Siemens 6ES7963-1AA00-0AA0 SIMATIC S7-400 IF963-RS232 modulo interfacis
Fabricator: Siemens
Condición: Nuevo
Plazo de Entrega: En Stock
Origo: Germania
Garantía: 12 Meses
Inscriptio electronica: [email protected]
whatsapp: +86-18150117685
- Conspectus
- Hot Selling Models
- Producta commendata
Conspectus
- Kongruigu la interfaco-generadon AA00 kun AA10 al la instalita CP.
- Tenu la RS232-kablon ne pli longa ol 15 m.
- Uzu serian partneron kaj kablon kompatiblan kun RS232-signaloj.
- Elektu la bezonatan protokolon per la konfigurado de la gastiga CP.
6ES7963-1AA00-0AA0 SIMATIC S7-400 IF963-RS232 Modulus interfacialis
IF963-RS232 praebet interfaciem physicam seriam pro processorum communicationis CP 441 compatibilibus, cum velocitatibus transmissionis usque ad 115,2 kbit/s et limite cavi 15 m.
Ad Primum Aspectum
| Nota | Siemens |
|---|---|
| Modellum | 6ES7963-1AA00-0AA0 |
| Typus Producti | MODULUS INTERFACIEI INSERTANDUS |
| Functio principalis | Coniunctio RS232 punctum-ad-punctum |
| Applicatio | Processores communicationis CP 441 compatibiles |
Stratum physicum serium
Significatio RS232 servit coniunctioni punctum-ad-punctum CP 441.
Adaptatio specifica generationis
The AA00 interface belongs to the earlier CP 441 hardware generation.
Compact interface
The module measures 20 × 70 × 95 mm and weighs approximately 80 g.
Product Overview
6ES7963-1AA00-0AA0 is the IF963-RS232 plug-in interface for compatible SIMATIC S7-400 CP 441 communication processors. It provides the RS232 physical connection while the host CP handles the selected communication driver.
The interface supports up to 115.2 kbit/s over a maximum cable length of 15 m, making cable distance and CP hardware generation central selection points.
Key Functions
Conexio RS232
The interface provides the electrical layer for point-to-point serial communication on the host CP.
Host-based protocol operation
Compatible CP 441 processors provide drivers such as ASCII and 3964(R), with the available driver set determined by the CP model.
Earlier CP 441 hardware support
IF963 interfaces ending in AA00 are assigned to CP 441 hardware up to the xAA04 generation, while the xAA05 generation uses AA10 interfaces.
Official Specifications
| Maxima celeritas transmissionis | 115,2 kbit/s |
|---|---|
| Longitudo Maxima Cavi | 15 m |
| Maxima Consumptio Electrica | 100 mA |
| Perditio potentiæ typica | 0,5 W |
| Dimensiones (L × H × D) | 20 × 70 × 95 mm |
| Pondus Approximatum | 80 g |
Quaestiones Frequenter Rogatae
Will 6ES7963-1AA00-0AA0 fit a CP 441 with an xAA05 order-number suffix?
That CP generation uses IF963 interfaces ending in AA10, while the AA00 interface belongs to CP hardware up to the xAA04 generation.
Can 6ES7963-1AA00-0AA0 communicate directly without a CP 441?
The interface is a plug-in physical-layer module that operates through a compatible CP 441 communication processor.
How far can I run the RS232 cable from 6ES7963-1AA00-0AA0?
The specified maximum cable length is 15 m.
Can I run 6ES7963-1AA00-0AA0 at 115.2 kbit/s?
The interface supports a maximum transmission rate of 115.2 kbit/s.
Does fitting 6ES7963-1AA00-0AA0 add RK512 to a CP 441-1?
The host processor determines the driver set, with RK512 available on CP 441-2 rather than CP 441-1.
Can I use 6ES7963-1AA00-0AA0 as an RS422 or RS485 interface?
This interface provides RS232 signaling rather than the RS422 or RS485 physical layer.
What power budget should I allow for 6ES7963-1AA00-0AA0?
The interface has a maximum current consumption of 100 mA and a typical power loss of 0.5 W.