EN
Siemens 6SE7090-0XX84-0KA0 SIMOVERT MASTERDRIVES ADB Adapter Board
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Hot Selling Models
- Recommended Products
Overview
- Match the carrier to the installed MASTERDRIVES or explicitly supported SIMOREG host arrangement.
- Use the LBA in a SIMOREG Control Module supplementary-board installation.
- Limit each ADB to two miniature-format boards.
- Occupy location 2 before using location 3 in the SIMOREG Control Module.
- Apply the technology-board restrictions before combining encoder, terminal-expansion and communication options.
- Distinguish the bare ADB article from the complete retrofit kit.
6SE7090-0XX84-0KA0 SIMOVERT MASTERDRIVES ADB Adapter Board
An ADB carrier for miniature-format option boards, providing the mounting interface used by communication, terminal-expansion and encoder options in compatible drive systems.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6SE7090-0XX84-0KA0 |
| Product Type | ADB adapter board |
| Core Function | Carries compact supplementary boards |
| Application | Compatible drive electronics boxes |
Miniature-board carrier
Up to two miniature-format boards fit one ADB.
Separate bus adapter
The ADB carrier and LBA local-bus adapter perform different installation roles.
Option-board planning
The permissible board combination depends on the electronics-box configuration.
Product Overview
6SE7090-0XX84-0KA0 provides the carrier required to install miniature-format option boards in compatible SIMOVERT MASTERDRIVES electronics boxes.
The same ADB article is listed for SIMOREG DC-MASTER Control Module option installations, where the LBA, available locations and permitted board combinations must be planned together.
Key Functions
Support miniature-format options
The carrier accommodates compact option boards such as CBC, CBP, EB1, EB2, SBP and SLB in the applicable host configuration.
Provide two compact-board positions
One ADB can carry a maximum of two miniature-format boards.
Integrate with the host option arrangement
In a SIMOREG Control Module, the LBA supplies the required local-bus mounting interface and the ADB carries the compact supplementary boards.
Official Specifications
| Maximum Miniature-Board Capacity | Two supplementary boards per ADB |
|---|---|
| Electronics-Box Mounting Positions | Position 2 with slots D and E, or position 3 with slots F and G |
| Net Weight | 0.140 kg |
| Option-Board Electrical Connection | 64-pole system connector |
| Carrier Retention | Two fixing screws at the upper and lower handles |
| Option-Board Retention | Two front fixing screws per option board |
| Hot-Swap Capability | No energized insertion or removal |
| RoHS Compliance | Not RoHS-compliant |
Frequently Asked Questions
Can I fit a miniature CBP board directly into the electronics box without 6SE7090-0XX84-0KA0?
The miniature communication board requires the ADB carrier in the applicable electronics-box arrangement.
Does 6SE7090-0XX84-0KA0 replace the LBA needed by a SIMOREG Control Module?
The LBA remains necessary because the local-bus adapter and miniature-board carrier are separate components.
How many miniature option boards can one 6SE7090-0XX84-0KA0 carry?
A maximum of two miniature-format supplementary boards can be inserted in one carrier.
Can I leave location 2 empty and install 6SE7090-0XX84-0KA0 in location 3 of a SIMOREG Control Module?
Location 3 must not be used until location 2 is occupied.
Can I combine an SBP encoder board and a technology board through 6SE7090-0XX84-0KA0 in a SIMOREG Control Module?
The specified Control Module arrangement does not permit SBP, SLB, EB1 or EB2 alongside a technology board.
Does ordering 6SE7090-0XX84-0KA0 include the same accessories as the retrofit kit?
The bare-board article is separate from retrofit kit 6SE7010-0KA00, which includes the board accessories and short guide.
What should I do before touching the circuit board on 6SE7090-0XX84-0KA0?
Discharge static electricity from your body by touching a grounded conductive object before handling the board.
