EN
Siemens SIMATIC RF300 RF380R RFID Reader 6GT2801-3AB10
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Product Overview
- Key Functions
- Official Specifications
- Frequently Asked Questions
- Compatibility & Ordering Notes
- Hot Selling Models
- Recommended Products
Overview
Siemens • SIMATIC RF300 identification system
6GT2801-3AB10 SIMATIC RF300 RF380R RFID Reader
The SIMATIC RF380R is an HF RFID reader with an integrated antenna for RF300, ISO 15693 and ISO 18000-3 identification applications.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6GT2801-3AB10 |
| Product Type | HF RFID reader with integrated antenna |
| Core Function | Reads and writes RF300 and ISO transponders through an integrated 13.56 MHz antenna |
| Application or Compatible Series | RF300 identification applications with communication modules or PC systems |
Exact Identification
Match 6GT2801-3AB10 character by character and confirm the complete SIMATIC RF300 RF380R RFID Reader designation.
Interface Arrangement
Confirm the installed supply, ports, field connections and required accessories before wiring the replacement.
Configuration Check
Preserve the approved engineering project, network parameters and application data used by the installed system.
Product Overview
The SIMATIC RF380R is an HF RFID reader with an integrated antenna for RF300, ISO 15693 and ISO 18000-3 identification applications.
The reader operates at 13.56 MHz and includes its own antenna for RF300 and ISO transponder applications. An M12 eight-pin connection provides RS-232 or RS-422 communication using the 3964R protocol. The PA 12 enclosure is rated IP67 and supports operation from -25 to +70 °C.
Key Functions
Integrated HF Identification
The reader operates at 13.56 MHz and includes its own antenna for RF300 and ISO transponder applications.
Serial System Connection
An M12 eight-pin connection provides RS-232 or RS-422 communication using the 3964R protocol.
Industrial Environmental Rating
The PA 12 enclosure is rated IP67 and supports operation from -25 to +70 °C.
Official Specifications
| Operating Frequency | 13.56 MHz |
|---|---|
| Maximum Reading Range | 200 mm; dependent on transponder type |
| Radio Protocols | RF300-specific, ISO 15693 and ISO 18000-3 |
| Maximum Radio Transfer Rate | 106 kbit/s |
| Maximum Serial Transfer Rate | 115.2 kbit/s |
| Read Transfer Time | Approx. 0.13 ms per byte |
| Write Transfer Time | Approx. 0.13 ms per byte |
| Communication Interface | RS-232/RS-422 with 3964R protocol |
| Electrical Connection | M12, 8-pin |
| Rated Supply Voltage | 24 V DC |
| Permitted Supply Range | 20.4 to 28.8 V DC |
| Typical Current at 24 V | 0.15 A |
| Housing Material | PA 12 |
| Protection Class | IP67 |
| Operating Temperature | -25 to +70 °C |
| Maximum Shock Acceleration | 500 m/s² |
Frequently Asked Questions
Which transponder technologies can 6GT2801-3AB10 read and write?
Use compatible RF300 or ISO 15693 and ISO 18000-3 transponders within the validated reading-distance range.
What communication interface is used by 6GT2801-3AB10?
Connect the M12 eight-pin port to the approved RS-232 or RS-422 system interface configured for 3964R communication.
How far can 6GT2801-3AB10 read a transponder?
The maximum range is 200 mm, but the achieved distance depends on the transponder and installation conditions.
What supply must be provided to 6GT2801-3AB10?
Provide 24 V DC within the permitted 20.4 to 28.8 V range.
Can 6GT2801-3AB10 be installed in an exposed industrial location?
The enclosure is rated IP67 when the specified connectors and installation conditions are maintained.
What should be checked before replacing 6GT2801-3AB10?
Record the transponder type, serial link settings, supply wiring, reader position and proven reading distance.
What should be tested after installing 6GT2801-3AB10?
Confirm stable read and write operation at the required distance with the installed transponder and host communication settings.
Compatibility & Ordering Notes
Compatibility Checklist
- Use RF300 or supported ISO transponders only.
- Match the RS-232 or RS-422 3964R communication settings.
- Validate the achieved range with the installed transponder and mounting environment.
