EN
Siemens SCALANCE X308-2 6GK5308-2FL00-2AA3 Managed Industrial Ethernet Switch
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Product Overview
- Key Functions
- Official Specifications
- Frequently Asked Questions
- Compatibility & Ordering Notes
- Hot Selling Models
- Recommended Products
Overview
SIEMENS SCALANCE X-300
6GK5308-2FL00-2AA3 X308-2 Managed Industrial Ethernet Switch
A managed industrial Ethernet switch with two Gigabit multimode SC fiber ports, one Gigabit copper port and seven Fast Ethernet copper ports.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6GK5308-2FL00-2AA3 |
| Product Type | X308-2 Managed Industrial Ethernet Switch |
| Core Function | Builds managed copper-and-fiber industrial Ethernet networks |
| Application or Compatible Series | SCALANCE X-300 networks, SIMATIC and PROFINET installations |
Engineering Fit
Suitable for line, star and ring topologies that require managed switching with a multimode fiber uplink.
Configuration Focus
Confirm fiber type, port speeds, redundant 24 V DC supply, management settings and firmware level.
Replacement Check
Match the X308-2 variant carefully; LD, LH and LH+ versions use different optical interfaces.
Product Overview
The SCALANCE X308-2 combines managed copper switching with two 1000 Mbps multimode SC fiber ports for robust industrial network structures. Seven RJ45 ports support 10/100 Mbps and one RJ45 port supports 10/100/1000 Mbps.
Management functions and support for redundant 24 V DC power make it suitable for SIMATIC and PROFINET network segments that require diagnostics and resilient topology design.
Key Functions
Managed Industrial Switching
Provides configurable switching, diagnostics and network-management functions for plant networks.
Mixed Copper and Fiber Connectivity
Combines eight RJ45 ports with two Gigabit multimode SC fiber ports.
Redundant Power Connection
Supports redundant connection of the 24 V DC safety extra-low-voltage supply.
PRP Compatibility
Supports PRP applications from firmware version V3.7.0 when used in the specified network architecture.
Official Specifications
| Multimode Fiber Ports | 2 × SC duplex, 1000 Mbps |
|---|---|
| Gigabit Copper Ports | 1 × RJ45, 10/100/1000 Mbps |
| Fast Ethernet Copper Ports | 7 × RJ45, 10/100 Mbps |
| Copper Duplex Modes | Half/full duplex according to port speed |
| Rated Supply Voltage | 24 V DC SELV |
| Normal Voltage Range | 19.2–28.8 V DC |
| Permitted Range Including Ripple | 18–32 V DC |
| Current Consumption at 24 V | 400 mA |
| Power Loss at 24 V | 9.6 W |
| Input Overcurrent Protection | 3 A / 32 V, non-replaceable fuse |
| Signaling Contact Load | Maximum 100 mA at 24 V DC SELV |
| Dimensions | 120 × 125 × 123 mm |
| Weight | 1,400 g |
| Degree of Protection | IP30 |
| Mounting Options | DIN rail, S7-300 rail or wall |
| PRP-Compatible Firmware | V3.7.0 or later |
Frequently Asked Questions
Which fiber type is used by 6GK5308-2FL00-2AA3?
Use multimode fiber with the two SC duplex Gigabit interfaces.
How many copper ports are available on 6GK5308-2FL00-2AA3?
It provides seven 10/100 Mbps RJ45 ports and one 10/100/1000 Mbps RJ45 port.
Can 6GK5308-2FL00-2AA3 use redundant power supplies?
Yes, the 24 V DC safety extra-low-voltage input can be connected redundantly.
Which mounting methods support 6GK5308-2FL00-2AA3?
It can be mounted on a DIN rail, an S7-300 rail or a wall.
What should be restored when replacing 6GK5308-2FL00-2AA3?
Restore the management configuration, VLANs, redundancy settings, IP parameters and any C-PLUG data.
From which firmware can 6GK5308-2FL00-2AA3 participate in PRP applications?
PRP compatibility is specified from firmware version V3.7.0.
What enclosure protection should be provided for 6GK5308-2FL00-2AA3?
Install the IP30 device inside a suitable protected industrial enclosure.
Compatibility & Ordering Notes
Compatibility Checks
- Use multimode fiber for both 1000 Mbps SC ports.
- Verify the redundant 24 V DC SELV supply arrangement.
- Back up VLAN, redundancy and management settings.
- Install the IP30 device in an appropriate protected enclosure.
