EN
Siemens SIMATIC S7-300 CPU 317-2 PN/DP 6ES7317-2EK13-0AB0
Fabricator: Siemens
Condición: Nuevo
Plazo de Entrega: En Stock
Origo: Germania
Garantía: 12 Meses
Inscriptio electronica: [email protected]
whatsapp: +86-18150117685
- Conspectus
- Product Overview
- Key Functions
- Official Specifications
- Quaestiones Frequenter Rogatae
- Compatibility & Ordering Notes
- Hot Selling Models
- Producta commendata
Conspectus
SIEMENS · SIMATIC S7-300
6ES7317-2EK13-0AB0 SIMATIC S7-300 CPU 317-2 PN/DP
The CPU 317-2 PN/DP provides 1 MB of work memory, an MPI/PROFIBUS DP interface and an Ethernet PROFINET interface for distributed automation.
Ad Primum Aspectum
| Nota | Siemens |
|---|---|
| Modellum | 6ES7317-2EK13-0AB0 |
| Typus Producti | Programmable logic controller CPU with PROFINET and PROFIBUS |
| Functio principalis | Runs S7-300 control programs and coordinates distributed I/O over PROFINET and PROFIBUS DP |
| Applicatio vel series compatibiles | SIMATIC S7-300 systems requiring high-capacity work memory and integrated PN/DP communication |
Identificatio exacta.
Match 6ES7317-2EK13-0AB0 character by character and confirm the complete SIMATIC S7-300 CPU 317-2 PN/DP designation.
Arrangementum Interfacis
Confirmare ante connexionem substitutionis supplitum installatum, portus, connexiones campestres et accessoria requisa.
Configuration Check
Servare projectum ingenieriae approbatum, parametres rete et data applicationis quae systema installatum utitur.
Product Overview
The CPU 317-2 PN/DP provides 1 MB of work memory, an MPI/PROFIBUS DP interface and an Ethernet PROFINET interface for distributed automation.
Integrated PN and DP interfaces connect Ethernet and PROFIBUS automation devices. The CPU supplies the documented work-memory capacity for larger S7-300 programs. The PROFINET interface supports the approved IO controller and IO device functions.
Key Functions
Integratio Rete Duplex
Interfacies PN et DP integratae conectunt dispositiva automationis Ethernet et PROFIBUS.
Memoria Unius Megabiti
CPU praebet capacitatem memoriae operativae documentatam pro programmatibus S7-300 maioribus.
Rolia Controlleris et Dispositivi
Interficies PROFINET sustinet functiones IO controlleris et IO dispositivi approbatas.
Official Specifications
| Genus CPU | CPU 317-2 PN/DP |
|---|---|
| Memoria Laboris Integra | 1 MB |
| Referentia firmware | Generatio Plataformae V2.3.4 |
| Primary Interface | MPI / PROFIBUS DP |
| Velocitas interfaciei principalis | Usque ad 12 Mbit/s |
| Interfex secundarius | Ethernet PROFINET |
| Commutatio PROFINET | Integrated 2-port switch |
| Contrôleur PROFINET IO | Supportata |
| PROFINET IO Apparatus | Supportata |
| Extended PROFINET diagnostics | Supported from firmware V2.5 |
| Micro Carta Memoriae | Required |
| Carta Servosum Firmware | 4 MB aut plura pro procedura actualizationis documentata |
| Rated Supply | 24 V DC |
| Operatio isochrona | Adiuvatur per PROFIBUS DP aut PROFINET |
| Engineering Platform | SIMATIC STEP 7 |
Quaestiones Frequenter Rogatae
Quae rete industrialia in 6ES7317-2EK13-0AB0 integrantur?
CPU praebet MPI/PROFIBUS DP et Ethernet PROFINET interfacia.
Quantum memoriae operativae in 6ES7317-2EK13-0AB0 disponibilis est?
Capacitas memoriae operativae integratae est unus megabytes.
Num 6ES7317-2EK13-0AB0 requirit memoriam oneris amovibilem?
Ita; insere cartam memoriam Micro SIMATIC compatibilem.
Num 6ES7317-2EK13-0AB0 ut PROFINET IO controller operare potest?
Yes; configure the interface and every IO device in the approved STEP 7 project.
What should be preserved before replacing 6ES7317-2EK13-0AB0?
Back up the STEP 7 project, MMC contents, IP settings, device name, DP addresses and diagnostic data.
Can a later hardware generation replace 6ES7317-2EK13-0AB0 without project changes?
Do not assume direct interchangeability; verify hardware catalog, firmware and communication behavior first.
What must be checked after installing 6ES7317-2EK13-0AB0?
Verify startup, PROFINET topology, PROFIBUS operation, process I/O and controller diagnostics.
Compatibility & Ordering Notes
Index Compatibilitatis
- Use the exact CPU hardware entry supported by the STEP 7 project.
- Preserve the Micro Memory Card and all PN/DP network parameters.
- Validate both communication interfaces after replacement.
