Siemens 3SU1401-1BB20-3AA0 SIRIUS ACT Red LED Module 24 V AC/DC

Conspectus

SIEMENS SIRIUS ACT

3SU1401-1BB20-3AA0 SIRIUS ACT Red LED Module 24 V AC/DC

A front-plate-mounted red LED module with an integrated light source, spring-loaded terminals and a rated 24 V AC/DC supply.

Ad Primum Aspectum

Nota	Siemens
Modellum	3SU1401-1BB20-3AA0
Typus Producti	LED illumination module
Functio principalis	Red control-panel indication
Applicatio	SIRIUS ACT front-panel assemblies

Integrated red light source

The LED produces 450–1120 mcd light intensity for the selected signaling point.

Alimentatio contruli AC vel DC

Eadem modulus accipit tensionem nominalem 24 V DC vel 24 V AC ad 50 vel 60 Hz.

Coniunctio per terminalia molicula

Conductores flexibiles nudi et parati habent limites diversae sectionis transversae permisse.

Product Overview

3SU1401-1BB20-3AA0 addit illuminationem LED rubram integratam ad conformationem signali SIRIUS ACT in facie anterius.

Modulus terminalium molicularum montatur in parte posteriori supportis in positione centrali et operat ex alimentatione contruli 24 V AC/DC electa.

Focus ordinandi: Adaptate illuminationem rubram, operationem 24 V AC/DC et terminalia molicula ad operatorem destinatum et supportum tabulae anterioris.

Key Functions

Illuminare punctum signali rubri electum

Fons lucis integratus praebet illuminationem rubram sine transformatoris lampadis separabilis.

Accipere tensionem contruli disponibilem

Operation at 24 V AC or DC supports common panel control supplies within the specified voltage tolerance.

Fit behind the panel holder

The narrow module attaches in the center mounting position on the rear of the SIRIUS ACT holder.

Official Specifications

Tensione de alimentation nominal	24 V AC a 50/60 Hz o 24 V DC
Permissible supply tolerance	−30% / +25%
Maxima Consumptio Electrica	25 mA
Maxima Currus Inrumpens	2 A
Tensionis insulatio evaluata	320 V
Tensione impulsiva subita evaluata	4 kV
Gradus Contaminations	3
Intensitas luminis	450–1120 mcd
Vita de functionamento typical	100,000 H
Electrica connectio	Terminales cum mola
Bare solid and finely stranded conductor range	2 × (0.25–1.5 mm²)
Praeparatus subtiliter torquatus conductoris ambitus	2 × (0.25–0.75 mm²)
Module Protection	Carcasa IP40; terminales IP20
Operans ambientium temperatus	−25 ad +70 °C
Temperatura ambientalis servandae	−40 ad +80 °C
Operativus Relativus Umor	10–95 %, sin condensación
Resistencia a golpes, IEC 60068-2-27	15 g, 11 ms half-sine pulse
Resistencia a vibraciones, IEC 60068-2-6	5 g over 10–500 Hz
Dimensiones (L × H × D)	9.8 × 36 × 29.4 mm
Peso neto del módulo	7 g

Fons officialis: Siemens exact red LED module data sheet · SIRIUS ACT LED module mounting

Quaestiones Frequenter Rogatae

Ubi 3SU1401-1BB20-3AA0 adhaeret ad supportum tabulae anterioris?

Modulus LED montatur in facie posteriori supporti in positione centrali.

Num possum usare 3SU1401-1BB20-3AA0 ad illuminandum tabulam viridem?

Non, fons lucis incorporatus est ruber.

Num 3SU1401-1BB20-3AA0 requirit transformatorium lampadis separatum?

Non, hic modulus LED habet fontem lucis incorporatum et nullum transformatorium lampadis.

Quanta inductio commutativa debet outputus regulans permittre pro 3SU1401-1BB20-3AA0?

Apparatus commutativus debet admittere inductio maximam 2 A et etiam currentem operativam maximam 25 mA.

Num potest conductor flexibilis praeparatus 1,0 mm² connecti ad 3SU1401-1BB20-3AA0?

Non, conductores subtiliter intorti cum praeparatione extremitatis limitantur ad 0,75 mm².

Will 3SU1401-1BB20-3AA0 tolerate a control-supply voltage 20% below 24 V?

Yes, a 20% reduction lies within the specified negative operating-voltage tolerance of 30%.

Can 3SU1401-1BB20-3AA0 be installed where condensation is expected during operation?

No, condensation is not permitted within the specified operating environment.

Compatibility & Ordering Notes

Before ordering 3SU1401-1BB20-3AA0: Select the red spring-terminal module with the intended SIRIUS ACT operator and holder, allow for the switching inrush and maintain a non-condensing operating environment.

Compatibility Checklist for 3SU1401-1BB20-3AA0

• Use the holder’s center rear mounting position.
• Match the 24 V AC/DC control supply.
• Keep prepared flexible conductors within 0.75 mm².
• Praebere protectionem integram coniunctionis partis anterioris separatim, ut requiritur.

Hot Selling Models