Siemens 6SL3210-5HE11-5UF0 SINAMICS S210 Servo Drive
Fabricator: Siemens
Condición: Nuevo
Plazo de Entrega: En Stock
Origo: Germania
Garantía: 12 Meses
Inscriptio electronica: [email protected]
whatsapp: +86-18150117685
- Conspectus
- Product Overview
- Key Functions
- Official Specifications
- Quaestiones Frequenter Rogatae
- Compatibility & Ordering Notes
- Hot Selling Models
- Producta commendata
Conspectus
Siemens Automātiō Industrialis
6SL3210-5HE11-5UF0 SINAMICS S210 Servo Drive
Compact SINAMICS S210 servo drive for precise single-axis motion with a 1.5 kW motor power rating.
Ad Primum Aspectum
| Nota | Siemens |
|---|---|
| Modellum | 6SL3210-5HE11-5UF0 |
| Typus Producti | Servo coegi |
| Functio principalis | Closed-loop control of one servo axis |
| Applicatio vel series compatibiles | SINAMICS S210 motion-control systems |
Electrical Match
Confirm the 200–480 V three-phase input and 5 A rated output.
Motion Duty
Size the drive against the motor torque, speed and duty cycle.
Adaptation dans l’armoire
Allow for the 70 × 322 × 223 mm Frame Size B enclosure.
Product Overview
This drive converts a three-phase 200–480 V supply into controlled power for a synchronous servo motor. Its compact Frame Size B housing suits cabinet-mounted positioning and dynamic motion tasks.
The exact electrical ratings, cooling clearances and motor compatibility should be checked before replacement or a new installation.
Key Functions
Controlus Axis Servorum
Regulates motor current and motion for precise dynamic positioning.
Wide-Line Input
Accepts a three-phase 200–480 V AC supply across the specified tolerance range.
Compact integration
Provides a cabinet-friendly Frame Size B design for S210 systems.
Official Specifications
| Tensio ingressus | 3 AC 200–480 V, −10%/+10% |
|---|---|
| Correntia input | 6,0 A |
| Frequentia Lineae | 45–66 Hz |
| Currentis Output Aestimatus | 5,0 A |
| Frequens output | 0–550 Hz |
| Potentia motoris nominalis | 1.5 kW |
| Gradus praesidium | IP20 |
| Magnitudo Frami | B |
| Dimensiones (L × H × D) | 70 × 322 × 223 mm |
| Ponderis netum | 3.3 kg |
Fons officialis: Siemens official technical data for 6SL3210-5HE11-5UF0 .
Quaestiones Frequenter Rogatae
What supply is required for 6SL3210-5HE11-5UF0?
Use a three-phase 200–480 V AC source within the specified tolerance and 45–66 Hz range.
Can 6SL3210-5HE11-5UF0 run any 1.5 kW motor?
Motor compatibility depends on voltage, current, feedback and motion-duty requirements, so verify the complete drive-motor combination.
How much panel space does 6SL3210-5HE11-5UF0 need?
The enclosure is 70 mm wide, 322 mm high and 223 mm deep; also retain the required cooling clearances.
Is 6SL3210-5HE11-5UF0 suitable for open mounting?
No. The IP20 rating requires installation in a suitable control cabinet.
What output-current rating applies to 6SL3210-5HE11-5UF0?
The rated output current is 5.0 A.
What should be checked before replacing 6SL3210-5HE11-5UF0?
Confirm the complete article number, motor data, supply, parameter backup, feedback connection and mechanical fit.
Does 6SL3210-5HE11-5UF0 need commissioning after installation?
Yes. Restore or configure the approved parameters and validate direction, limits, feedback and safety behavior before production use.
Compatibility & Ordering Notes
Compatibility Checklist for 6SL3210-5HE11-5UF0
- Confirmare supplitiam triphasicam et protectionem superiorem.
- Verificare motorum connexum et systema retroactionis.
- Comparare dimensiones magnitudinis cadrī B et spatium refrigerationis.
- Reservare et validare parametres commissionis approbatas.