EN
Siemens SIMATIC ET 200L 32 DI Blocus Electronicus 6ES7131-1BL12-0XB0
Fabricator: Siemens
Condición: Nuevo
Plazo de Entrega: En Stock
Origo: Germania
Garantía: 12 Meses
Inscriptio electronica: [email protected]
whatsapp: +86-18150117685
- Conspectus
- Producta commendata
Conspectus
- Confirm that the field inputs are 24 V DC and use the required two groups of 16 channels.
- Verify whether the installed station uses the TB 16SC Smart Connect expansion.
- Match the configured PROFIBUS DP transmission rate and station settings.
- Check the BF, ON, SF and channel LEDs during commissioning after wiring is complete.
SIEMENS SIMATIC DP • ET 200L
6ES7131-1BL12-0XB0 ET 200L 32 DI Electronic Block
A 24 V DC digital-input electronic block with 32 onboard inputs and Smart Connect expansion for distributed PROFIBUS DP I/O.
Ad Primum Aspectum
| Nota | Siemens |
|---|---|
| Modellum | 6ES7131-1BL12-0XB0 |
| Typus Producti | SIMATIC DP ET 200L electronic block |
| Functio principalis | Acquires 32 digital input signals at 24 V DC |
| Series Compatible | ET 200L with TB 16SC Smart Connect expansion |
Identificatio exacta.
Match the complete article number and the installed terminal-block arrangement before replacement.
Field-Signal Fit
Designed for 24 V DC digital signals from switches and two-wire proximity sensors.
Systematis Integratio
Connects to PROFIBUS DP and supports expansion by up to 16 channels through one TB 16SC.
Product Overview
6ES7131-1BL12-0XB0 is a Siemens SIMATIC DP electronic block for the ET 200L distributed I/O system. It provides 32 onboard digital inputs for 24 V DC signals and is intended for acquiring switch and proximity-sensor states over PROFIBUS DP.
The expandable design accepts one TB 16SC Smart Connect terminal block, adding a maximum of 16 channels. Front indicators provide channel status, bus-fault, supply-monitoring and group-fault information for commissioning and maintenance.
Key Functions
Distributed Digital Input Acquisition
Processes 32 digital input channels in two groups of 16 for 24 V DC field signals.
Smart Connect Expansion
Extends the station by up to 16 additional channels through a TB 16SC terminal block.
PROFIBUS DP Diagnostics
Supportat communicatio PROFIBUS DP cum facultatibus FREEZE et SYNC, plus indicatores status BF, ON et SF dedicati.
Official Specifications
| Protocolum Bus | PROFIBUS DP |
|---|---|
| Supported Transmission Rates | 9.6, 19.2, 93.75, 187.5, 500 et 1500 kbit/s |
| FREEZE Capability | Ita |
| Capacitas SYNC | Ita |
| Alarma processus | Nullus |
| Functio Diagnostica | Disponibilis |
| Indicator Fallo Bus | LED rubra BF |
| Indicator Subministratio Electronica | LED viridis ON |
| Indicator Fallo Gruppi | LED Ruber SF |
| Intervalum Tensionis Signali 1 | 13 to 30 V DC |
| Intervalum Tensionis Signali 0 | -30 ad 5 V DC |
| Curentus intrans ad signalem 1 | Typice 5 mA ad 24 V |
| Retardatio Ingressus pro utroque Transitione | 2,0 usque ad 4,5 ms |
| Caracteristica input | IEC 61131-2 Type 1 |
| Maxima Longitudo Cavi Scutati | 1000 m |
| Longitudo Maximae Cavi Non Scuti | 600 m |
| Maxima quiescens currentia sensoris duarum filarum | 1.5 mA |
| Tensio Probae Isolationis | 500 V DC |
Quaestiones Frequenter Rogatae
Num 6ES7131-1BL12-0XB0 expandi potest cum additis canalibus I/O?
Hoc instrumentum unum terminale TB 16SC Smart Connect accipit, ut usque ad 16 canales addantur.
Quae instrumenta campestria ad 6ES7131-1BL12-0XB0 connecti possunt?
Hoc elementum electronicum aptum est ad interruptores 24 V DC et ad sensus propinquitatis duarum filarum, quorum quiescens currentia usque ad 1,5 mA est.
Quae velocitates transmissionis PROFIBUS DP ab 6ES7131-1BL12-0XB0 suffulti sunt?
Velocitates suffultae sunt 9,6; 19,2; 93,75; 187,5; 500; et 1500 kbit/s.
Quomodo indicatores anteriores ad diagnosticandum 6ES7131-1BL12-0XB0 adiuvant?
Verdes LED canalis ostendunt statum intrantium, ruber LED BF faultum in bus identificat, viridis LED ON potestatem electronicam monitorat, et ruber LED SF faultum in gruppo nuntiat.
Quae limites longitudinis cavi uti debes cum 6ES7131-1BL12-0XB0?
Usus est longitudo maxima cavi signali campi 1000 m si cinctus, aut 600 m si non cinctus.
Num 6ES7131-1BL12-0XB0 isolationem galvanicam praebet?
Intrantes inter se non sunt isolati, sed a PROFIBUS DP isolati sunt et ad 500 V DC examinati sunt.
Quid ante substituendum 6ES7131-1BL12-0XB0 verificare debes?
Examina totum suffigium, terminalem blocum ET 200L, omnem expansionem TB 16SC, connexionem intrantium 24 V DC, et configuratam velocitatem PROFIBUS DP.
