemens specificat conectores simplex, adaptatorem connexiunculae et calefactum opticum duplex pro interfacie.

Official Specifications

Siemens Article Number	6ES7151-1AB02-0AB0
Designatio producti	IM151-1 FO STANDARD
I/O systema	SIMATIC ET 200S
Campusbus	PROFIBUS DP
Medium bus	Câble en fibre optique
Maximum area adressionis intrantis	cXXVIII octetorum
Maximum area adressionis egredientis	cXXVIII octetorum
Topologia rete optica	Linea
Dispositio calefacti optici	Calefactum opticum duplex
Hardware pro conector optik	Konector simplex kun adapter plug
Set konector lan polis	6GK1901-0FB00-0AA0
Adapter plug	6ES7195-1BE00-0XA0
Kabel tegangan suplai	24 V DC, terminal 1L+ lan 1M
Terminal suplai loop-through	2L+ lan 2M
Typus terminalis supplicationis	Terminalis tipo viti
Portus opticus extremi lineae	Adhibe obturatorem vacuum supplitum ad interfaciem opticam non usitatum

Fons officialis: Instructiones operationis Siemens ET 200S .

Quaestiones Frequenter Rogatae

Quae est utilitas numeri ordinis 6ES7151-1AB02-0AB0?

Hoc praebet interficiem PROFIBUS DP fibrae-opticae pro stazione I/O remota SIMATIC ET 200S.

Quod spatium adressarum input configurare possum in 6ES7151-1AB02-0AB0?

Haec generatio numerorum ordinis FO STANDARD tractat usque ad 128 octetos adressarum input.

Quod spatium adressarum output configurare possum in 6ES7151-1AB02-0AB0?

The corresponding maximum is 128 bytes of output addresses.

Which optical topology should I use with 6ES7151-1AB02-0AB0?

Use a line topology for networks with integrated optical interfaces.

What happens if power or fiber is removed from 6ES7151-1AB02-0AB0 mid-line?

Devices further downstream in the optical line become inaccessible.

Which connector hardware should I use with 6ES7151-1AB02-0AB0?

Use simplex connector/polishing set 6GK1901-0FB00-0AA0 and plug adapter 6ES7195-1BE00-0XA0.

How should I protect an unused end optical interface on 6ES7151-1AB02-0AB0?

Fit the supplied blanking plug to the unused interface at the end of the optical line.

Compatibility & Ordering Notes

Before ordering 6ES7151-1AB02-0AB0: Controlla la generatio exacte del modulo de interfacie e le configuration del ET 200S. Le station 6ES7151-1AB02-0AB0 es limitate a 128 bytes de input e 128 bytes de output; verifica ambes allocationes de adresse ante le substitution.

Controllas del station e del linea optice

• Confirma que le station ET 200S usa le interfacie DP in fibra optice IM151-1 FO STANDARD.
• Controlla le spatios de adresse programmate pro input e output contra le limites de 128 bytes.
• Confirma que le connectores simplex, le adaptatores de plug e le cable optice duplex corresponde al linea installate.
• Controlla le alimentation de 24 V e le terminales de connexion in serie, e blocca le interfacie optice inalterate al capo non usate.

Hot Selling Models