Siemens 6ES7151-1AA06-0AB0 SIMATIC ET 200S IM151-1 Modulus Interficialis Standardis

Conspectus

Siemens Automātiō Industrialis

Siemens 6ES7151-1AA06-0AB0 SIMATIC ET 200S IM151-1 Modulus Interficialis Standardis

IM151-1 Standard PROFIBUS DP interface module for ET 200S distributed I/O.

Ad Primum Aspectum

Nota	Siemens
Modellum	6ES7151-1AA06-0AB0
Typus Producti	SIMATIC ET 200S IM151-1 Standard interface module
Functio principalis	Connects ET 200S I/O to PROFIBUS DP
Series Compatible	SIMATIC ET 200S Distributus I/O

Rôl statio

PROFIBUS DP interface for ET 200S distributed I/O.

Expansio

Up to 63 I/O modules across a maximum 2 m station bus.

INGENIARIA

DPV0 or DPV1 slave operation and firmware update with STEP 7.

Product Overview

6ES7151-1AA06-0AB0 is the IM151-1 Standard interface module for a SIMATIC ET 200S distributed I/O station. It connects the station to PROFIBUS DP through an RS485 interface and supports up to 63 I/O modules over a maximum 2 m station bus.

Focus ordinandi: check the full order number, existing ET 200S station configuration, 9-pin D-sub bus connection and 24 V DC supply.

Key Functions

Coniunctio Distributa I/O

Conectet stacionem ET 200S ad magistrum PROFIBUS DP per RS485.

Ampliatio stationis

Subsidit stationem cum usque ad 63 modulis coniunctis et 244 octetis utriusque spatii adressationis, input et output.

Diagnostics et manutentio

Praebet diagnostics, data identificationis et actualisationes firmware per PROFIBUS DP utendo STEP 7.

Official Specifications

Latitudo Moduli	45 mm
Pondus Approximatum	150 g
Velocitates transmissionis PROFIBUS DP	9,6 kBd usque ad 12 Mbit/s, velocitates fixae subiectae
Interface Communicationis	RS485
Longitudo maxima bus stationis	2 m
Numerus maximus modulorum I/O	63
Spatium adressationis input et output	244 octeta utriusque
Longitudo Parametri	27 octets
Maximum PROFIBUS Interface Output Current	80 mA
Alimentation électronique nominale	24 V DC
Minimum Voltage Failure Backup	20 ms
Current Consumption at Rated Supply	Approximately 200 mA
Perdita de Potentia Typical del Modulo	3,3 W
Maximum Potential Difference to Rail	75 V CC ou 60 V CA
Testis voltagii isolationis	500 V DC

Fons officialis:  Siemens technical document for 6ES7151-1AA06-0AB0 .

Quaestiones Frequenter Rogatae

Can 6ES7151-1AA06-0AB0 connect an ET 200S station to PROFIBUS DP?

The interface links ET 200S to PROFIBUS DP through RS485.

How many I/O modules can I use behind 6ES7151-1AA06-0AB0?

The interface supports up to 63 modules in one station.

Quam longe potest ET 200S station bus extendere cum 6ES7151-1AA06-0AB0?

Station bus usque ad 2 m extendere potest.

Num 6ES7151-1AA06-0AB0 ut DPV1 servus configurari potest?

Interficies aut DPV0 aut DPV1 servum operari potest.

Quantos processus datos 6ES7151-1AA06-0AB0 adhibere potest?

Interficies 244 bytes pro inputis et 244 bytes pro outputis praebet.

Num firmawarum 6ES7151-1AA06-0AB0 per busum actualizare possum?

Firmawarum per PROFIBUS DP cum STEP 7 et correcto modulo-specifico actualizationis file actualizari potest.

Quae priora modula 6ES7151-1AA06-0AB0 substituere potest?

Hoc modulus IM151-1 Standard ordinis numeri ab 6ES7151-1AA00-0AB0 usque ad 6ES7151-1AA05-0AB0 substituit.

Compatibility & Ordering Notes

Antequam ordinatis 6ES7151-1AA06-0AB0: verificate configurationem loculi ET 200S, connexionem bus sub-D 9-pin, longitudinem stationis et idoneum fasciculum firmware quando substituitis priorem modulum IM151-1 Standard.

Index Compatibilitatis

• Adaptate stationem ET 200S installatam et interfaciem PROFIBUS DP/RS485 antequam substituatis modulum IM151-1 Standard.
• Examinete connexionem PROFIBUS sub-D 9-pin et modum operationis DPV0 vel DPV1 configuratum.
• Mantinite stationem infra 63 modulos I/O et infra 2 m longitudinem bus stationis.
• Pro substitutione 6ES7151-1AA00-0AB0 usque ad 6ES7151-1AA05-0AB0, servate configurationem projecti et utite fasciculum firmware pro hoc exacto modulo.

Hot Selling Models