330103-05-10-10-02-05 3300 XL 8 mm Proximity Probes

Overview

Place of Origin:	USA
Brand Name:	Bently Nevada
Model Number:	330103-05-10-10-02-05
Packaging Details:	Original new Factory Sealed
Delivery Time:	5-7 days
Payment Terms:	T/T
Supply Ability:	In stock

Quick Detail

Description

330103-05-10-10-02-05 is a 3300 XL 8 mm Proximity Probe designed for automation vibration and position monitoring. 330103-05-10-10-02-05 uses an M10x1 threaded case with 50 mm minimum unthreaded length and 100 mm case length, allowing direct installation in bearing housings. The total cable length is 1.0 meter with a miniature coaxial ClickLoc connector and standard cable.

330103-05-10-10-02-05 provides a 2 mm (80 mils) linear measurement range. Output resistance is 50 Ω, and extension cable capacitance is 69.9 pF/m, supporting direct wiring with 0.2–1.5 mm² (16–24 AWG). Supply sensitivity is less than 2 mV per volt change, limiting output deviation during voltage variation. Operating temperature ranges from −52°C to +177°C.

With CSA, ATEX, and IECEx approvals, 330103-05-10-10-02-05 is suitable for hazardous areas in oil, gas, and power plants. 330103-05-10-10-02-05 measures shaft vibration, axial position, Keyphasor signals, and rotational speed in turbines, compressors, and motors, delivering voltage output proportional to probe gap for integration into automation monitoring systems.

Applications

Install in ATEX Zone to Measure Radial Shaft Vibration

330103-05-10-10-02-05 mounts directly into M10x1 threaded ports in compressor and turbine bearing housings. Within the 2 mm linear range, 330103-05-10-10-02-05 tracks shaft vibration amplitude and transmits proportional voltage through its 1.0 m cable with 69.9 pF/m capacitance. The 50 Ω output resistance of 330103-05-10-10-02-05 supports direct connection to monitoring racks located outside hazardous areas.

Mount in Thrust Bearing to Track Axial Position

With 50 mm minimum unthreaded length and 100 mm case body, 330103-05-10-10-02-05 allows defined probe gap adjustment. Up to 15 mm thread engagement ensures secure installation. Axial movement within the 2 mm range generates measurable voltage change, enabling automation systems to detect rotor displacement in turbines operating up to +177°C.

Generate Speed Pulse from Shaft Mark

330103-05-10-10-02-05 detects once per revolution marks and converts distance variation into pulse signals. Supply sensitivity remains below 2 mV per volt change, so 330103-05-10-10-02-05 limits output variation during input voltage fluctuation, ensuring accurate speed calculation.

Operate in High and Low Temperature Industrial Sites

Operating from −52°C to +177°C, 330103-05-10-10-02-05 performs in outdoor compressor stations and enclosed turbine casings. The 1.0 meter ClickLoc cable enables fast wiring using 0.2–1.5 mm² conductors.

Specifications

Competitive Advantage

Enable Direct Installation in Classified Hazardous Areas

With CSA, ATEX, and IECEx approvals, 330103-05-10-10-02-05 can be installed in explosive gas zones without additional protective housing.

Deliver Defined Electrical Output with 50 Ω Interface

The fixed 50 Ω output resistance combined with 69.9 pF/m cable capacitance ensures predictable signal transmission across the 1.0 m extension when using 330103-05-10-10-02-05.

Cover Wide Operating Temperature Span of 229°C

From −52°C to +177°C, 330103-05-10-10-02-05 handles both cold start outdoor equipment and high heat turbine applications using a single probe type.

Provide Measured Mechanical Mounting Dimensions

The 50 mm unthreaded section, 100 mm case length, and maximum 15 mm thread engagement allow precise probe positioning inside the 2 mm linear measurement range when installing 330103-05-10-10-02-05.