EN
Siemens SIMATIC S7-400 6ES7416-3ER05-0AB0 CPU 416-3 PN/DP
Fabricator: Siemens
Status: Novissimum
Tempus Expectatus: In Stoc
Origo: Germania
Praestatio: 12 menses
Email: [email protected]
whatsapp: +86-18150117685
- Praevisio
- Productum Overview
- Functiones Principales
- Official Specifications
- FREQUENTLY ASKED QUESTIONS
- Compatibility & Ordering Notes
- Hot Selling Models
- Pròdòt ràccumandà
Praevisio
6ES7416-3ER05-0AB0 CPU 416-3 PN/DP
Siemens 6ES7416-3ER05-0AB0 is a SIMATIC S7-400 CPU 416-3 PN/DP with firmware V5.3, 11.2 MB work memory, MPI/DP, PROFIBUS DP and integrated PROFINET communication.
At a Glance
| Nomen commerciale / Fabricator | Siemens |
|---|---|
| Model / Article Number | 6ES7416-3ER05-0AB0 |
| Product Type | SIMATIC S7-400 CPU 416-3 PN/DP Central Processing Unit |
| Functio principalis | Executes S7-400 control programs with MPI/DP, PROFIBUS DP and integrated PROFINET communication |
| Application / Compatible Series | Modular SIMATIC S7-400 automation systems |
Identificatio exacta.
Match the complete article number, photographed nameplate and firmware level before replacement.
Arrangementum Interfacis
Confirmare MPI/DP, PROFIBUS DP, Ethernet/PROFINET et coniunctiones IF 964-DP optativas ab projectu installato usurpatas.
Configuration Check
Verificare catalogum hardware STEP 7, cartam memoriae, positionem rae duorum locorum, attributionem et nomina dispositivorum PROFINET antequam in operationem mittatur.
Productum Overview
6ES7416-3ER05-0AB0 est unitas centralis processus Siemens SIMATIC S7-400 CPU 416-3 PN/DP cum memoria operativa integrata 11,2 MB. Unit MPI/DP, PROFIBUS DP et communicationem Ethernet/PROFINET integratam pro systematibus automationis modularibus S7-400.
Siemens praescribit firmam V5.3 et STEP 7 V5.4 SP4 cum actualizatione hardware applicabili ad configurationem. Interficies Ethernet integrata includit interruptorem RJ45 biiugum pro PROFINET IO, dum modulus insertilis IF 964-DP potest praebere ulteriorem interfaciem DP.
Functiones Principales
Elaboratio et Memoria
Exequitur operationes bit, verbum et puncti fixi in 30 ns et operationes puncti fluitantis in 90 ns, cum memoria operativa integrata 11,2 MB divisa aequo inter codicem et datos.
Interreticulatio Industrialis
Combinat communicationem MPI/DP usque ad 12 Mbps cum interfacie Ethernet biiportu integrata pro PROFINET IO, communicatione S7, directione et communicatione aperta IE.
Expansiones et Diagnostica S7-400
Sustinet unum cuneum centralem cum usque ad 21 unitatibus expansionis, aliam interfaciem DP per IF 964-DP, et tamponem diagnosticum programmabilem cum usque ad 3200 intrationibus.
Official Specifications
| Versio Firmamentalis | V5.3 |
|---|---|
| Memoria operativa | 11,2 MB totalis (5,6 MB pro codice et 5,6 MB pro datis) |
| Integrated load memory | 1024 KB RAM |
| Memoria de Carga Expandible | Cardina FLASH usque ad 64 MB; cardina RAM usque ad 64 MB |
| Tempus Exsecutionis pro Operationibus Bit, Verbi et Puncti Fixi | 30 ns |
| Tempus Operationis Puncti Fluctuantis | 90 ns |
| Numerus S7 Contra et Temporizatores Disponibiles | 2048 contra et 2048 temporizatores |
| Totalis I/O-Adressarea | 16 KB inpuut / 16 KB outpuut |
| Capacitas expansionis rack | 1 rack centralis cum usque ad 21 unitatibus expansionis |
| Interfacs Ethernet / PROFINET | Interruptor bipoertus integratus; 2 × RJ45; 10/100 Mbps autosensibilis |
| Dispositiva PROFINET IO | Maximum 256 |
| Servos PROFIBUS DP | Maximum 125 |
| Dimensiones montandi (L × A × P) | 50 × 290 × 219 mm |
| Fissurae Requisitae | 2 |
| Pondus Approximatum | 0,9 kg |
| S7-400 Backplane Current at 5 V DC | 1.2 A typice; 1.4 A maxime |
| Ammissio Potentiae | 6.0 W typical |
Fons officialis: Siemens SIMATIC S7-400 CPU Specifications, section 10.8 for 6ES7416-3ER05-0AB0 . Stockus commercialis, garantia et affirmationes de expeditione sunt conditiones venditoris.
FREQUENTLY ASKED QUESTIONS
Which STEP 7 version is required to configure 6ES7416-3ER05-0AB0?
Siemens specifies STEP 7 V5.4 SP4 or later with the relevant hardware update for firmware V5.3.
How much work and load memory does 6ES7416-3ER05-0AB0 provide?
The CPU provides 11.2 MB integrated work memory, divided into 5.6 MB for code and 5.6 MB for data. It also has 1024 KB integrated RAM load memory and supports FLASH or RAM memory cards up to 64 MB.
Which communication interfaces are available on 6ES7416-3ER05-0AB0?
The first interface supports MPI/DP at up to 12 Mbps. The integrated Ethernet interface uses a two-port switch with two RJ45 sockets and supports PROFINET IO; an IF 964-DP module can provide the additional DP interface.
How much rack space is needed for 6ES7416-3ER05-0AB0?
Dimensiones de montaje: 50 × 290 × 219 mm; la CPU ocupa dos ranuras S7-400.
¿Cuántos dispositivos PROFINET IO puede controlar el modelo 6ES7416-3ER05-0AB0?
El controlador PROFINET IO integrado admite hasta 256 dispositivos PROFINET IO, sujeto al área de direcciones configurada, al número de submódulos y a los requisitos de tiempo de actualización.
¿Qué debe verificarse antes de reemplazar el modelo 6ES7416-3ER05-0AB0?
Verifique el número de pedido completo, el nivel de hardware y firmware de la CPU, la configuración de hardware STEP 7, el tipo de tarjeta de memoria, la asignación del bastidor, los ajustes MPI/DP, las direcciones PROFIBUS y los nombres de los dispositivos PROFINET antes de poner en servicio el reemplazo.
¿Qué capacidad de diagnóstico ofrece el modelo 6ES7416-3ER05-0AB0?
La CPU dispone de un buffer de diagnóstico programable con hasta 3200 entradas, configurado por defecto con 120 entradas, y soporta funciones de estado/modificación para puesta en servicio y resolución de problemas.
Compatibility & Ordering Notes
Compatibility Checklist for 6ES7416-3ER05-0AB0
- Confirm that the rack provides two slots and that the cabinet power budget supports the specified S7-400 backplane current.
- Use STEP 7 V5.4 SP4 or later with the applicable hardware update when engineering firmware V5.3.
- Check whether the installed project uses a FLASH or RAM memory card and preserve the program and configuration before replacement work.
- Record MPI/DP and PROFIBUS addresses, PROFINET device names, IP settings, configured IO devices and any IF 964-DP module before removal.
- Verify connector allocation, network topology and the configured I/O address areas before applying power to a replacement CPU.
- Do not treat a later CPU 416-3 PN/DP revision as a drop-in substitute until its firmware, memory, interfaces and STEP 7 hardware configuration have been checked against the existing project.
