Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
siemens 6gk1900 0ab00 simatic net c plug configuration storage-0

For SIEMENS

Home >  Products >  For SIEMENS

Siemens 6GK1900-0AB00 SIMATIC NET C-PLUG Configuration Storage

Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months

  • Overview
  • Hot Selling Models
  • Recommended Products
Overview
SIEMENS SIMATIC NET

6GK1900-0AB00 SIMATIC NET C-PLUG Configuration Storage

A removable C-PLUG for retaining configuration, engineering and application data and carrying the saved configuration to a compatible replacement network device.

At a Glance

Brand Siemens
Model 6GK1900-0AB00
Product Type Removable configuration storage plug
Core Function Transferring saved device configuration during replacement
Application Compatible SIMATIC NET devices with a C-PLUG slot

Replacement configuration

A compatible replacement device can continue with the saved configuration at startup.

Cold insertion only

The PLUG is inserted or removed with the host device switched off.

Configuration storage

This is a C-PLUG rather than a KEY-PLUG licensing accessory.

Product Overview

6GK1900-0AB00 is a removable configuration storage medium for compatible SIMATIC NET devices equipped with a C-PLUG slot, including supported SCALANCE switches, security devices and communication processors.

The plug retains the device configuration for transfer to a compatible replacement, while DHCP assignments and functions tied to MAC addresses need to be considered during the replacement workflow.

Ordering focus: Match the host device and its PLUG support, preserve the saved configuration, and plan any DHCP or MAC-dependent changes before replacing the network device.
Key Functions

Carry the device configuration to a replacement

When a compatible replacement starts with a valid plug, it adopts the saved device configuration, supporting recovery after a device fault.

Keep storage and licensing roles distinct

The accessory is a C-PLUG for configuration storage, without the KEY-PLUG licensing function.

Support controlled insertion and fault diagnosis

Insert or remove the plug only with the host powered off; an incorrect or damaged plug can produce a host fault indication.

Official Specifications
Operating Ambient Temperature −40 to +75 °C
Storage and Transport Temperature −40 to +80 °C
Maximum Relative Humidity 95% at 25 °C, without condensation
Degree of Protection IP20
Dimensions (Width × Height × Depth) 24.3 × 17 × 8.1 mm
Net Weight 5 g
Protective Coating No conformal coating
Frequently Asked Questions

Can I move 6GK1900-0AB00 to a replacement device without entering the whole configuration again?

A compatible replacement device starts with the saved configuration when it accepts the valid plug.

Why can a DHCP address change after moving 6GK1900-0AB00 to another device?

The DHCP server may need reconfiguration for the replacement device before the same IP configuration is obtained.

What needs attention if the configuration on 6GK1900-0AB00 uses MAC-based functions?

Functions based on MAC addresses require reconfiguration for the replacement hardware.

May I pull 6GK1900-0AB00 out of a SCALANCE SC-600 while it is running?

Switch the device off before inserting or removing the plug because removal during operation can trigger a restart.

What can cause a SCALANCE SC-600 fault indication after fitting 6GK1900-0AB00?

An incorrect plug from another product or a damaged plug can cause the device to signal a fault with its F LED.

Does 6GK1900-0AB00 provide the licensed functions of a KEY-PLUG?

The accessory is a C-PLUG configuration medium and does not provide the KEY-PLUG function.

Can I use 6GK1900-0AB00 in a network device that has no PLUG slot?

The removable medium requires a supported SIMATIC NET host equipped with the corresponding PLUG slot.

Compatibility & Ordering Notes
Before ordering 6GK1900-0AB00: Select the C-PLUG for the supported host and its configuration-transfer workflow, keeping storage accessories separate from any KEY-PLUG licensing requirement.

Compatibility Checklist for 6GK1900-0AB00

  • Use a supported SIMATIC NET device with a C-PLUG or compatible PLUG slot.
  • Supported families include the listed SCALANCE X, S, M and W products and the specified SIMATIC NET communication processors.
  • Power down the host before removing or inserting the plug.
  • Account for DHCP server assignments and MAC-dependent configuration when replacing hardware.
  • Keep the enclosure and environmental conditions within the specified IP20 and non-condensing limits.
Hot Selling Models
GT2-CH2M
7000-12241-6250500
10-UKH 50 3001763
5SY4306-6
WTR2-P621S27 1042271
3RV1421-1AA10
0181461001
3LD2530-0TK13
SV9340.560
EVZ5223-5DO-01F-Q
5SY6232-7
Allen-Bradley 100-MO9N3
LPJ30SP
6ES7158-0AA01-0XA0
Schunk 1395343

Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
email goToTop

Evolo Automation is not an authorized distributor unless otherwise specified, representative, or affiliate of the manufacturer of this product. All trademarks and documents are the property of their respective owners and are provided for identification and informational.