EN
- Overview
- Quick Detail
- Description
- Applications
- Specifications
- Competitive Advantage
- Recommended Products
Overview
Place of Origin: |
USA |
Brand Name: |
Bently Nevada |
Model Number: |
330130-035-00-CN |
Packaging Details: |
Original new Factory Sealed |
Delivery Time: |
5-7 days |
Payment Terms: |
T/T |
Supply Ability: |
In stock |
Quick Detail
|
Cable Length Option: |
3.5 meters (13.1 feet) |
|
Connector Protector and Cable Option: |
Standard cable |
|
Agency Approval Option: |
CSA, ATEX, IECEx Approvals |
|
Extension Cable Material: |
75 Q triaxial, fluoroethylene propylene (FEP) insulated |
|
Dimension: |
18x18x1.5cm |
|
Weight: |
0.12kg |
Description
330130-035-00-CN is a 3.5 m (13.1 ft) standard extension cable for 3300 XL proximity systems in industrial automation. The 330130-035-00-CN uses 75 Ω triaxial FEP insulated cable with 50 Ω output resistance and 69.9 pF/m capacitance. Supply sensitivity is less than 2 mV per volt. The 330130-035-00-CN supports 0–10 kHz frequency response with up to 305 m field wiring and 2 mm linear range. Field wiring accepts 0.2–1.5 mm² (16–24 AWG). Operating temperature is -52°C to +177°C. The 330130-035-00-CN carries CSA, ATEX, and IECEx approvals, meeting vibration and position monitoring needs in turbines, compressors, and motors.
Applications
Application for turbine shaft vibration monitoring
Install 330130-035-00-CN between 8 mm probe and Proximitor sensor to transmit radial vibration signals from steam or gas turbine shafts operating up to 10 kHz bandwidth.
Application for compressor axial position measurement
Use 330130-035-00-CN to connect thrust position probes measuring within a 2 mm linear range for axial displacement tracking in centrifugal compressors.
Application for motor bearing housing installation
Route 330130-035-00-CN through conduit up to 305 m field wiring to deliver proximity signals from large electric motor bearings to control cabinets.
Specifications
|
Supply Sensitivity: |
Less than 2 mV change in output voltage per volt change in input voltage |
|
Output Resistance: |
50 Ω |
|
Extension Cable Capacitance: |
69.9 pF/m (21.3 pF/ft) typical |
|
Field Wiring: |
0.2 to 1.5 mm2 (16 to 24 AWG) |
|
Linear Range: |
2 mm (80 mils) |
|
Frequency Response: |
(0 to 10 kHz), +0, -3 dB, with up to 305 meters (1000 feet) of field wiring |
|
Minimum Target Size: |
15.2 mm (0.6 in) diameter (flat target) |
|
Operating and Storage Temperature: |
-52°C to +177°C (-62°F to +350°F) |
Competitive Advantage
Competitive advantage for high temperature installation
Deploy 330130-035-00-CN in areas reaching +177°C without additional cooling or shielding due to FEP insulation rating.
Competitive advantage for hazardous area certification
Select 330130-035-00-CN for ATEX and IECEx zones to connect proximity probes in oil and gas processing units.
Competitive advantage for controlled signal capacitance
Use 330130-035-00-CN 3.5 m length to match calibrated capacitance requirements of 3300 XL systems and maintain accurate probe scaling.
