EN
Siemens SIMATIC S7-300F CPU 319F-3 PN/DP 6ES7318-3FL00-0AB0
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Product Overview
- Key Functions
- Official Specifications
- Frequently Asked Questions
- Compatibility & Ordering Notes
- Hot Selling Models
- Recommended Products
Overview
SIEMENS • SIMATIC S7-300F
6ES7318-3FL00-0AB0 SIMATIC S7-300F CPU 319F-3 PN/DP
The CPU 319F-3 PN/DP is a fail-safe S7-300 controller for personnel safety, machine safety and burner control, while also supporting a standard automation program.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6ES7318-3FL00-0AB0 |
| Product Type | Fail-safe programmable controller CPU |
| Core Function | Runs safety-related and standard automation programs over PROFIBUS and PROFINET |
| Application or Compatible Series | SIMATIC S7-300F controller systems |
Exact Identification
Match 6ES7318-3FL00-0AB0 character by character and confirm the complete SIMATIC S7-300F CPU 319F-3 PN/DP designation.
Interface Arrangement
Confirm the installed supply, ports, field connections and required accessories before wiring the replacement.
Configuration Check
Preserve the approved engineering project, network parameters and application data used by the installed system.
Product Overview
The CPU 319F-3 PN/DP is a fail-safe S7-300 controller for personnel safety, machine safety and burner control, while also supporting a standard automation program.
The F-CPU executes a safety program and can also run the standard automation application. The controller detects an inconsistent safety program during startup and enters STOP with a diagnostic event. The fail-safe default process image is 1,024 bytes for inputs and 1,024 bytes for outputs.
Key Functions
Combined Safety and Standard Control
The F-CPU executes a safety program and can also run the standard automation application.
Safety Startup Consistency Check
The controller detects an inconsistent safety program during startup and enters STOP with a diagnostic event.
Expanded Safety Process Image
The fail-safe default process image is 1,024 bytes for inputs and 1,024 bytes for outputs.
Official Specifications
| Hardware Release | 01 |
|---|---|
| Firmware Baseline | V2.5.2 |
| Default Process Image | 1,024 bytes inputs and 1,024 bytes outputs |
| Safety and Standard Programs | Both supported |
| Initial STEP 7 Baseline | V5.4 SP1 with HSP 121 |
| Firmware V2.6 Engineering Baseline | STEP 7 V5.4 SP2 with HSP 143 |
| Firmware V2.7 Engineering Baseline | STEP 7 V5.4 SP4 |
| Safety Option Package | S7 Distributed Safety V5.4 SP1 or higher |
| Safety Startup Consistency Detection | Supported |
| Inconsistent Safety-Program Response | CPU changes to STOP |
| Diagnostic Buffer Event | Inconsistent safety program |
| RAM-to-ROM Handling | Safety-program data blocks are not copied from work memory to load memory |
| F-Data Block Operations | Creation and deletion through SFC 22, SFC 23 and SFC 82 are not supported |
Frequently Asked Questions
Can 6ES7318-3FL00-0AB0 run a standard program alongside the safety program?
The F-CPU supports both safety-related and standard automation applications.
Which STEP 7 package is required for the V2.5.2 baseline of 6ES7318-3FL00-0AB0?
Use STEP 7 V5.4 SP1 with HSP 121 and the required S7 Distributed Safety option for safety applications.
What process-image size is the safety default for 6ES7318-3FL00-0AB0?
The default is 1,024 bytes for inputs and 1,024 bytes for outputs.
How does 6ES7318-3FL00-0AB0 react to an inconsistent safety program at startup?
The CPU detects the inconsistency, enters STOP and records a diagnostic event.
Can F-data blocks be created or deleted dynamically on 6ES7318-3FL00-0AB0?
The specified create and delete system functions do not support F-data blocks.
What happens to safety data blocks during RAM-to-ROM on 6ES7318-3FL00-0AB0?
Safety-program data blocks are not copied from work memory into load memory.
Which applications are appropriate for 6ES7318-3FL00-0AB0?
The controller is intended for personnel safety, machine safety and burner-control tasks together with standard automation.
Compatibility & Ordering Notes
Compatibility Checklist
- Retain the validated STEP 7 and S7 Distributed Safety engineering environment for the installed firmware.
- Back up the standard and safety programs and record the accepted safety signature before replacement.
- Confirm the complete PROFIBUS, PROFINET and fail-safe I/O configuration before commissioning.
