Siemens 6GK5991-1AM00-8AA0 SCALANCE Single-Mode SFP Transceiver
Fabricator: Siemens
Condición: Nuevo
Plazo de Entrega: En Stock
Origo: Germania
Garantía: 12 Meses
Inscriptio electronica: [email protected]
whatsapp: +86-18150117685
- Conspectus
- Hot Selling Models
- Producta commendata
Conspectus
- Use an SFP slot and transceiver combination approved for the selected SCALANCE host.
- Match the opposite optical interface to 1000BASE-LX and single-mode 1310 nm operation.
- Calculate fiber and connector loss against the transmitter and receiver power limits.
- Observe the host-dependent installation temperature and the 16-hour limit at the transceiver maximum of +85°C.
6GK5991-1AM00-8AA0 SCALANCE Single-Mode SFP Transceiver
Gigabit single-mode optical interface with LC connector, 1310 nm wavelength, and link distance up to 10 km.
Ad Primum Aspectum
| Nota | Siemens |
|---|---|
| Modellum | 6GK5991-1AM00-8AA0 |
| Typus Producti | Plug-in optical transceiver |
| Functio principalis | Fiber-optic Ethernet communication |
| Applicatio | Compatible SCALANCE network components |
Gigabit single-mode link
One LC optical connection carries 1000 Mbit/s Ethernet over single-mode fiber.
Defined optical power budget
Specified transmitter output and receiver limits support calculation of fiber loss and connector allowances.
Latched SFP installation
The compact module plugs into the host transceiver slot and locks with a latch.
Product Overview
6GK5991-1AM00-8AA0 provides a plug-in fiber-optic interface for a compatible SCALANCE network component, using a latched SFP construction.
The optical link operates with single-mode fiber at 1310 nm and 1000BASE-LX, with transmitter and receiver power limits that define the permitted fiber-link budget.
Key Functions
Gigabit single-mode link
One LC optical connection carries 1000 Mbit/s Ethernet over single-mode fiber.
Defined optical power budget
Specified transmitter output and receiver limits support calculation of fiber loss and connector allowances.
Latched SFP installation
The compact module plugs into the host transceiver slot and locks with a latch.
Official Specifications
| Interficies Optica | 1 LC port at 1000 Mbit/s for single-mode fiber |
|---|---|
| Norma Transmissionis | 1000BASE-LX |
| Longitudo Undae Opticae | 1310 nm |
| Potentia Signi Emissi | −9.5 to −3 dBm |
| Ingressus Recipientis Maximum | −3 dBm |
| Minimum Receiver Sensitivity | −19 dBm |
| Required minimum link attenuation | 0 dB |
| Intervalum ligaturae opticae | 0–10 km, dependens ex fibra |
| Temperatura operativa | −40 ad +85°C; +85°C permittitur usque ad 16 horae |
| Temperatura servandi et transportandi | −40 ad +85°C |
| Humiditas relativa | 95% maximum ad 25°C, non condensans |
| Classis Protectionis | IP20 |
| Fixatio Meccanica | Insertio SFP clausa |
| Dimensiones et massa | 14 × 9 × 57 mm (latus × altus × profundus); 0.02 kg |
| Normae EMC | EN 61000-6-4:2007 emissio classis A; EN 61000-6-2:2005 immunitas |
Quaestiones Frequenter Rogatae
Quam combinationem fibrae et connexi uti debes cum 6GK5991-1AM00-8AA0?
Utere fibra monomodali terminata pro interfacie optica LC.
Can 6GK5991-1AM00-8AA0 establish a 10 km Ethernet link?
The optical range extends to 10 km when the fiber and total link attenuation satisfy the optical power limits.
What Ethernet mode must the peer of 6GK5991-1AM00-8AA0 support?
The link uses 1000BASE-LX at 1000 Mbit/s and a wavelength of 1310 nm.
How much optical power may enter the receiver of 6GK5991-1AM00-8AA0?
The receiver input must not exceed −3 dBm.
Can 6GK5991-1AM00-8AA0 remain at +85°C continuously?
The specified maximum of +85°C is permitted for a duration of up to 16 hours.
How is 6GK5991-1AM00-8AA0 secured in its host slot?
The SFP module is retained by a latch after insertion into the compatible transceiver slot.
Does choosing 6GK5991-1AM00-8AA0 alone establish the host temperature rating?
The complete installation must remain within both the transceiver limits and the temperature limits of the approved host configuration.