EN
Siemens SCALANCE XB213-3LD Managed Industrial Ethernet Switch 6GK5213-3BF00-2AB2
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Product Overview
- Key Functions
- Official Specifications
- Frequently Asked Questions
- Compatibility & Ordering Notes
- Hot Selling Models
- Recommended Products
Overview
SIEMENS · SCALANCE XB-200
6GK5213-3BF00-2AB2 SCALANCE XB213-3LD Managed Industrial Ethernet Switch
The SCALANCE XB213-3LD is a managed Layer 2 switch with 13 Fast Ethernet RJ45 ports, three single-mode SC optical ports for long-distance links, a console port and redundant power input.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6GK5213-3BF00-2AB2 |
| Product Type | Managed Layer 2 Industrial Ethernet switch with long-distance single-mode fiber ports |
| Core Function | Links copper devices across extended single-mode fiber network segments |
| Application or Compatible Series | PROFINET and Industrial Ethernet networks requiring long optical runs |
Exact Identification
Match 6GK5213-3BF00-2AB2 character by character and confirm the complete SCALANCE XB213-3LD Managed Industrial Ethernet Switch designation.
Interface Arrangement
Confirm the installed supply, ports, field connections and required accessories before wiring the replacement.
Configuration Check
Preserve the approved engineering project, network parameters and application data used by the installed system.
Product Overview
The SCALANCE XB213-3LD is a managed Layer 2 switch with 13 Fast Ethernet RJ45 ports, three single-mode SC optical ports for long-distance links, a console port and redundant power input.
Three single-mode SC interfaces support extended network segments where multimode link distance is insufficient. PROFINET integration and switch management support structured diagnostics and network configuration. The IP20 housing and redundant supply terminals fit protected industrial control cabinets.
Key Functions
Long-Distance Optical Links
Three single-mode SC interfaces support extended network segments where multimode link distance is insufficient.
Managed Layer 2 Functions
PROFINET integration and switch management support structured diagnostics and network configuration.
Compact Rail-Mounted Hardware
The IP20 housing and redundant supply terminals fit protected industrial control cabinets.
Official Specifications
| Electrical Ports | 13 × 10/100 Mbps RJ45 |
|---|---|
| Optical Ports | 3 × single-mode SC |
| Optical Fiber Size | 9/125 µm |
| Maximum Optical Segment | 26 km |
| Permitted Fiber Attenuation at 1,310 nm | Maximum 0.5 dB/km |
| Console Connection | 1 |
| Supported Duplex Modes | Half duplex and full duplex |
| Automatic Cable Detection | Auto MDI-X |
| Rated Supply Voltage | 24 V DC |
| Rated Current Consumption | 400 mA |
| Power Loss | 9.6 W |
| Recommended Supply Fuse | F 2.5 A / 125 V |
| Operating Temperature | 0 to +60 °C |
| Storage / Transport Temperature | -40 to +70 °C |
| Relative Humidity | Up to 95%, non-condensing |
| Degree of Protection | IP20 |
| Dimensions | 120 × 117 × 109 mm |
| Approximate Weight | 500 g |
Frequently Asked Questions
What optical fiber is required for 6GK5213-3BF00-2AB2?
Use 9/125 µm single-mode fiber with SC terminations and verify the complete link-loss calculation.
How far can an optical link run from 6GK5213-3BF00-2AB2?
The specified maximum segment is 26 km when fiber attenuation and all connector or splice losses remain within the link budget.
Can multimode patch leads be used with 6GK5213-3BF00-2AB2?
No; the optical interfaces are intended for single-mode fiber, so the installed media and patching must match.
What optical checks help commission 6GK5213-3BF00-2AB2?
Confirm transmit-to-receive polarity, SC connector cleanliness, single-mode fiber type, total attenuation and end-device compatibility.
Which power arrangement is recommended for 6GK5213-3BF00-2AB2?
Use the redundant 24 V DC terminals with correctly protected supplies and verified polarity.
What configuration should be saved before replacing 6GK5213-3BF00-2AB2?
Preserve the device name, IP settings, VLANs, redundancy settings, access controls and port configuration.
Where may 6GK5213-3BF00-2AB2 be installed?
Install it inside a suitable cabinet that provides the required environmental protection for an IP20 device.
Compatibility & Ordering Notes
Compatibility Checklist
- Use 9/125 µm single-mode fiber and calculate connector, splice and cable losses for every optical segment.
- Confirm that the far-end optical interface supports the same wavelength and link characteristics.
- Restore the approved PROFINET and managed-switch settings after hardware replacement.
