Siemens 6ES7195-7HC00-0XA0 ET 200M BM 1 × 80 Active Bus Module
Fabricator: Siemens
Condición: Nuevo
Plazo de Entrega: En Stock
Origo: Germania
Garantía: 12 Meses
Inscriptio electronica: [email protected]
whatsapp: +86-18150117685
- Conspectus
- Hot Selling Models
- Producta commendata
Conspectus
- Use one 80 mm-wide S7-300 I/O module at this base position.
- Assemble on the ET 200M active-bus rail and engage the neighboring bus connection.
- Select the interface and active-bus arrangement required for removal and insertion functionality.
- Do not combine the I/O bus-base structure with BM DP/PA or BM Y coupler modules.
6ES7195-7HC00-0XA0 ET 200M BM 1 × 80 Active Bus Module
An active bus base for one 80 mm-wide S7-300 I/O module in an ET 200M configuration supporting module removal and insertion.
Ad Primum Aspectum
| Nota | Siemens |
|---|---|
| Modellum | 6ES7195-7HC00-0XA0 |
| Typus Producti | Active backplane bus module |
| Functio principalis | Maintains the module connection during I/O exchange |
| Applicatio | ET 200M active-bus stations |
One wide I/O position
The base accommodates one 80 mm-wide S7-300 I/O module rather than two separate 40 mm modules.
Active backplane assembly
The bus module connects to the neighboring active bus base along the ET 200M mounting rail.
Serviceable I/O structure
The active-bus arrangement supports removal and insertion of I/O modules when the station configuration provides that function.
Product Overview
6ES7195-7HC00-0XA0 provides the active backplane position for an 80 mm-wide S7-300 I/O module.
The BM 1 × 80 base is part of the ET 200M active-bus arrangement used for removal and insertion functionality and can be combined with the corresponding station interface and other permitted I/O bus bases.
Key Functions
One wide I/O position
The base accommodates one 80 mm-wide S7-300 I/O module rather than two separate 40 mm modules.
Active backplane assembly
The bus module connects to the neighboring active bus base along the ET 200M mounting rail.
Serviceable I/O structure
The active-bus arrangement supports removal and insertion of I/O modules when the station configuration provides that function.
Official Specifications
| Dimensiones (L × H × D) | 97 × 92 × 30 mm loose; width 80 mm when installed |
|---|---|
| Pondus Approximatum | 127 g |
| I/O module capacity | 1 module, 80 mm wide |
| ABS marine type approval | 26-0631605-PDA |
| CCS marine type approval | HB26PTB00031 |
| ClassNK marin type approbation | TA26618M |
| KR marin type approbation | HMB29074-AC009 |
| Bureau Veritas marin type approbation | 09049/F3 BV |
Quaestiones Frequenter Rogatae
Can 6ES7195-7HC00-0XA0 carry two separate 40 mm I/O modules?
Hoc base est ad unum modulum I/O latum 80 mm, dum duo loca lata 40 mm utuntur basem BM 2 × 40.
Num sola installatio 6ES7195-7HC00-0XA0 omnes stationes ET 200M commutabilis calore facit?
Remotio et insertio requirunt aptam configurationem moduli bus activi et moduli interfacialis pro tota statione.
Quomodo 6ES7195-7HC00-0XA0 ad basim bus proximam iungitur?
Adnecte basim ad railem, collocare eam, deinde urge ad sinistram donec connector eius contigit modulum bus proximum.
Num 6ES7195-7HC00-0XA0 cum basibus BM DP/PA vel BM Y coupler in eadem structura misceri potest?
Bases bus I/O non debent cum basibus BM DP/PA vel BM Y coupler in eadem structura misceri.
Quam multum latitudinis raelis installatae 6ES7195-7HC00-0XA0 occupat?
Latitudo installata est 80 mm, licet modulus solutus 97 mm latitudinem habeat.
Quae series tectorum cum installatione 6ES7195-7HC00-0XA0 associatur?
The cover set 6ES7195-1JA00-0XA0 includes four backplane bus covers and one bus module cover.
Which partition is available for intrinsically safe areas besides 6ES7195-7HC00-0XA0?
The ET 200M explosion-proof partition is available under order number 6ES7195-1KA00-0XA0 for the required separation in the station.