EN
Siemens SIMADYN D EA12 Analog Output Module 6DD1642-0BC0
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Product Overview
- Key Functions
- Official Specifications
- Frequently Asked Questions
- Compatibility & Ordering Notes
- Hot Selling Models
- Recommended Products
Overview
SIEMENS · SIMADYN D
6DD1642-0BC0 SIMADYN D EA12 Analog Output Module
The SIMADYN D EA12 is an eight-channel analog output module with ±10 V outputs, 14-bit performance, a 20-pin process connector and front-accessible test sockets.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6DD1642-0BC0 |
| Product Type | Eight-channel analog output module |
| Core Function | Converts controller output values into isolated cabinet-level analog voltage signals |
| Application or Compatible Series | SIMADYN D subrack systems using the L-bus and slot-1 EA12 assignment |
Exact Identification
Match 6DD1642-0BC0 character by character and confirm the complete SIMADYN D EA12 Analog Output Module designation.
Interface Arrangement
Confirm the installed supply, ports, field connections and required accessories before wiring the replacement.
Configuration Check
Preserve the approved engineering project, network parameters and application data used by the installed system.
Product Overview
The SIMADYN D EA12 is an eight-channel analog output module with ±10 V outputs, 14-bit performance, a 20-pin process connector and front-accessible test sockets.
The output channels deliver bipolar voltage signals with defined linearity and monotonicity for control applications. Eight pairs of front test sockets provide access to the channel signals during commissioning and maintenance. The module occupies slot 1 and communicates through the SIMADYN D L-bus.
Key Functions
Precision Analog Outputs
The output channels deliver bipolar voltage signals with defined linearity and monotonicity for control applications.
Service-Friendly Test Points
Eight pairs of front test sockets provide access to the channel signals during commissioning and maintenance.
Defined Subrack Integration
The module occupies slot 1 and communicates through the SIMADYN D L-bus.
Official Specifications
| Output Voltage Range | -10 to +10 V |
|---|---|
| Maximum Output Current per Channel | ±10 mA |
| Recommended Current at ±10 V | ±5 mA for noise suppression |
| Digital Resolution | 13 bits plus sign; 1 mV |
| Accuracy | 14 bits; 1 mV |
| Absolute Linearity | ±0.6 mV |
| Differential Linearity | ±1 mV |
| Monotonicity | 14 bits |
| Simultaneous Channel Load | 10 mA on all eight outputs |
| Short-Circuit Protection | 56 Ω series resistance; maximum 120 s to ground |
| Temperature Dependency | Maximum approximately ±240 µV per ±1 °C |
| Process Connector | 20-pin |
| Front Test Connections | 8 pairs of 2.3 mm sockets |
| +5 V Supply Range / Typical Current | 4.75 to 5.25 V / 600 mA |
| +15 V Supply Range / Typical Current | 14.4 to 15.6 V / 200 mA |
| -15 V Supply Range / Typical Current | -15.6 to -14.4 V / 200 mA |
| Module Width × Height × Depth | 20.14 × 233.4 × 220 mm |
| Approximate Weight | 0.5 kg |
Frequently Asked Questions
What signal range is available from 6DD1642-0BC0?
Each channel provides a bipolar output from -10 to +10 V.
How much current can each output of 6DD1642-0BC0 deliver?
The channel limit is ±10 mA, while ±5 mA at full voltage is recommended when additional noise suppression is desired.
Where is 6DD1642-0BC0 installed in the subrack?
The assigned installation position is slot 1, with communication through the L-bus.
How can output channels on 6DD1642-0BC0 be measured during service?
Use the corresponding pair of 2.3 mm front test sockets with appropriate measuring equipment.
Is 6DD1642-0BC0 protected against an output short circuit?
A 56 Ω series resistance provides limited protection for a short to ground lasting no more than 120 seconds.
Which supply rails are required by 6DD1642-0BC0?
The module uses +5 V, +15 V and -15 V rails within their specified tolerance ranges.
What must be recorded before replacing 6DD1642-0BC0?
Record the slot, connector wiring, channel scaling, polarity, load values and the application configuration for all outputs.
Compatibility & Ordering Notes
Compatibility Checklist
- Confirm the SIMADYN D subrack type, L-bus arrangement and designated slot before installation.
- Verify every channel load, polarity and scaling against the existing process wiring.
- Isolate the cabinet and preserve application data before removing the module.
