330130-035-00-00 3300 XL Standard Extension Cable

Overview

Place of Origin:	USA
Brand Name:	Bently Nevada
Model Number:	330130-035-00-00
Packaging Details:	Original new Factory Sealed
Delivery Time:	5-7 days
Payment Terms:	T/T
Supply Ability:	In stock

Quick Detail

Description

330130-035-00-00 is a 3.5-meter standard extension cable engineered for 3300 XL 8 mm proximity transducer systems in industrial automation. Built with 75 Ω triaxial FEP insulation, 330130-035-00-00 provides typical capacitance of 69.9 pF/m and 50 Ω output resistance to transmit eddy current signals across up to 305 meters of total field wiring. The 0–10 kHz frequency response supports vibration and shaft position monitoring within a 2 mm linear range. With supply sensitivity below 2 mV per volt change, 330130-035-00-00 delivers precise signal output for turbine, compressor, and pump protection systems. Supporting 0.2–1.5 mm² wiring and operating from –52°C to +177°C, 330130-035-00-00 fits automation cabinets and rotating equipment measurement loops requiring accurate displacement and speed signal extension.

Applications

Connect Proximity Probe to Turbine Vibration Monitor

330130-035-00-00 links the 8 mm probe to vibration monitoring modules in steam and gas turbines. The 69.9 pF/m capacitance of 330130-035-00-00 helps maintain waveform accuracy within the 0–10 kHz band used for shaft vibration tracking. The 2 mm linear range allows precise radial displacement measurement during startup and load change.

Transmit Axial Shaft Position in Compressor Control Panels

In centrifugal compressors, 330130-035-00-00 carries axial position signals from the probe to the protection system. The 50 Ω output resistance in 330130-035-00-00 reduces signal reflection in installations with long cable routing up to 305 meters. Low supply sensitivity below 2 mV/V keeps voltage variation within measurable limits during power fluctuation.

Extend Pump Bearing Displacement Signals to Automation Cabinet

For fluid-film bearing pumps, 330130-035-00-00 transfers displacement signals used to monitor bearing clearance. The 3.5 m cable length of 330130-035-00-00 supports flexible installation inside skid-mounted systems, while the –52°C to +177°C range allows mounting near heated pump housings.

Deliver Keyphasor Pulse to Speed Monitoring Module

330130-035-00-00 transmits Keyphasor reference pulses and rotational speed signals. The 75 Ω triaxial design of 330130-035-00-00 supports clean pulse transfer within the 0–10 kHz frequency range required for turbine and generator speed measurement.

Specifications

Competitive Advantage

Competitive Advantage in Controlled Electrical Parameters for Long Wiring

With 69.9 pF/m capacitance and support for 305 meters of field wiring, 330130-035-00-00 allows calculation of total system capacitance before installation. This defined value supports predictable signal amplitude across large automation layouts.

Competitive Advantage in Wide Temperature Deployment Near Rotating Equipment

330130-035-00-00 operates from –52°C to +177°C, enabling installation near turbines, compressors, and pumps exposed to heat or outdoor cold climates. FEP insulation in 330130-035-00-00 resists thermal breakdown under continuous exposure.

Competitive Advantage in Reduced Signal Reflection During Long Cable Routing

The 75 Ω impedance and 50 Ω output resistance of 330130-035-00-00 help reduce signal reflection in extended routing paths. This configuration supports accurate displacement and vibration data transmission in automated protection systems.

Competitive Advantage in Flexible Cabinet Termination

330130-035-00-00 supports 0.2 to 1.5 mm² wiring sizes, allowing direct termination into industrial monitoring modules. The 3.5 m length of 330130-035-00-00 provides routing flexibility inside control cabinets and machinery skids.